Nuna mixx User manual

instruction manual

Thanks for
choosing Nuna!
…and the MIXX™—our customizable, convertible
cruiser with a crazy-flat fold.
Visit us at nuna.eu to learn more about our
family of products, view interactive product
demos and see where our products can be
purchased online or at fine baby shops.

1
Usage
1
Illustrations
5
2
6
3
1
2
1
2
1
1
1
4

710
2
1
2
8
9
11
1
12
2
1
1

3
15 18
16
14 17
13
1
Illustrations

4
21
22
23
1
2
24
1
1
2
20
19

5
27
25
2 9
1
1
2
28
30
11
26
1
1
2

31
6
32
1
2
33 36
34
35

7
nuna.eu
38
1
2
37
1
2
39

8
EN
Contents
Illustrations 1-7
English (EN) 8
Safety and recommendations 9
Warnings 10
Parts list 12
Contents of the box 13
How to set up the Nuna MIXX 13
How to use the Nuna MIXX 15
Accessories 17
Cleaning and maintenance 19
Warranty and service 19
Where to find Nuna products 20
Français (FR) 21-34
Español (ES) 35-48

9
EN
Safety and
recommendations
Please take note of the following before using the Nuna MIXX.
Safety is very important to us and you can be assured that our products comply
with the relevant standards and that they have been tested by a number of
independent testing panels and laboratories.
The Nuna MIXX is a patented product and complies with US safety standards and
ASTM F833.
If you have any questions or comments regarding the Nuna MIXX, we will be glad to
hear them through our web site nuna.eu
IMPORTANT! KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE!
Read these instructions carefully before use and keep them for future
reference. Your child’s safety may be aected if you do not follow these
instructions.
This stroller is intended for children from birth and up to 50 lbs (22.7kg)
maximum.

10
EN
WARNINGS
Failure to follow these warnings and instructions could result
in serious injury or death.
NEVER leave child unattended. Always keep your child in view
while in MIXX.
Avoid serious injury from falling or sliding out. Always use
seat belt. After fastening buckles, adjust belts to get a snug t
around your child.
Please save instruction manual for future use.
Avoid nger entrapment: Use care when folding and
unfolding the MIXX. Be certain the MIXX is fully erected and
latched before allowing your child near the MIXX.
NEVER use MIXX on stairs or escalators. You may suddenly
lose control of the MIXX or your child may fall out. Also, use
extra care when going up or down a step or curb.
Strangulation Hazard: Do not place items with a string
around your child’s neck, suspend strings from this product,
or attach strings to toys.
MIXX is to be used only at walking speed. Product is not
intended for use while jogging, skating, etc.
Use of the MIXX with a child weighing more than 50 lbs (22.7
kg) or 45 in (114.3 cm) will cause excessive wear, stress on the
MIXX, and create an unstable condition, use the Mixx only
one child at a time.
Adding accessories such as purses, shopping bags, or parcels
to the handle or canopy can cause the MIXX to be unstable.
Only use Nuna accessories with your MIXX.

11
EN
DO NOT use storage basket as a child carrier.
Never allow your MIXX to be used as a toy.
Discontinue using your MIXX should it become damaged or
broken.
Overloading, incorrect folding, and the use of accessories e.g.
child seats, bag hooks, rain covers, buggy boards, etc… other
than those approved by Nuna may damage or make this MIXX
stroller unsafe.
Never allow children to stand on the footrest.
This stroller has been designed to use from birth. We
recommend using lowest reclined position for newborn
babies.
This stroller does not replace a cot or a bed. Should your
child need to sleep, they should be placed in cot or bed.
The parking device should be engaged when the stroller is
stopped and when placing and removing child.
Do not place any item on the canopy.
To avoid any danger of suocation, remove all plastic covers
before using this item and destroy or keep away from babies
and children!
Always check that the seat unit, the bassinet, and car seat
attachment devices are correctly engaged before use.
To avoid injury ensure that your child is kept away when
unfolding and folding this product.
Child may slip into leg openings and strangle. Never use in
reclined carriage position unless the calf support is raised to
cover the front opening.
To prevent a hazardous, unstable condition, do not place
more than 10 lbs (4.5 kg) in the storage basket.

12
EN
Parts list
Make sure all parts are available before assembly. If any part is missing, please
contact local retailer. No tools are required for assembly.
1 Front Wheel (x2)
2 Rear Wheel (x2)
3 Armbar
4 Rain cover
5 Adapter
6 Canopy Visor
7 Brake Assembly
8 Stroller
9 Canopy
10 Seat Pad
11 Armbar
12 Calf Support
13 Front Wheel
14 Rear Wheel
15 Buckle
16 Shoulder
Harness Pads
17 Handle
Adjustment
Button
18 Handle
19 Recline Handle
20 Folding Button
21 Storage Basket
22 Brake Lever
x 2 x 2
2 4 5
13
8
10
9
11
12
13
14
16
15
17
22
20
19
21
18
7
6

