Nederman CX 5500 User manual

N0. 148258 00
DAT.1998-10-26 CX 5500
Operating and Instruction manual

ENGLISH CX 5500
2
Cx 5500
Part No. 503141
Control No. 96370
In: 230 V, 50/60 Hz, 85 W.
Out: 30 V 50/60 Hz.
Made in Sweden
m=8.6 kg = 43 dB(A) U = 120/230 V
f = 50/60 Hz
T = 0 - 30˚ C
Technical data
Must only be used for
* Spot suction of soldering fume.
* Spot suction of gases (No explosive gases).
Machine markings
1
2
3
4
5
6
7
8
Safety regulations
CE-marking
The CE-marking on the machine denotes that the
machine has been manufactured in conformity with
standards and directive stated in "Declaration of
conformity".
Our levels of warning/Information are:
WARNING ! = Possible risk of severe injury or
death if you do not follow the given instructions.
CAUTION ! = Possible risk that the machine may
be damaged or injury if you do not follow the given
instructions.
NOTE ! = Important notes/information.
Electricity
Electrical repairs or maintenance may only be
performed by specially-trained personnel.
Explosive environment
The machine must not be used in an explosive
environment.
Rating plate
1 Logotype
2 Name of Product
3 Part number
4 Control number
5 Electrical data
CE plate
6 CE mark, see ”Declaration of conformity”
7 Manufacturer
8 Address of the Manufacturer
AB Lectrostatic
Box 314, Axvallagatan 3
S-532 24 Skara, Sweden

CX 5500 ENGLISH
3
a
a a
a a a a
aa a
aa
aaa
a a a
a a
a a aa
a a
aa
a a a
a
a aa
a
a
a
a
a
a a
a
a
a
a aa
aa
a
a
a
a a a a a
a
a
a
a
a a
a
a
a
a aa
aa
a
a
Installation
CAUTION !
It is very important that all users of the machine
carefully read this user instructions manual
before the machine is installed and put to use.
Install the CX 5500 as follows:
1 Connect the unit's cable (27) to a main socket
with required voltage, according to rating plate.
CAUTION !
The filter unit must be placed in a ventilated
room on a hard and flat surface to provide
enough cooling air for the motor.
Operating instructions
The machine is designed for spot suction. The
fume is sucked into the filter unit via a spot
extraction and hoses. Inside the filter unit, the fume
is sucked down through the main filter. The filtered
fume is pressed uppwards through the centre hole
(main filtre) and through the HEPA filter. When the
fume has been cleaned it turns down again and is
recycled in to the working area.
Fault-finding check list
WARNING !
Remove plug from electricity supply before
carrying out any work on the motor unit.
Poor suction:
* Check that hoses and connections are tight.
* Check that the hose is not blocked.
* Check and replace the particle/gas filter as
neccessary.
* Check and replace the HEPA filter as
neccessary.
Motor failure.
* Check the fuses.
* Check the electrical connections.
* Check the carbon brushes. Contact your
supplier.
* The thermal fuse is blown. Contact your
supplier.
27

ENGLISH CX 5500
4
a
a a
a a a a
aa a
aa
aaa
a a a
a a
a a aa
a a
aa
a a a
a
a aa
a
a
a
a
a
a a
a
a
a
a aa
aa
a
a
a
a a a a a
a
a
a
a
a a
a
a
a
a aa
aa
a
a
19
9
18
1
2
24
21
23
25
22
20
5
Filter change
The machine's filters should be replaced when the
suction level becomes reduced.
Turn off the machine.
Replacing the particle/gas filter:
1 Turn the filter unit on it's side.
2 Undo the lock knob (5) under the filter unit.
3 Remove the lower part, containing the filter.
4 Fit the new filter.
5 Remount the lock knob and re-tighten, until the
sealing ring (20) is compressed.
6 Raise the filter unit to upright position.
7 Connect the filter unit again and start up.
Replacing the HEPA filter:
1 Undo all four lock knobs (2) on the top cover
(1).
2 Remove the top cover and lift up the used filter
(9).
3 Check/replace the plastic material (18) as
necessary.
4 Fit the new HEPA filter and re-fit the top cover.
5 Tighten the lock knobs again.
6 Connect the filter unit again and start up.
Replacing fuses
Turn off the machine and disconnect it from the
main socket.
Replacing the fuse:
1 Undo the lock knobs (2) on the top cover (1).
2 Remove the top cover and lift up the used filter
(9).
3 Check/replace the plastic material (18).
4 Undo the six lock screws (19) and remove the
cover (21) for the motor assembly.
5 Remove the silencing material (22).
6 Replace the fuse (23).
7 Re-assemble the machine.
8 Connect the filter unit again and start up.
Replacing the thermal fuse:
1 Undo the lock knobs (2) on the top cover (1).
2 Remove the top cover and lift up the used filter
(9).
3 Check/replace the plastic material (18).
4 Undo the six lock screws (19) and remove the
cover (21) for the motor assembly.
5 Remove the silencing material (22).
6 Dismount the mounting plate (24) and lift it out
from the machine.
7 Replace the thermal fuse (25).
8 Re-assemble the machine.
9 Connect the filter unit again and start up.

