Neilsen CT1109 User manual

2.5 GALLON PORTABLE SANDBLASTER CT1109
ORIGINAL INSTRUCTIONS
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

2
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety and
health requirements of the EC Directive based on its design and type, as brought
into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration will
lose its validity.
Product description: 2.5 GALLON PORTABLE SANDBLASTER
Model: CT1109
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
Harmonized standards
Annex 1 of 2006/42/EC
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2020-07-15

3
GENERAL SAFETY RULES
1. Read this instruction manual before connecting the sandblaster to a
compressor.
2. Do not use any silica based abrasives with this tool. Silica based
abrasives have been linked to severe respiratory disease. Always use
recommended abrasives
3. Read this manual carefully, Learn the tool's applications and limitations,
as well as potential hazards specific to it.
4. Do not expose tool to moisture. Don't use this tool in damp or wet
locations, Keep out of rain.
5. Keep work area clean and well lit. Cluttered or dark work areas invite
accidents.
6. Keep children away. All children should be kept away from the work area.
Never let a child handle a tool without strict adult supervision
7. Do not operate this tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not attempt to
operate.
8. Use safety equipment. Dust mask, non-skid safety shoes, hard hat, or
hearing protection should be used in appropriate conditions.
9. Don't overreach, Keep proper footing and balance at all times when
operating this product.
10. Always disconnect the tool from the air supply and release pressure from
the tank before storing, servicing, or changing accessories

4
11. Do not point the sandblaster at anyone or any objects other than the
intended work object
12. Check your sandblaster regularly for damage, If part of the sandblaster is
damaged it should be carefully inspected to make sure that it can perform
its intended function correctly. If in doubt, the part should be repaired.
Refer all servicing to a qualified technician. Consult your dealer for advice.
13. Do not attempt to operate this tool near flammable materials or
combustibles. Failure to comply may cause serious injury
14. Store idle tools out of the reach of children and untrained persons. Tools
may be dangerous in the hands of untrained users.
15.
Do not allow sandblaster to sit pressurized while unattended or not in use

5
OPERATING
1. Open cap and fill with abrasives
2. Attach supplied hose to sand container and gun
3. Attach compressor hose to inlet nipple on gun
4. Affix shoulder harness
5. Wear proper gloves and safety glasses
6. Set compressor to 90-125 psi
7. Spray desired area with gun
FEATURES AND TECHNICAL DATA
●
Minimum compressor requirement: 3 HP, 90 PSI
●
Operating pressure: 125 PSI
●
45’’ rubber hose
●
2.5 gallon capacity
● Heavy duty sandblast gun nozzle
●
Seamless polyethylene hopper
●
This high-quality air sandblater kit works with glass beads, sand and
aluminium oxide.
●
It is ideal for hobbyist or professional users to remove rusts, old paints, dirt,
burrs from almost any surface, such as brick stone or walls, metals, on
cars, especially car wheels.

6
PARTS DIAGRAM
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China