Neilsen CT1703 User manual

MODEL NO.:
CT1703, CT1707, CT2146, CT1702, CT2886
VIBRATORY PLATE
PETROL COMPACTOR
ORICINAL INSTRUCTIONS
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
WARNING
To reduce the risk of injury, all operators and maintenance personal must read and
understand the instructions before operating, changing accessories, or performing
maintenance on there products. All possible solution can not be covered in these
instructions. Care must be exercised by everyone using or maintaining.

CONTENTS
1. INSTRUCTION
2. APPLICATION
3. FUCTIONS AND CONTROLS
4. ACCESSORIES
5. HAZARDS & RISKS
6. INSPECTION & OPERATION
7. MAINTANENCE & SERVICE
8. SPECIFICATIONS
9. TROUBLE SHOOTING
10. NEW HAND MOUNTING（IF APPLICABLE）
EC DECLARATION OF CONFORMITY
We, CANNON TOOLS LTD
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K
Declare that the following machine complies with the appropriate basic safety and
health requirements of the EC Directive based on its design and type, as brought into
circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration will lose
its validity.
Product description: PETROL COMPACTOR
Model: CT1703 CT1707 CT2146 CT1702 CT2886
Appropriate EC directives:
-EC-Machinery Directive 2006/42/EC
-EC-Directives on noise emission in the environment by equipment for
use outdoors 2000/14/EC, 2005/88/EC
Applicable Harmonized Standards:
EN 500-1, EN 500-4, ZEK 01.4-08/11.11, EN ISO 3744
CANNON TOOLS LTD
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Managing Director
Sign
Mr. Gurcharan Tony Singh Sanghera
2016.08.11

1. INSTRUCTION
THANKS FOR YOUR SLECTION OF OUR PRODUCTS. WITH THE
TECHNOLOGY INTRODUCTED FROM JAPAN, THIS SERIES OF PRODUCTS
HAVE THE ADVANTAGES OF SMALL VOLUME, LIGHT WEIGHT, GRACE
APPERANCE AND DURABLE MECHANICAL STRUCTURE.
GENERAL SAFETY INSTRUCTIONS FOR THE OPERATION OF POWER
EQUIPMENT
OUR GOAL IS TO SUPPLY LIGHT CONSTRUCTION MACHINERY THAT
HELPS OPERATOR WORK SAFETY AND EFFICIENTLY. THE MOST
IMPORTANT SAFETY DEVICE FOR THIS OR ANY TOOLS IS THE OPERATOR.
CARE AND GOOD JUDGEMENT ARE THE BEST PROTECTION AGAINST
INJURY. ALL POSSIBLE HAZARDS CANNOT BE COVERED HERE, BUT WE
HAVE TRIED TO HIGHLIGHT SOME OF THE IMPORTANT ITEMS,
INDIVIDUALS SHOULD LOOK FOR ADVENTURE CAUTION, WARNING AND
DANGER SIGNS MARKED ON EQUIPMENT AND DISPLAYED IN THE
WORKPLACE, OPERATORS SHOULD READ AND FOLLOW SAFETY
INSTRUCTIONS PACKED WITH EACH PRODUCTS.
LEARN HOW EACH MACHINE WORKS, EVEN IF YOU HAVE PREVIOUSLY
USED SIMILAR MACHINES, CAREFULLY CHECK OUT EACH MACHINE
BEFORE YOU USE IT . GET THE “FEEL” OF IT AND KNOW ITS CAPABILITIES,
LIMITATIONS, POTENTIAL HAZARDS, HOW IT OPERATES, AND HOW IT
STOPS.
2. APPLICATION
TRENCH COMPACTION EARTHWORKS
ROAD MAINTENANCE LANDSCAPING
BRICKPAVING DRIVEWAY TOPPINGS
3.FUNCTIONS AND CONTROLS
MOTOR
PLS READ THE ATTACHED INSTRUCTION MANUAL FOR GASOLINE ENGINE
MOTOR CAREFULLY BEFORE USING IT.
DRIVE BELT
TENSION OF THE DRIVE BELT IS ADJUSTABLE. LOOSEN THE FOUR NUTS
ON THE BOLTS WHICH SECURE THE MOTOR TO THE BASEPLATE. ADJUST

