NEC SV8300 User manual

Page 1 of 2
North American Telecommunications Group
For Service: 604-856-9155 / [e-mail]
SV8300 TELEPHONE QUICK REFERENCE
DIAL OUT:
Lift handset, (or press SPEAKER key) dial 9
INTERCOM CALLS
Lift handset, (or press SPEAKER)
Dial extension number
TRANSFER ACALL
With active call press TRANSFER Key
Dial extension (OR a pre-programmed key)
Announce call (optional),
hang up for transfer to go through
Note:Press VMTRF Soft Key after the ext to transfer call direct to person’s mailbox
PARK A CALL:
With active call press PARK SET key;
(system will assign call to a park zone, which will show on your display ex: 01)
Intercom or Page employee and announce the parked call
To Retrieve Call: Press PARK RETRV key and dial code where call was parked ex: 01
LAST NUMBER REDIAL
Press REDIAL key repeatedly to review last 5 numbers dialed:
Press #for system to dial number on display
CONFERENCE CALLS
With active call, press TRANSFER key
Dial 9 for another line, make 2nd call (or dial an extension number)
Press CONF key
CALL FORWARD (IF APPLICABLE)
Press SPEAKER key
Press CALL FWD key
Enter (if all calls to go straight to your mailbox) OR enter another person’s
ext OR enter 9 plus a telephone number for calls to go off premise: NOTE: this
takes 2 outside lines when in effect
Press SPEAKER
To Cancel:press speaker then CALL FWD Key then *, press speaker

Page 2 of 2
North American Telecommunications Group
For Service: 604-856-9155 / [e-mail]
DO NOT DISTURB (IF APPLICABLE)
Press SPEAKER
Press DND key
Press SPEAKER key again
ONE-TOUCH KEY PROGRAMMING
Press FEATURE key
Press key to be programmed
Enter an ext number (OR 9 then a telephone number)
Press FEATURE key
Note:when a one touch key is programmed it takes one of the station bin numbers
from the 00-19 allowed in station speed dial
STATION SPEED DIAL PROGRAMMING
Press STA Soft key
Press ↑PREV or ↓NEXT to choose a bin 00-19
Press ENTRY, then NUMBER
Enter 9plus the desired number, then press SET
Press NAME: spell out name (#after each letter),
Press SET
Press OK
USING STATION SPEED DIAL
Press REDIAL then a code (00-19)
OR
Press STA, ↑PREV or ↓NEXT to scroll through speed dials
Lift handset when desired speed dial is displayed
RING TONE
Press FEATURE key then 3
Press 3repeatedly to hear/set different ring tones
Press FEATURE key when done
RING VOLUME
Press FEATURE key then 3
Use arrow keys to adjust volume
Press FEATURE key when done