OBERON 39-1008-SPKRMNT User manual

MODEL 39-1008-SPKRMNT
Installation Instructions
**** WARNING ****
Please thoroughly read the product warning
below before installation to provide for a safe
work environment.
1. Always consider the hazard to other people:
a. During installation, use warning signs, etc.
b. Don’t work with people directly below the work area as equipment
could fall and cause an injury
2. Be sure to securely fasten the enclosure to the wall or ceiling to prevent
the enclosure from becoming dislodged.

Installation Instructions
Model 39-1008-SPKRMNT
[phone] www.oberonwireless.com
Part Number 2316 01/13/2017 Oberon, Inc. 1315 South Allen Street State College, PA 16801 Copyright 2014
Figure 2 - Attach to Speaker Stand
Assembly Components:
- Speaker Mount Bracket – 1 each
- Clamping U-Bolt – 1 each
- #1/4-20 x 3/8 Screws – 2 each
If any of these items are missing, contact your Oberon representative.
Step 1 – Attach speaker mount bracket to the Model 1008/1009 using the #1/4-20 screws (Figure 1).
Step 2 – Align the U-bolt to the two holes in the speaker mount and clamp on to the speaker stand (Figure 2).
Step 3 – The installation is now
complete (Figure 3).
Figure 1 - Speaker Mount Bracket Install
Figure 3 - Completed Installation