Organized Living freedomRail 2 Drawer Big OBox User manual

a
freedomRail Assembly Instructions
2 Drawer Big OBox
1
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Step 3: Attach Sides
Step 1: Attach Hanging Brackets
Contents of Package
Step 2: Install Connector Bolts
Step 4: Attach Top
Attach Hanging Brackets to Sides using Euroscrews. (If using Power Drill, set torque to low setting.) Install (4) Connector Bolts into small holes on Top and Bottom Panels.
Over
Top
Bottom
Euroscrews
1 /"
Wood
Screws
(2) Larger
Drawer
Left Sides
(2) Larger
Drawer
Right Sides (2) Handles
(4) Machine Screws
(for Handles)
Top and Bottom
Right Side
Back EdgeBack Edge
Left Side
Smaller Holes for
Connector Bolts
(2) Large Drawer Backs
(2) Drawer Bottoms
(2) Larger Drawer Fronts
Connector
Bolts
Hanging
Brackets
(12)
(4)
(4)
(36)
Top
Cam
Lock
Open
a
b
a
a
b
Assembling the 2 Drawer Big OBox
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
(4) Full Extension Drawer Glides
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Left Side
Right Side

©2015 Organized Living
Bloomington, IN 47403
June 2015
880151
(a) Lock Cam by turning clockwise / turn Turn until snug
(b) Attach Inner Glide to Drawer with Euroscrews. Notched End should be at back.
(c) Attach Handle with Machine Screws.
Notched
End
(a) Position Drawer on Glides and push in Drawer completely. Repeat Steps 8, 9, 10, and 11 for the
other drawer.
NOTE: To remove Drawers, push the Black Tab while pulling out the Drawer.
Screw in Connector Bolts and attach Front.
(a) Attach Sides to Back. (b) Secure with 1 /" Wood Screws. (c) Slide in Bottom.
Turn Big OBox on its side. Attach Outer Glides with (4) Euroscrews in
holes 2 and 3. Repeat for other side.
Mount Big OBox onto Uprights by inserting Brackets into the innermost track of each Upright. Two people
recommended for installation.
(b) Seperate Inner Glide from Outer Glide by pushing the Black Tab while pulling Glide sections apart.
(a) Pull out Inner Glide to expose Black Tab.
freedomRail Assembly Instructions
2 Drawer Big OBox
2
OrganizedLiving.com
1-800-669-3225
Assembling/Inserting Drawers
Installing Glides
Step 5: Seperate Glides
Step 6: Attach Outer Glides to Big OBox
Step 10: Attach Drawer Glides & Handle Step 11: Insert Drawers
Big OBox Front
Attached to Big OBox
Attaches to Drawer
Outer Glide Black Tab Inner Glide
Bumper
2
13
Bumper
b
c
a
a
c
ba
Step 8: Attach Drawer Panels and Drawer Bottom Step 9: Attach Front Panel Connectors
Step 7: Mount Big OBox on Uprights