CX 5500 ENGLISH
5
580655
Fuse 2,0 A (120V)
580665
Fuse1,0 A (230V)
Spare parts
371503
HEPA filter
371602
Thermal fuse
77˚C
371506
Partikel/Gasfilter
371514
Motor
371518
Carbon brushes
Order instruction
When ordering spare parts always state:
- Part no. and control no. (from the type label of the product).
- Part no. of the spare part and the name.
- Quantity of the parts required.

ESPAÑOL
NEDERLANDS
ENGLISH
FRANÇAIS
ITALIANO
DEUTSCH
Konformitätserklärung
Wir, AB Lectrostatic, erklären in alleiniger Verant-wortung, daß
das Produkt CX 5500 auf das sich diese Erklärung bezieht, it
den folgenden Nor en oder nor ativen Doku enten
übereinsti t: En 60335, EN 55014, EN 61000-4-4,
Ge äß den Besti ungen der Richtlinie 89/392/EEC,
89/336/EEC, 73/23/EEC, 93/68/EEC.
Declaraçáo de conformidade
Nós, AB Lectrostatic declara os sob nossa única
responsabilidade que o produto CX 5500 a que se refere esta
declaraçáo está e confor idade co as Nor as ou outros
docu entos nor ativos EN 60335, EN 55014, EN 61000-4-4
e confor idade co o disposto na Directiva 89/392/EEC,
89/336/EEC, 73/23/EEC, 93/68/EEC.
Overeenkomstigheidsverklaring
Wij, AB Lectrostatic., verklaren geheel onder eigen
verantwoordelijkheid dat het produkt CX 5500 waarop deze
verklaring betrekking heeft, in overeenste ing is et de
volgende nor en of andere nor atieve docu enten
EN 60335, EN 55014, EN 61000-4-4 volgens de bepalingen
van 89/392/EEC, 89/336/EEC, 73/23/EEC, 93/68/EEC.
Dichiarazione di conformità
Noi, AB Lectrostatic, dichiaria o sotto la nostra esclusiva
responsabilità che il prodotto CX 5500 al quale questa
dichlarazione si riferrisce è confor e alla seguente nor a
o ad altri docu enti nor ativi EN 60335, EN 55014,
EN 61000-4-4 in base a previsto dalla direttiva
89/392/EEC, 89/336/EEC, 73/23/EEC, 93/68/EEC.
Declaraci n de Conformidad
AB Lectrostatic declara os bajo nuestra exclusiva
responsabilidad la confir idad del producto CX 5500 al que
se refiere esta declaración, con las nor as u otros
docu entos nor ativos: EN 60335, EN 55014, EN 61000-4-4
de acuerdo con las disposiciones de Directiva 89/392/EEC,
89/336/EEC, 73/23/EEC, 93/68/EEC.
Déclaration de conformité
Nous, AB Lectrostatic, déclarons sous notre seule
responsabilité que le produit CX 5500 auquel se réfere
cette déclaration est confor e à la aux nor es ou autres
docu ents nor atifs EN 60335, EN 55014, EN 61000-4-4
confor é ent aux dispositions de Directive: 89/392/EEC,
89/336/EEC, 73/23/EEC, 93/68/EEC.
Declaration of conformity
We, AB Lectrostatic, declare under our sole responsibility
that the product CX 5500 to which this declaration relates is
in confor ity with the following standards or other nor ative
docu ents: EN 60335, EN 55014, EN 61000-4-4 following
the provisions of Directive 89/392/EEC, 89/336/EEC, 73/23/
EEC, 93/68/EEC.
PORTUGUÊS
SUOMI
Vaatimustenmukaisuusvakuutus
Me, AB Lectrostatic, vakuutta e o alla vas-tuullaa e,
että seuraava tuote: CX 5500 , johon tä ä vakuutus liityy, on
seuraavien standardien tai uiden nor atiivisten asiakirjojen
vaati usten ukainen EN 60335, EN 55014, EN 61000-4-4 ja
noudattaa direktiivin ääräyksiä 89/392/EEC, 89/336/EEC,
73/23/EEC, 93/68/EEC.
Försäkran (erklæring) om överensstämmelse
Vi, AB Lectrostatic, försäkrar (erklærer) under eget ansvar
att produkten CX 5500 so o fattas (dekkes) av denna
försäkran (erklæring) är i överensstä else ed följande
standarder eller andra regelgivande (nor ative) doku ent:
EN 60335, EN 55014, EN 61000-4-4 enligt villkoren i (henhold til)
direktiven 89/392/EEC, 89/336/EEC, 73/23/EEC, 93/68/EEC.
SVENSKA (NORSK DANSK)
NO. 148258 00
AB Lectrostatic
Box 314
Axvallagatan 3
S-532 24 SKARA, Sweden
1999-04-08
Tho as Nilsson, Managing Director