NRS Healthcare N85146 User manual

1
USER INSTRUCTIONS
HOME HELPER TROLLEY - FLAT PACK
N85146 Home Helper Trolley - Flat Pack
General Safety Warning
Please make sure that you read and follow
these instructions carefully. Keep these
instructions in a safe place for future reference.
1. INTENDED USE
The Home Helper Trolley is designed to enable users to safely transfer items and meals around the home;
the lower tray is set forward on the frame to allow users to walk naturally when pushing.
2. SAFETY
WARNING this trolley is not designed to be sat upon.
WARNING although this item is used when walking,
IT SHOULD NOT BE USED AS A WALKING AID.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents:
1. Frame Side Right x 1
2. Frame Side Left x 1
3. Tray x 2
4. Cross Tube Rear x 2
5. Cross Tube Front x 2
6. E-Clip x 4
7. Castor Assembly x 4
4. ASSEMBLY/INSTALLATION
Note this product does not require tools for assembly
4.1 Fitting Cross Tubes:
There are four tubes, two rear tubes (B) and two
front tubes (A). The front tubes (with welded tabs)
must be tted in the correct orientation, with the tabs
facing forward and upwards
To engage in the frame, press in the spring button
and push in the tube until the spring button “clicks”
into position and the button is visible through the
hole in the frame.

2
4.2 Aligning the Side Frame:
Align the other frame side onto the four side tubes
and engage the spring buttons as described above,
ensure all spring buttons have clicked into place and
are visible through the holes in the frame.
4.3 Fitting Trays to Frame:
With the tray sideways enter the frame and rotate
into position. Engage the clips on the front of the tray
onto the cross tube tabs, and then clip the rear edge
of the tray onto the rear tube.
Note: Fit the lower tray rst, repeat for upper tray.
4.4 Fitting Castors:
Fit the castors to the frame by pushing them into the
bottom of the frame, align the holes in the frame with
the holes in the castor leg and secure with e-clip.
Turn product upright and check it is level and stable.
Note: Ensure castors are set to the same height.
5. MAINTENANCE
Inspect the product regularly for signs of wear or
damage, particularly the condition of the castors
Check all xing clips are inserted correctly and there
is no excessive movement.
If you see or suspect a fault do not use – contact
your dealer immediately.
6. CLEANING INSTRUCTIONS.
Clean regularly, use a general purpose, neutral
detergent and warm water
Do not use abrasive cleaners or cloths as this will
damage the surfaces of the product.
Allow to dry thoroughly
The trays are designed to clip on/o󰀨 for cleaning. To
remove, unclip the rear edge and lift clear. To ret,
engage the clips on the front of the tray on the front
cross tube and secure by clipping the rear edge of
the tray onto the rear cross tube.
Check tray is level and secure before use.
7. PRODUCT DISPOSAL
This product must be thoroughly cleaned/sterilised
prior to disposal.
This product is manufactured from metal and plastic
and can be disposed of through Local Authority
Household Waste and Recycling Centres or through
Local Trade Waste Collectors.and Recycling
Centres.
8. PRODUCT GUARANTEE
NRS Healthcare guarantee this product for a period
of 12 months, from the date of purchase, against
faulty materials and workmanship.
This guarantee does not cover; abuse, misuse,
interference or tampering with any part of the
product.
Any guarantee issued by NRS Healthcare does not
a󰀨ect your statutory rights.
N85146-UI-2 21-05-2021
NRS HEALTHCARE Sherwood House, Cartwright Way, Forest Business Park
Bardon Hill, Coalville, Leicestershire, LE67 1UB, UK.
Tel: Customer Services: 0345 121 8111 Email: [email protected]
NRS Healthcare is a leading supplier of community equipment and daily living aids.
Please visit one of our websites to view our full range of products:
www.healthcarepro.co.uk or www.completecareshop.co.uk