Otto Bock Paexo Shoulder User manual

Paexo Shoulder
Quick Guide
Ottobock wishes you lots of success
with your Paexo Shoulder assistive system!
Visit: www.paexo.com/paexo-shoulder

Before use
Optional: Add arm cuff comfort pads
Rotate the rotation stop to
the position in the picture
Green dot = right arm cuff
Yellow dot = left arm cuff
Lift arm pad on the inner
side of arm cuff and place
comfort pad underneath on
hook & loop area
Foldable flap is showing
towards elbow
1
3
2

Application – Putting on Paexo Shoulder
2 Close the lap belt and the
chest strap
1 Apply the product like a
backpack
5 Pull down arm cuff and
place arm into cuff
3 Tighten lap belt by pulling
both ends forward
6 Engage the magnetic
closure in the hook
closure
4 Unhook the magnetic
closure slowly and
cautiously
For video:
www.paexo.com/setup
7 Loosen the shoulder
harness until it lies loosely

Adjustments – Finding the right fit
1 Position Hip Belt
a: On hip bone
b: Center belt clip
2 Adjust Height
Align with shoulder level
3 Adjust Shoulder Straps
Stay loose – DO NOT tighten!
4 Slide Ball Sockets
Aligned with hip width
5 Position Back Plate &
Regulate Elastic Straps
Central between shoulder
blades
6 Level Support Force / Adjust-
ment wheel
Relative to arm weight
Rule: NO resistance to lower
your arms
For videos:
www.paexo.com/right-fit
1a
1b
2
4
5
6
 
+ –
3

Your Paexo Shoulder – Note your personal adjustments
setting support1setting support1
xx oo
Threaded bar length:3
position ball holder2
1 mark position
2 visible holes from the middle
3 use ruler
X
Name:
cm/in
X
to the left to the right

© Ottobock · 647S296-01-2001 · Technical changes reserved.
Reach us here
Ottobock SE & Co. KGaA
Max-Näder-Str. 15 · 37115 Duderstadt
Ottobock Industrials
[email protected]
T [phone]
Follow us on
 facebook.com/paexo
 twitter.com/Ottobock_Paexo
 linkedin.com/showcase/ottobock-industrials www.paexo.com