OSEE BCM-230 Series User manual

BCM-230 Series
LCD Monitor
USER MANUAL
OSEE AMERICAS, LTD
43218 CHRISTY STREET
FREMONT, CA. 945638
Toll Free 866-625-6106
Tel. [phone]
Fax [phone]
!BCM-230-3HSV
!BCM-230-HSV
!BCM-230-SV

PRODUCT INFORMATION
MODEL: BCM-230 Series LCD Monitor
Version: V010000
Modified: September 5th, 2013
COMPANY NAME
Beijing Osee Digital Technology Ltd.
CONTACT US
Address: No.22 Building, No.68 zone, Beiqing Road, Haidian District, Beijing, China
Post code: 100094
Tel: 8610 - 62434168
Fax: 8610 - 62434169
Http://www.osee-dig.com
E-mail:[e-mail]

About The USER MANUAL
The user manual applies to the following device types:
!BCM-230-3HSV
!BCM-230-HSV
!BCM-230-SV
The images of BCM-230-HSV monitor are adopted in the following descriptions. Any of the
different specifications between the device types are elaborated. Before reading the manual,
please confirm the device type.
Note: The specs are subject to change without prior notice!

Content
Chapter 1 Overview ...................................................................................... 1!
Introduction ............................................................................................................................... 1!
Feature....................................................................................................................................... 2!
Chapter 2 Safety Precaution for Use............................................................... 3!
Chapter 3 Product Introduction....................................................................... 5!
Unpackaging and installation.................................................................................................... 5!
Description of product structure ............................................................................................... 6!
Chapter 4 Usage........................................................................................... 9!
4.1 Description for Display status................................................................................................... 9!
4.2 Supported Signal Format....................................................................................................... 10!
4.3 Interface of rear panel ........................................................................................................... 11!
4.4 Interface of front panel .......................................................................................................... 12!
Chapter 5 Menu Description......................................................................... 13!
5.1 Main menu ........................................................................................................................... 13!
5.2 Status Display ...................................................................................................................... 20!
5.3 Function Display ................................................................................................................... 20!
5.4 Adjustment Menu.................................................................................................................. 21!
5.5 Source menu........................................................................................................................ 21!
5.6 PBP/PIP Input ...................................................................................................................... 22!
Chapter 6 Specification ............................................................................... 24!
6.1 Description for Specification................................................................................................... 24!
6.2 Input signal format ................................................................................................................ 24!
6.3 Specifications ....................................................................................................................... 24!
6.4 Input/Output Resolution, Frame Refresh Rate and Color Matrix: ............................................... 25!

BCM-230 Series LCD Monitor User Manual
1
BCM-230 Series LCD Monitor
Chapter 1 Overview
Introduction
The BCM-230 Series LCD Monitor is a high performance broadcast monitor tailoring most applications
from program production, intensive upload/download, playout to studio and intensive monitoring all sorts
of business in TV Stations.
The front frame of the unit comes in a slim bezel design made from rubber mold. The professional TFT
glass at full resolution of 1920 x 1080 with LED backlight makes the BCM-230 Series LCD Monitor
capable of reproducing a natural color at quickest response time. In addition, the unit boasts a full wide
viewing angle as well as excellent brightness and contrast ratio.
By adopting the advanced 6-bit digital signal processing technology plus 3D comb filter, de-interlacing
capability and accurate scaling ensures the BCM-230 Series LCD Monitor to achieve a better effect of
smoother and more natural image.
The BCM-230 Series LCD Monitor supports up to 2Ch 3G/HD/SD-SDI/analog input, 1Ch S-Video and
ICh YPbPr input, and 1Ch HDMI/DVI-D input. Featuring PBP/PIP and showing two signals
simultaneously on the same screen makes the BCM-230 with added value.
TheBCM-230 Series LCD Monitor delivers much capable display functionality like waveform/vector
scope, audio de-embedding, audio monitoring, audio metering bar, TC, CC, AFD, UMD and all kinds of
markers.
The BCM-230 Series LCD Monitor also offers signal monitoring function, a real time monitoring for video
loss, freeze frame, audio loss, audio overloaded and audio over low.

