Olympus ORBEYE Manual

ORBEYE System Set-up
Press Tower Power Button On
Step 1
Step 4
Step 7
Step 2
Step 5
Step 8
Step 3
Step 6
Step 9
Place White Paper/Gauze Under
Head
Press Load User Preset
System Boots Up
Press and Hold White Balance for
2 Seconds
Select Case Type
Main Menu Screen Comes On
Beeps and Says Completed
Home Screen Appears

Monitor Set-Up
Turn On Monitor
Step 1
Step 4
Step 7
Step 2
Step 5
Step 8
Step 3
Step 6
Step 9
Use 2 Arrows to Select Flip
Rotation is On When (R) is
Upside Down
Press Control to Access Menu
Use Flip (OFF) for Main ORBEYE
Monitor
Connect Each Monitor Cable
White Dot Up
Press Custom 1
Use Flip (Rotation) for Assistant
Monitor
Set Up Room by Case Needs
Refer to Room Setup Guide

Head Controls
Trigger Brake Release Pull To
Move Release to Lock
Step 1
Step 4
Buttons 1, 2 and 3 can be programmed with different functions and saved by user profile.
Step 2
Step 5
Step 3
Step 6
Button (1)
Brightness Up (+)
A – Up and Down Movement
Focuses ORBEYE
Button (2)
Brightness Down (-)
B – Up and Down Movement
Zooms ORBEYE
Depth of Field
(1 -5) Cycles Through
A–Focus B–Zoom

This sheet does not replace the IFU. Please refer to IFU for proper care and use
Olympus is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates. I Medical devices listed may not be available for sale in all countries.
136 Turnpike Road, Southborough, MA 01772
For more information, contact your Olympus
sales representative, or call 800-773-4301.
www.medical.olympusamerica.com
©2019 Olympus America Inc. All rights reserved.
Printed in USA OAIENT0719QRG31511
Notes