NIVELCO NIVOFLIP MAK-100 Series User manual

BKI11ATEX0004X ▪ mak1100a0600h_02 ▪ 1/2
Thank you for choosing a NIVELCO instrument.
We are sure that you will be satisfie throughout its use!
1. GENERAL INDTRODUCTION, OPERATION
NIVOFLIP MAK-100-type magnetic level switches are suitable for level switching of variuos liquids.
MAK-100 type magnetic level switches are used for magnetic-lamella bypass level indicator (named
NIVOFLIP) as an optional level switch.
OPERATION PRINCIPLE:
Mounted on suitable connection flanges on the side of the tank the liquid level in the bypass tube and the
tank is equal. In the stainless steel bypass tube a magnetic float tracks the level of the liquid. In the float
a permanent magnet is incorporated, which operates the MAK-100 type adjustable positioned magnetic level
switch through the stainless steel side of the tube, and provides non-contact signal transfer to the
microswitch.
Electronic connection is performed with cable gland, wired with a maximal 2.5 mm2cross sectioned cable.
Installation of the level switch is made by 2 pieces of hose clamps. Position of the switch can be changed to
adjust the needed switching level. The level switches are available in normal and Ex versions.
2. TECHNICAL DATA
TYPE MAK-100-0 MAK-100-6
Medium temperature max. +130 °C
Ambient temperature -20°C…+80°C
See: Temperature data
for Ex versions table
Material of the switch-housing Paint coated aluminium cast
Switch 1 microswitch, with NO / NC contacts
Switch rating 250V AC12 2.5 A
220V DC13 0.3 A
Only Ex ia certified and approved contact
isolator should be used for supply!
Electrical connections cable gland: M20x1.5 terminal for max. 2.5 mm2wire cross section
Mechanical protection IP 65
Electrical protection Class I.
Ex marking – II 1G
Mass 1.5 kg
Manufacturer:
H-1043 Budapest, Dugonics u. 11.
Phone: [phone] Fax: [phone]
E-mail: [e-mail] www.nivelco.com
NIVELCO Process Control Co.
NIVOFLIP

BKI11ATEX0004X ▪ mak1100a0600h_02 ▪ 2/2
2.1 GENERAL DATA
Temperature classes
Class T6 T5 T4
Max. medium temperature +80°C +95°C +130°C
Ambient temperature -20°C…+60°C -20°C…+70°C -20°C…+80°C
2.2 ACCESSORIES
• Users manual
• Warranty card
• Declaration of Conformity
• 2 pcs. Hose clamps
2.3 ORDER CODE
NIVOFLIP MAK–100–
Ex marking Code
None 0
Ex II 1G 6
2.4 DIMENSIONS
3. WIRING
NC
NO NO
NC
GND
2.5 MOUNTING
Switching differential ±35 mm
1
0
4
3
2
7
5
6
Switching
level
4. CONDITIONS OF EX APPLICATIONS
The housing of the instrument should be grounded
by its grounding screw to the EP system.
Only Ex ia certified and approved contact isolator
should be used for supply!
5. MAINTENANCE
The instrument do not require maintenance, but
the instrument (depending on the application)
may need to be checked or cleaned regularly.
6. STORAGE
Ambient temperature: -25...max:+80°C,
see: ” Temperature data for Ex versions table”
Relative humidity: max. 98% non-condensing!
7. WARRANTY
NIVELCO provides warranty of 3 (three) years
in compliance with details described in the
Warranty Card.
mak1100a0600h_02
2015 October
NIVELCO reserves the right to change
technical data without notice!