Organized Living freedomRail User manual

Connect with us.
freedomRail®
GRID AND ACTIVITY ORGANIZER STORAGE SYSTEM
Grids and Activity Organizers oer the exibility to change accessories any time you want to — without any tools.
ITEMS INCLUDED IN KIT
PARTS LIST
INSTALLATION GUIDE
Garden Rack & Basket
(2) Work Hooks Basket
Wall Grid
Contact Us.
©2019 OrganizedLiving | Cincinnati, OH 45241
Phone: [phone] am-5 pm EST Mon-Fri.
Email: [email protected]
organizedliving.com/installation
7903-5200-50 | 7904-5200-50 | 7905-5200-50
GARDEN KIT

INSTALLATION GUIDELINES
Choose the best installation for your needs.
The 2’ x 4’ Wall Grid mounts vertically or horizontally along the wall at any height.
Once the Grid is secure, the individual organizers simply lock into place on the Grid without any additional hardware or tools.
Activity Organizers can also mount directly to the wall using the included hardware.
2. Whether the Grid will hang vertically or horizontally, the Grid’s
horizontal wires should be facing out, away from the wall.
Horizontal wires face out away from wall.
Stud Screw Method:
Use when Clip installs into Stud
Drive Screw through Clip to
secure Grid to wall. If necessary,
pre-drill hole in wall at stud
with a ⁄” drill bit.
Anchor and Anchor Screw
Method: Use when Clip position
doesn’t align with a Stud
Drill hole in wall using a ⁄” drill
bit. Insert Anchor into hole.
Drive Screw through Clip
into Anchor.
Anchor
Screw
Screw
It’s recommended to mount the Grid on the wall with 2 or more
Mounting Clips installed into studs. If you can only position the Grid
with Mounting Clips installing into 1 stud, use the Stud Screw Method
to secure the Clip then use the Anchor method for the remaining Clips.
All 6 Mounting Clips should be used to secure the Grid safely and
securely to the wall.
5. Install Mounting Clips to wall.
Power Drill Tape Measure
Level
Phillips Driver
/" Bit
/" Bit
TOOLS YOU MAY NEED
Pencil
Stud Finder
1. Using level and pencil, draw a level line at the preferred height
for top of Grid. With stud nder and pencil, mark center of each
stud along that level line.
GRID INSTALLATION
4. Place Grid against the wall. Mounting Clips should be evenly
spaced on Grid and positioned on as many stud marks as pos-
sible — minimum of 2 studs. If only one stud is available,
position the center of the Grid at the stud.
Mounting Clips align with at least 2 studs.
3. Attach the Mounting Clips on Grid by opening and pinching
the Clip onto the grid wire.
BRACKETS INSTALLATION TO GRID
Align top of Bracket with horizontal Grid wire. Pull Bracket down
and snap in place on bottom Grid wire.