Orbit OBB025M User manual

OBB025M
POWER RACK
OWNER'S MANUAL OBB025 POWER RACK
CAUTION: Exercise of a strenuous nature,as is customarily done on this equipment,
should not be undertaken without firstconsulting a physician. No specific health claims are
made or implied as they relate to the equipment. Measurements made by the equipment are
believed to be accurate, but only the measurements of your physician should be relied upon.
IMPORTANT: Read all instructions carefully before using thisproduct. Retain this product.
Owner's manual for future reference.
TOOLSREQUIRED
FORASSEMBLY
Adjustable Wrench
Pliers
Hammer
Warranty
Assembly
Parts
OBB025M
POWER RACK

POWER RACK
TABLE OF CONTENT
Table of Content 1
Introduction 2
Safety Instructions 3
Hardware List 4
Parts Draw 5
Assembly Instructions 6-10
Stretching Exercises 11-12
Exploded Parts List 13
1

2
POWER RACK
INTRODUCTION
Thank you for selecting this Fitness product.
Orbit Fitness is proud of its tradition of providing
fitness equipment that meets the highest standards of quality.
We hope you will enjoy many years of health and fitness
from this product.
If you are not satisfied with your Orbit Fitness product for any reason,
Do Not Go Back To The store From Which It Was Purchased.
Instead, please allow our Customer Service Department to help you.
Contact the Orbit Fitness Customer Service Department at:
E-mail address: [e-mail] or phone [phone]
Orbit Fitness will gladly answer your questions, guide you through the
assembly steps,and quickly dispatch any replacement parts directly to your
home! We are ready to make your new Orbit Finess product the most used piece
of fitness equipment you own.
For information about other Orbit Fitness products,
contact us at:
Orbit Health & Fitness Solutions
28 Fellowship Road
Gnangara, Western Australia 6077

POWER RACK
INTRODUCTION
Safety Instructions:
Failure to follow the instructions and warnings below could result in serious
injury or death:
Before beginning any exercise program, consult with your doctor or health
physician.
This machine is for home use only. The warranty does not cover this machine if
it is used commercially
Refer to the manual whenever you have a question.
Inspect the machine before each use.
Keep your fingers, body parts, children and pets away from moving parts.
Warm up before each workout and cool down after each workout.
Rest adequately between repetitions.
Always wear comfortable, loose-fitting clothing.
Use a companion as a safety spotter.
IMPORTANT: THE MAXIMUM RECOMMENDED WEIGHT CAPACITY
FOR YOUR POWER RACK IS 300 KGS.
3

POWER RACK
Before Asssembly:
Tools Required:
Before assembling your Power Rack,please take the time to make sure your assembly kit hasAll
of the parts listed on the Machine Parts List. Each part has been illustrated for proper location
and numbered for east identification.
Compare your contents against the parts list. If any parts are missing or unusable, please
Our Dedicated Customer
ServiceStaff is standing by to help you at: 8:00 a.m. Through 5:00 p.m. Any parts you needWill
be happily mailed to you at your home.
For assembly, your Power Rack will require two adjustable wrenches.
Do
Not
Return The product To The Store From Which It Was Purchased.
HARDWARE
(23) M12X90 HEX BOLT 23 PCS
(22) M12 WASHER 64 PCS (21) M12 LOCKNUT 32PCS
(25) M12X180 HEX BOLT 1PC
(24) M12X80 HEX BOLT 8 PCS
4
Please do not tighten nuts and bolts until you have installed all hardware
in their proper places.

POWER RACK
PARTS LIST
5
(1) Upright
(2) Left Base Frame (3) Right Base Frame (4) Top Beam
(7) Top Crossing Bar (8)(5) Top Crossing Frame
(9)
(6) Below Crossing Bar
(10)
Left Bar Holder
Right Bar Holder (11) (12) RP Plate Rod
OP Plate Rod
(13)
Right Crutch Bar
(17)Connection Plate A (18)Dip Bar (19)Pin M16*110 (20)Pin M8*35
(26) U Rack (27) Bar Pipe
(14) Left Safety Bar
Left Crutch Bar
(15) Right Safety Bar (16) Support Plate

POWER RACK
ASSEMBLY INSTRUCTIONS
STEP 1
6
21
1
3
1
2
6
16
16
23
22
22
22
22
23
21

POWER RACK
ASSEMBLY INSTRUCTIONS
STEP 2
7
22
4
21
21
24
24
22
22
22
22

POWER RACK
ASSEMBLY INSTRUCTIONS
STEP 3
8
17
17
7
5
22
22
23
23 21
21
21
21
22
22
22
22
22
22
22
22
23
23
23
22

POWER RACK
ASSEMBLY INSTRUCTIONS
STEP 4
9
15
14
10
8
11
9