Noble House Home Furnishings BAR TABLE User manual

A1
B1 1
B2 1
C1
D2
②15
Shelf Panel
Left Leg Panel
Right Leg Panel
Top Panel
Front Panel
Qty
Description
Flat Washer
No.
Qty
Description
Picture
No.
Picture
①15
Bolt (M6x25mm)
Noble House Home Furnishings LLC
Page 2 of 9
③1
Allen Wrench

OVERVIEW
This Bar Table has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Bar Table parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise youself with the parts and
steps before assembly.
Top Panel
RightLeg
Panel (B2)
Front
Panel (C)
Shelves
Panel (D)
Left Leg
Panel (B1)
Noble House Home Furnishings LLC
Page 4 of 9

Unpack and place all parts on a clean, non-marring surface.
Step 1
Step 2
3
Do not fully tighten Bolts.
Repeat the same process with the Right Leg Panel(B2).
Noble House Home Furnishings LLC
B2
B1
Page 5 of 9
Place the Top Panel(A) facedown onto a clean, non-marring surface.
Position Left Leg Panel(B1) onto the Top Panel (A) and attach using Bolts(①) and Washers(②)
with Allen Wrench(③).

Step 3
Step 3.2
Step 3.1
3
3
Do not fully tighten Bolts.
Repeat the same process with Right Leg Panel(B2) and Front Panel(C)
Noble House Home Furnishings LLC
B2
C
B1
Page 6 of 9
Place the Front Panel(C) into the Frame as pictured above.
3.1) Secure Front Panel(C) to Left Leg Panel(B1) using Bolt(①) and Washer(②) with Allen
Wrench(③)
3.2) Secure Left Leg Panel(B1) to Front Panel(C) using Bolt(①) and Washer(②) with Allen
Wrench(③)

Step 4
Step 4.1
Step 4.2
Step 4.3
Iron dowel
2
3
1
3
With the assistance of an adult helper, lay the frame down as shown.
Do not fully tigthen the Bolts.
Repeat the same process to the other Shelf Panel(D)
In a sequential manner, tighten all Bolts at all joints until fully locked into position
Noble House Home Furnishings LLC
Page 7 of 9
4.1) Position Shelf Panel(D) between the Legs so the prefixed iron dowels of Shelf Panel(D) are
in the housing on Front Panel(C)
4.2) Secure middle point of Shelf Panel(D) to Front Panel(C) by using Bolt(①) and Washer(②)
with Allen Wrench(③).
4.3) Secure Shelf Panel(D) to Left Leg Panel(B1) and Right Leg Panel(B2) by using Bolts(①)
and Washers(②) with Allen Wrench(③)

With the assistance of an adult helper, stand the Bar Table up.
Ensure all Bolts are fully locked into position.
Your Bar Table is ready for use.
This Bar Table can only be used on a flat, level surface.
Step 5
Noble House Home Furnishings LLC
Page 8 of 9

●
Children should not climb or jump on the furniture.
●
Do not write on furniture without a padded barrier to
protect the surface.
●
To obtain the longest lifespan of your outdoor products,
avoid extended and lengthy exposure to rain, snow,
and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
●
Not for commercial use. For residential use only.
●
Stains may be removed with mild soap solution and
damp cloth.
●
Do not clean furniture with harsh cleansers or polish.
●
To obtain the longest lifespan of your outdoor products,
minimizing exposure to direct sunlight is recommended.
●
Dust and pick-up spills using a clean, non-colored, lint-
free cloth.
Care & Maintenance
●
Do not put hot items directly on furniture surface.
●
Prolonged exposure to rain may cause rusting which can
stain floors.
Page 9of 9