BCM-230 Series LCD Monitor User Manual
2
Feature
"Prevailing slim bezel design
"Having multi format input including 3G-SDI
"Adopting full HD, wide viewing angle TFT glass
"Using 8-bit signal processing technology plus advanced conversion technology between the
interlacing and the progressive
"Featuring PBP and PIP, dual 3G-SDI capable under PBP mode
"Supporting waveform/vector scope, audio metering bar, TC, IMD and CC
"Supporting varied color temperature, varied scan modes, flexibility in marker setting, Blue
Only/Monochrome mode
"Signal monitoring, types of alarm include video/audio loss, EDH, freeze frame, black field
and audio lever over high/over low

BCM-230 Series LCD Monitor User Manual
3
Chapter 2 Safety Precaution for Use
Read and keep these instructions. Heed all warnings. Follow all instructions.
About the Position
1. Do not block any ventilation openings.
2. Do not use this unit near water.
3. Do not expose the unit to rain or moisture.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that product heat.
5. A nameplate indicating operating voltage, etc., is located on the rear panel. Install only in
accordance with the instructions in the section entitled, “Unpacking and Installation” on page
3.
6. The socket-outlet shall be installed near the equipment and shall be easily accessible.
About the Power-supply Cord
7. Do not defeat the safety purpose of the polarized or grounding-type plug.
8. Do not damage the power cord, place the heavy objects on the power cord, stretch the power
cord, or bend the power cord.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the unit.
10. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit
with a damaged power cord. It may cause fire or electric shock.
11. Unplug this apparatus during lighting storms or when unused for long periods of time.
12. Disconnect the power cord from the AC outlet by grasping the plug, not by pulling the cord.
13. Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by
qualified personnel before operating it any further.

BCM-230 Series LCD Monitor User Manual
4
Monitor
14. Do not beat with a hard object or scratch the LCD display.
15. Do not make the freeze picture displaying on the screen time too long, otherwise, it will leave
the afterimage on the screen.
16. Install in accordance with the manufacturer’s instructions
17. If the brightness is adjusted to the minimum, then it might be hard to see the display screen.
18. Refer all servicing to qualified service personnel. Servicing will be required under all of the
following conditions:
#The unit has been exposed to rain or moisture.
#Liquid had been spilled or objects have fallen onto the unit.
#The unit has been damaged in any way, such as when the power-supply cord or plug is
damaged.
#The unit does not operate normally.
19. Clean only with dry cloth.
20. Specifications are subject to change without notice.

BCM-230 Series LCD Monitor User Manual
5
Chapter 3 Product Introduction
Unpackaging and installation
Opening the box, please check whether the device has been damaged during transport. Check all the
things listed on the packing list are received. If there is any missing, contact your distributors or Beijing
Osee Digital Technology Ltd. for it.
We recommend that you should save the packing materials for future needs.
1. Install the pedestal following the iinstallation instructions.
Note: The pedestal and the monitor are packaged separately.
2. Put the monitor on the position you need for installing, and connect the power. Please make sure the
place you put is safety.
3. Connect a standard signal lines to the corresponding input port. All BNC connector impedance must
be 75Ω.
Note: Please use the power adapter supplied to avoid unnecessary trouble.
4. Use the power adapter and cord to connect single-phase three-wire AC power or following the local
power supply conditions. Make sure the power cord grounding well.
5. Finally, turn on the power switch, so that the device will be ready for work.

BCM-230 Series LCD Monitor User Manual
6
Packing List:
NO.
Detail list
Quantity
1
Monitor
1
2
Pedestal with screws
1
3
Accessory
warranty card
1
the base installation
instruction
1
User manual
1
4
The electric accessory
12V adapter
1
Power cord with fastening
1
Note: The packing list would be different according to the device type. Please confirm the device type.
And the BCM-230 Series Monitor supports two modes of riding position. The monitor is equipped with
the optional accessories for being assembled onto the racks.
Description of product structure
Front panel (Unit: mm) (As the following figure)
Note: As the figture shown, the monitor installed the pedestal and the optional accessories.