THE SET SCREWS WHICH BEAR AGAINST THE MOTOR CRANKCASE TO
ACHIEVE THE REQUIRED BELT TENSION. ENSURE THAT FOUR NUTS AND
THE SET SCREW LOCKNUTS ARE TIGHTENED AFTER ADJUSTMENT.
4. ACCESSORIES
TRANSPORT TROLLEY – FACILITATES HANDLING, HOOKS INTO THE
BASE-PLATE. FITTED WITH 200MM RUBBER TYPES.
WATER TANK KIT – FOR DUST REDUCTION, CEMENT STABLISED SOIL,
BITUMEN HOT MIX. (THERE ARE JUST MODEL C-77W HAVE THE WATER
TANK KIT ATTACHED ON THE MACHINE.)
5. HAZARDS AND RISKS
NEVER ALLOW ANY PERSON TO OPERATE THE MACHINE WITHOUT
ADEQUATE INSTRUCTION.
ENSURE ALL OPERATORS READ, UNDERSTAND AND FOLLOW THE
OPERATING INSTRUCTIONS.
SERIOUS INJURY COULD RESULT FROM IMPROPER OR CARELESS USE
OF MACHINE
PLATE COMPACTORS ARE HEAVY UNITS AND SHOULD BE POSITIONED BY
TWO PEOPLE OF APPROPRIATED STRENTH, USING THE LIFTING HANDLES
PROVIDED ON THE MACHINE, ALONG WITH CORRECT LIFTING
TECHNIQUES.
5.1 MECHANICAL HAZARDS
DON’T OPERATE THE MACHINE UNLESS ALL PROTECTIVE GUARDS ARE IN
ITS PLACE.
KEEP HANDS AND FEEL CLEAR OF ROTATING AND MOVING PARTS AS
THEY WILL CAUSE INJURY IF CONTACTED.
ENSURE THAT THE MOTOR OPERATION SWITCH IS IN THE OFF POSITION
AND THE SPARK PLUG IGNITION LEAD IS DISCONNECTED BEFORE
REMOVING THE GUARDS OR MAKING ADJUSTMENTS.
ENSURE BOTH THE MACHINE AND THE OPERATOR ARE STABLE BY
SETTING UP ON LEVEL TERRAIN AND THE MACHINE WILL NOT TIP OVER,
SLIDE OR FALL WHILE IN OPERATION AND UNATTENDED.
DO NOT LEAVE THE MACHINE IN OPERATION WHILE IT IS UNATTENDED.
ENSURE THAT THE WALLS OF A TRENCH ARE STABLE AND WILL NOT
COLLAPSE DUE TO THE ACTION OF THE VIBRATION , PRIOR TO
COMMENCING COMPACTION.

ENSURE THAT THE AREA TO BE COMPACTED DOES NOT CONTAIN ANY
“LIVE” ELECTRICAL CABLES, GAS, WATER OR COMMUNICATIONSERVICE’S
WHICH MAY BE DAMAGED BY THE ACTION OF THE VIBRATION.
EXERCISE CARE WHEN OPERATING UNIT, EXPOSURE TO VIBRATION OR
REPETITIVE WORK ACTIONS MAY BE HARMFUL TO HANDS AND ARMS
NEVER STAND ON THE UNIT WHILE IT IS OPERATING.
DO NOT INCREASE THE GOVERNED NO-LOAD MOTOR SPEED ABOVE 3500
RPM . ANY INCREASE MAY RESULT IN PERSONAL INJURY AND DAMAGE TO
THE MACHINE.
BE CAREFUL NOT TO COME IN CONTACT WITH THE MUFFIER WHEN THE
ENGINEIS HOT, SINCE IT CAN CUASE SERVERE BURNS.
ENSURE THAT REPAIRS TO THE MOTOR AND MACHINE ARE CARRIED OUT
BY COMPETENT PERSONNEL.
5.2 FIRE AND EXPLOSION HAZARDS
PETROL OR DIESEL OIL IS EXTREMELY FLAMMABLE AND EXPLOSIVE
UNDER CERTIAIN CONDITIONS.
ENSURE THAT FUEL IS ONLY STORED IN AN APPROVED STORAGE
CONTAINER.
DO NOT REFUEL THE MOTOR WHILE IT IS IN OPERATION OR HOT.
DO NOT REFUEL THE MOTOR IN THE VICINITY OF SPARKS, A NAKED
FLAME OR A PERSON SMOKING.
DO NOT OVER FILL THE FUEL TANK AND AVOID SPILLING OIL WHEN
REFUELLING. SPILLED OIL OR ITS VAPOUR MAY IGNITE. IF SPILLAGE
OCCURS, ENSURE THAT THE AREA IS DRY BEFORE STARTING THE
MOTOR.
ENSURE THAT THE FUEL TANK CAP IS SECURELY FITTED AFTER
REFUELLING.
5.3 CHEMICAL HAZARDS

