(2) Inspection setting
This is a detailed setting menu related to face recognition and body temperature
measurement.
No. Name Description
1Body temperature
test Turns the body temperature test function on or off.
2Temperature
compensation
It is used to calibrate the temperature when measured different from
the actual body temperature by the external temperature.
3 Scene selection It is used to define device installation location.
Recommend to use & setting at indoor.
4 Alarm threshold
If the measured body temperature is higher than the entered value,
an alarm message is displayed.
When the body temperature alarm is on, a beep sounds.
5Body temperature
alarm Enable or disable the Alarm.
6 Temperature display Change the temperature display format to Celsius (℃) or Fahrenheit
(℉).
7 Fan It set the operation of the fan for heat dissipation.
8 Mask detection
Measure your body temperature and check whether wear a mask or
not. When a person without a mask is detected, display a no-access
sign and you can hear the voice.
9 Stranger mode
When it detects a person who is not registered in the database, it
notifies them that it is a stranger.
Off is use Stranger mode. On is No Stranger mode
10 Stranger record When a stranger is detected, the captured picture is saved separately.
1
2
3
6
4
5
7
8
9
8
1
0
Copyright © 2020 ORION Images Corporation.
All Rights Reserved
WWW.ORIONIMAGES.COM
