Nerf Blaster Scooter User manual

Blaster Scooter Trouble
Shoong Guide:
Always refer to manual for proper use.
1. If blaster won’t re darts:
• First check that baeries are installed and are fresh.
• Check that darts are in the clips, and that both clips are inserted correctly .
Blaster will not operate if only one clip is inserted.
• Follow Dart image on clip to show dart direcon and that is the direcon they should be installed in
blaster. (always poinng forward).
• Check for dart jams by opening grey access door at top of blaster.
Remove any loose darts. Access door must be securely shut for blaster to
operate correctly.

Blaster Scooter Trouble
Shoong Guide:
2. Clip Issues
• Do not ll included clips beyond capacity (6 darts each clip). Over lling can
cause jams and can cause spring in the clip to get dislodged. To x spring in clip,
use a pen to push down on the spring and it should return to its correct tension.
• Do not force clips into blaster. They should slide easily into bay. Ensure arrow and darts are
properly aligned, always poinng forward. The clips should easily release by pressing the release
buons under the grey handgrips.
3. Darts
• Only use ocial Nerf standard darts. Do not used broken or distorted darts as
they are likely to jam.

Blaster Scooter Trouble
Shoong Guide:
4. Scooter
• Wobbly steering: Ensure scooter height adjustments lock is secure and stem is al-
so securely inserted to the boom base. The orange buon should be fully de-
pressed as shown.
• Bumpy ride: Check wheels for debris, clean around axle and hub.