DO NOT OPERATE OR REFUEL A PETROL OR DISEAL MOTOR IN A
CONFINED AREA WITHOUT ADEQUATE VENTILATION.
CARBON MONOXIDE EXHAUST GASES FROM INTERNAL COMBUSTION
MOTOR DRIVEN UNITS CAN CAUSE DEATH IN CONFINED SPACES.
5.4 NOISE HAZARDS
EXCESSIVE NOISE CAN LEAD TO TEMPORARY OR PERMANENT LOSS OF
HEARING.
WEARING AN APPROVED HEARING PROTECTION DEVICE TO LIMIT NOISE
EXPOSURE. AS REQUIRED BY OCCUPATIONAL HEALTH AND SAFETY
REGULATIONS.
5.5 PROTECTIVE CLOTHING
ALWAYS WEAR APPROVED HEARING PROTECTION WHEN WORKING IN A
CONFINED WORK SPACE. PROTECTIVE GOOGLES AND A DUST MASK
SHOUILD BE WORN WHEN WORKING IN A DUSTY ENVIRONMENT.
PROTECTIVE CLOTHING AND FOOTWEAR MAY ALSO BE DESIRABLE WHEN
WORKING WITH HOT MIX MITURMEN.
5.6 ADDITIONAL HAZARDS
SLIP/TRIP/FALL IS A MAJOR CAUSE OF SERIOUS INJURY OR DEATH.
BEWARE OF UNEVEN OR SPLIPPERY WORK SURFACES.
EXERCISE CARE WHEN WORKING IN THE VICINITY OF UNPROTECTED
HOLES OR EXCAVATION.
6. INSPECTION & OPERATION
THE MACHINE IS BEST SUITED TO THE COMPACTION OF BITUMINOUS AND
GRANULAR MATERIAL E.G. GRANULAR SOILS, GRAVELS AND SANDS OR
MIXTURES OF BOTH ,COHESIVE SOILS SUCH AS SILT AND CLAY ARE BEST
COMPACTED USING THE IMPACT FORCE PRODUCED BY A VIBRATING
RAMMER.

WHERE POSSIBLE THE SITE SHOULD BE GRADED AND LEVELLED BEFORE
COMMENCING COMPACTION.
CORRECT MOISTURE CONTENT IN SOIL IS VITAL TO PROPER COMPACTION.
WATER ACTS AS A LUBRICANT TO HELP SLIDE SOIL PARTICLES TOGTHER.
TOO LITTLE MOISTURE MEANS INADEQUATE COMPACTION ; TOO MUCH
MOISTURE LEAVES WATER-FILLED VOIDS THAT WEAKEN THE SOIL’S
LOAD-BEARING ABLITY.
COMPACTION OF DRY MATERIALS WILL BE FACILITED BY MOISTENING WITH A
WATER HOSE FITTED WITH A SPRINKLER.
EXCESSIVE WATERING OR WATER CONTENT WILL CAUSE THE MACHINE TO
STALL.
THE OPTIONAL WATER TANK KIT IS RECOMMENDED WHEN THE MACHINE IS
USED ON BILUMINOUS SURFACES AS THE WATER FILM PREVENTS A BUILD
UP OF MATERIAL ON THE UNDERSIDE OF THE PLATE.
THE VIBRATORY MOTION PROVIDES A SELF PROPEILING ACTION. POSITON
THE HANDLE AT THE OPPOSITE END OF THE MACHINE TO THE VIBRATOR ,
START THE MOTOR USING THE RECOIL STARTER. (IF THE MOTOR IS FITTED
WITH AN ON/OFF SWITCH THIS MUST FIRST BE TURNED TO ON BEFORE
STARTING.)
FOR MORE INFORMATION ON STARTING AND CORRECT OPERATING
PROCEDURES OF THE MOTOR, REFER TO THE MOTOR OPERATION MANUAL
SUPPLIED WITH THE UNIT.
INCREASE THE MOTOR SPEED TO THE MAXIMUM SETTING USING THE HAND
THROTTLE LEVER, BEFORE COMMENCING COMPACTING.
THE MACHINE SHOULD BE CONTROLLED BY GRASPING THE HANDLE WITH
BOTH HANDS AND APPLYING RESTRAINT TO CONTROL THE FORWARD
MOTION.
STEER THE MACHINE BY MOVING THE HANDLE SIDEWAYS TO THE RIGHT OR
LEFT.
ALWAYS MAINTAIN GOOD FOOTING SO THAT YOU DO NOT SLIP AND LOOSE
CONTROL WHEN STARTING OR OPERATING THE MACHINE.
IF THE OPTIONAL WATER TANK IS FITTED , THE FLOW RATE CAN BE
CONTROLLED BY ADJUSTING THE COCK IN THE SUPPLY HOSE TO THE
SPRINKLER BAR.

PLS READ THE ATTACHED INSTRUCTION MANUAL FOR DIESEL
(GASOLINE) ENGINE MOTOR CAREFULLY BEFORE USING