Neilsen CT3876 User manual

REAR AXLE BUSHING REMOVER & INSTALLATION KIT
- BMW E36, E46, E85
CT3876
INTENDED USE
Removal and replacement tool for metallic bushes on rear axles BMW type E36, E46, E85.
Replacement of the mounting bushes without removing the complete rear axle assembly.
Applicable: BMW E36, E46, E85.

SAFETY ADVICE
•Read carefully the instructions before working with this tool set.
•Do not use this tool set for other purpose for which it is designed.
•Lifting of vehicles only allowed on the special lifting points.
•Before starting work under a car always ensure that it is adequately supported by axle stands
or ramps. Chock wheels and ensure that the hand brake is firmly applied.
•Always use approved eye protection, especially when working under vehicles.
•Ensure a secure and well-gripped stance during fitting.
•Ensure that tools are correctly mounted.
•Regularly check the condition of the tool and replace the damaged parts.
•Do not over tighten or use undue force as this can cause damage to both tool and component.
•The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to
the spindle bearing or other components bursting and fragments of components flying around
may lead to injuries.
•Always use workshop manual for detailed instructions.
•Always lubricate the screw threads before using the tool.
•Check & replace any damaged components as required.
•Keep children and unauthorized persons out of the working area.
•Keep this tool out of children reach.
APPLICATION

CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
www.cannontools.co.uk