National Cycle ZTechnik VStream Z2348 User manual

Thank you for purchasing a ZTechnik product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
screen for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
PACKAGE CONTENTS
ITEM DESCRIPTION QTY.
AVStream Windscreen 1
TOOLS REQUIRED
T-25 Torx Wrench
ALL OEM FASTENERS AND
GROMMETS WILL BE REUSED.
Figure 1
PREPARATION
Place motorcycle securely on its centerstand.
All OEM fasteners and grommets will be
reused.
OEM WINDSCREEN REMOVAL
Figure 1
With a T-25 Torx Wrench, loosen and remove the four
M5X20 Body Screws and two Trim Panels holding the
OEM Windscreen to the fairing’s Windscreen
Reinforcement Bracket.
Remove the OEM Windscreen.
Remove the four OEM Rubber Grommets from the OEM
WIndscreen and install them in your new VStream
Windscreen (A).
Description: VStream® Replacement Windscreen Model: 2021-Later BMW® R1250RT
Part Number: Z2348/Z2349 Installation Time: 15 min. Difficulty Level: Easy
ATTENTION: Special notes and cautionary measures which
can prevent damage to the accessory or vehicle.
NOTE: Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
Quantum® Hardcoated Polycarbonate
VStream® Windscreen for:
2021~ BMW® R1250RT
Z2348 Clear, Touring
Z2349 Clear, Tall Touring
VStream® Windscreen Patent No. 7,387,328
ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2022 National Cycle, Inc. Page 1 of 2 10-129507-000 10/22

ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2022 National Cycle, Inc. Page 2 of 2 10-129507-000 10/22
Figure 2
VSTREAM WINDSCREEN INSTALLATION
Figure 2
Place your new VStream Windscreen (A) into position
and align the mount holes with the Windscreen
Reinforcement Bracket.
Start with one Trim Panel on the Windscreen and thread
in two M5X20 Body Screws until they begin to seat.
Add the second Trim Panel with the remaining two
M5X20 Body Screws.
With a T-25 Torx Wrench, tighten the four screws secure-
ly, but do not over-torque them.
Ride safe and enjoy your new VStream Windscreen!
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap
such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths. Paint, glue residue or grease
removal: Moisten cotton wad with naphtha or turpentine followed by a wash as above.
National Cycle Shield Wash™ (N1401-01) makes a good daily cleaner and comes with a handy travel-size bottle.
Shield Wash is safe for all windshields and helmet visors
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with household glass cleaners.
Do not allow brake fluid, alcohol, or strong solvents to contact the screen.
RAIN REPELLENT
Do not use rain protective products made for glass. We recommend National Cycle’s RainZip® (N1410-01) to keep your windscreen clear in rainy weather.
Register Your Windshield Online at www.nationalcycle.com
ZTechnik by National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield for a period of three years from the date of purchase against
breakage. This limited warranty is expressly limited to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating failure,
cosmetic wear and tear, replacement of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replacement, inconven-
ience, inbound freight expenses or damage to any other component of the motorcycle or any other accessories. Certain chemicals, generally known as acidic hydrocarbons,
are known to cause polycarbonate damage and will not be covered under this limited warranty. Please refer to the cleaning instructions supplied with all National Cycle
windshields.
Visit www.nationalcycle.com for further details, or call or e-mail National Cycle.
Never ride your motorcycle with loose accessory mounting hardware. Check the hardware for tightness regularly.
Today’s motorcycles are built to withstand the moderate loads imposed on them by the foreseeable addition of an accessory(ies). If an accessory(ies) adversely affects your motorcycle's stability, imme-
diately remove the accessory(ies). Do not ride a motorcycle that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling problems associated with an accessory(ies), contact
your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunlight reflected off the inside curvature of the windscreen can, at certain times of day, cause extreme heat buildup on the motorcycles instruments and possibly even melt them.
Exercise care in parking to avoid this. Park your motorcycle facing the sun or place an opaque object over this area.
WARNING