13
EN
Contents of the Box
Stroller Frame
Front Wheel
Rear Wheel
Armbar
Rain cover
Adapter
Canopy Visor
Brake Assembly
Tools Needed: None
How to set up the
Nuna MIXX
Opening the Nuna MIXX
Check that you have all the parts for this product before using it. The assembly
should be performed only by adults.
1 Separate storage latch from storage mount (1), and then lift the handle
upwards (2), a click sound means the stroller is open completely. Rotate the
backrest to vertical position .
2 Check that the stroller is completely latched open before continuing.
Assemble Canopy
1 Align the canopy visor zipper with the zipper on the inside ofthe front canopy
edge. (3)
2 Completely zip the canopy visor onto the canopy. (3)
3 Insert the clips of canopy to the mount on the tubes. (4)

14
EN
Assemble Front Wheels
1 Assemble front wheels to front legs. (5)
Check that wheels are securely attached by pulling down.
2 To disassemble front wheel, detach front wheel from front leg (6)-2 while
pressing the release button. (6)-1
Assemble Rear Wheels
1 Assemble brake assembly to rear legs (7), assemble rear wheels to brake
assembly (8). Wrap the connecting tube of rear legs with the ap of the
storage basket, and then snap the three snap buttons (9).
Check that wheels are securely attached by pulling on wheel
assemblies.
2 To disassemble rear wheel, detach rear wheel from rear wheel mount (10)-2
while pressing the release button. (10)-1
Assemble Armbar
1 Align the armbar ends with the armbar mounts, and then insert to lock. (11)
2 To disassemble armbar, press armbar release button (12)-1, and then pull out
the armbar. (12)-2
3 Attach the buttons on the both sides of the soft goods and the seat. (13)-1
The completely assembled stroller is shown as (13).

15
EN
How to use the
Nuna MIXX
Securing child
1 To release the buckle latch, push on center button and remove the clips. (14)
2 To secure child, assemble buckle. (15, 16, 17)
3 Fit harness snugly to child by sliding each adjustment buckle. (18)
Adjusting the shoulder harness position
To adjust the position of the shoulder harness anchor, open the zipper of seat
back, turn the anchor to be level with the side facing forward. Thread it through
the shoulder harness slot from back to front (19). Rethread it through the slot
that is closest to child’s shoulder height (20).
To avoid serious injury from falling or sliding out, always secure your child with
harness.
Make sure your child is snugly secured. The space between the child and the
shoulder harness should be about the thickness of one hand.
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Canopy
To open the canopy, pull canopy toward front. To fold the canopy, pull canopy
toward back. (21)
It is convenient to see the baby when open the canopy window. (22)
We do not recommend that you remove the canopy. If you have any need to
remove the canopy please contact nuna.

16
EN
Adjust Recline
1 There are 5 positions for the backrest.
2 To recline the backrest, squeeze the adjustment button, (23)-1 and pull then
adjust the backrest to a desired angle. (23)-2
3 To raise the backrest, push up.
Make sure the recline is set properly for use.
Adjust Calf Support
1 The calf support has 3 positions.
2 To raise the calf support, push it upwards.
3 To lower the calf support, press in both buttons (24)-1 on the sides and
rotate the calf support downward. (24)-2
4 When the seat is fully reclined at adjust the calf support to vertical, pull out the
containment aps and attach them to the side of the seat base using the snaps
located on the containment aps. (25)
Do not use enclosure with an older child that can push up on hands
and knees or crawl out.
WARNING Child may slip into leg openings and strangle. Never use in
redlined carriage position unless the calf support is raised to cover the front
opening.
Please remove the armbar and take good care of it when the calf support is
in a vertical position on the seat to avoid accidents.
Front Swivel Locks
1 Press the both sides of swivel lock then pull it rearwards to orientate the front
wheel. (26)
2 It is recommended to use swivel locks on uneven surfaces.

17
EN
Brake
1 To lock wheels, step on brake lever and push downwards. (27)
2 To release wheels, step the brake lever forwards. (28)
3 Always apply brake when stroller is in stopped position.
Adjust Handle
1 The handle has 3 positions.
2 To adjust the height of the handle, pull the handle upward or downward
(29)-2 while pulling up on the handle adjustment button. (29)-1
Switch Seat
The seat can be switched to face front or to face the parent.
1 Squeeze the seat release buttons (30)-1 while lifting the seat. (30) Turn
the seat to reverse direction, and then insert the seat to seat mounts. (31)
Fold Stroller
Please fold the canopy before folding the stroller.
1 Lift up on the folding buttons (32)-1 and push the stroller forward to fold
(32)-2.
2 The storage latch will automatically hook onto the storage mount, then the
stroller is folded and locked completely. (33)
Accessories
Use with Nuna PIPA Infant Car Seat

18
EN
When using with the Nuna PIPA infant car seat, please refer to the following
instructions.
1 To attach adapters, place adapters onto mounts as shown. A“click”sound means
the adapter is locked. (34)
2 To attach car seat, place car seat onto adapter as shown. (35), A“click” sound
means the car seat is locked. (36)
3 To remove car seat, lift the car seat upwards (37)-2 while pressing the stroller
release buttons. (37)-1
4. To remove adapters, lift the adapters upwards while pulling the release buttons.
(38)
If you have any problems using the car seat, please refer to the car
seat instruction manual.
Remove car seat before folding.
Use Rain Cover
To assemble the stroller rain cover, place it over the stroller seat. (39)
Always check ventilation, especially in hot weather when the rain cover is on the
product.
Always check that the rain cover has been cleaned and dried before folding.
Do not fold the stroller after assembling the rain cover.
Do not place your child into the stroller assembled with rain cover during hot
weather.