Panasonic AK-HRP1010G User manual

DVQP2910ZAW1122AM0 -PS
ENGLISH
For details of operating Remote Operation Panel AK-HRP1010G, please visit
the Panasonic website (https://pro-av.panasonic.net/manual/en/index.html),
and refer to the Operating Instructions (HTML or PDF).
Read this document when using the AK-HRP1010G Remote Operation Panel in
conjunction with AG-CX350 Memory Card Camera-Recorder.
Operating Guide
Remote Operation Panel
Model No. AK-HRP1010G

Connecting the Unit to AG-CX350 Cameras 3
Connections 3
Compatible Functions List 4
ROP Menu (during AG-CX350 Connection) 9
ROP menu list 9
PAINT 11
SHUTTER 11
PEDESTAL 12
CHROMA 13
GAIN 14
COLOR TEMP 15
WHITE BALANCE 16
GAMMA 17
KNEE 18
WHITE CLIP 19
DRS 20
DETAIL 21
SKIN TONE DTL 22
MATRIX 23
COLOR CORRECTION 24
FUNCTION 26
SYSTEM CAM INFO 26
AUTO IRIS SETTING 27
MAINTENANCE 28
CAMERA MENU CONTROL 28
ROP VOL/BUTTON 28
IRIS LEVER SETTING 28
ROP SETTING 28
ROP INITIALIZE 28
ROP VERSION 28
SD CARD DATA SAVE 28
SD CARD DATA LOAD 28
SYSTEM 29
ROP IP SETTING 29
CAM IP SEARCH 29
MANUAL IP SETTING 29
CONNECT SETTING 29
CAMERA AUTH SETTING 29
ROP AUTH SETTING 29
AW CONTROLLER LINK 29
SWITCHER LINK 29
- 2 -
Table of Contents

Connecting the Unit to AG-CX350 Cameras
Connections
Use a LAN cable to connect the <REMOTE> connector at the rear of the AG-CX350 to the <LAN> connector of the AK-
HRP1010G.
Set the connection setting to “LAN(AG)” in the [CONNECT SETTING] menu.
C 0 1 : E N G
C O N N E C T S E T T I N G 1 / 9
CAM No.
SELECT
LAN(AG)
CAM1 LAN(AG)
CONNECT
MODE
CAM1
NON
CAM2
NON
CAM3
NON
CAM4
NON
CAM5
NON
CAM6
NON
CAM7
NON
CAM8
- 3 -
Connecting the Unit to AG-CX350 Cameras

Compatible Functions List
When the unit is used in conjunction with an AG-CX350 Memory Card Camera-Recorder, a portion of the unit’s button, dial, and other con-
trol functions will be limited or disabled. Be sure to refer to the following table.
Front panel 1
Front panel 2
Front panel 3
Front panel 4
Front panel 5
Front panel 6
Front panel 7
Front panel 8
Front panel 9
- 4 -
Connecting the Unit to AG-CX350 Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 1
[POWER HEAD] button ✓Always lit.
[POWER VF] button ×
[BARS/TEST] button ✓Only the ON/OFF for the color bar signal output will
function.
[REF. RECALL] button ×
[AUTO WHITE] button ✓Functions when [WHITE BALANCE] > [W.BAL
SELECT] is set to "A" or "B".
[AUTO BLACK] button ✓
[AUTO SET UP] button ×
[CHARA] button ✓
[MATRIX] button ✓
[SKIN DTL] button ✓This only turns skin detail A ON/OFF.
Functions when [MAINTENANCE] > [ROP
VOL/BUTTON] > [SKIN DTL SW] is set to "HD".
[DRS] button ✓
[B.GAMMA] button ×
[ASSIGN] button ✓Functions only when the following functions have
been assigned.
GAMMA: GAMMA
FLARE: FLARE
KNEE: KNEE
W.CLIP: WHITE CLIP
H.COL: HIGH COLOR
HD.D: HD DETAIL
HDR.K: HLG KNEE
Front panel 2
[ASSIGN STATUS] button ✓
Buttons [1] to [5] (CONTROL/MODE) ✓
[CONTROL/MODE] button ✓Functions only when the following functions have
been assigned.
[CONTROL] button
SHUT: SHUTTER SPEED
PED: PEDESTAL
U.CHRM: UHD CHROMA
GAIN: RB GAIN
TEMP: COLOR TEMP
FLARE: FLARE
GAMMA: GAMMA
KNEE: KNEE
W.CLIP: WHITE CLIP
DRS: DRS
HD.D: HD DETAIL
H.S.DTL: HD SKIN TONE DTL
MATRIX: LINEAR MATRIX
C.CORR: COLOR CORRECTION
A.IRIS: AUTO IRIS SETTING
CAM_MN: CAMERA MENU
[MODE] button
GAMMA: GAMMA
FLARE: FLARE
KNEE: KNEE
W.CLIP: WHITE CLIP
H.COL: HIGH COLOR
HD.D: HD DETAIL
HDR.K: HLG KNEE
MN_OPE: MENU OPE
- 5 -
Connecting the Unit to AG-CX350 Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 3
LCD panel ✓
[MENU] dial ✓
[EXIT] button ✓
[UNDO] button ×
[MENU] button ✓
Front panel 4
[ON] indicator (SCENE FILE) ✓This is always lit.
Scene file page switching button ×
[1/6], [2/7], [3/8], [4], and [5] buttons
(SCENE FILE)
✓Scenes 1 to 6 are enabled.
[STORE] button ✓When you press this at the same time as the [HEAD]
button, recording starts or stops.
When the unit is connected with a camera, the G/L
area of the status screen becomes a recording
ON/OFF indicator.
Front panel 5
[ND] indicator ✓
[ND] setting buttons ✓
[ND] display ✓
[CC] indicator ×
[CC] setting buttons ×
[CC] display ×
[HEAD] button × When you press this at the same time as the
[STORE] button, recording starts or stops.
When the unit is connected with a camera, the G/L
area of the status screen becomes a recording
ON/OFF indicator.
[ECC] button ×
[M.GAIN] indicator ✓
[M.GAIN] setting buttons ✓
[M.GAIN] display ✓
[VAR] button ×
- 6 -
Connecting the Unit to AG-CX350 Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 6
[SHUTTER] display ✓Display varies depending on the shutter mode.
When fixed shutter is selected:
Displays the numerical value for the denom-
inator of the shutter speed.
When synchro scan (time display) is selected:
Displays the numerical value for the denom-
inator of the shutter speed. When the value is
four or more digits, the digits after the decimal
point are not displayed.
When synchro scan (shutter open angle dis-
play) is selected:
Displays the shutter open angle.
[ON] button (SHUTTER) ✓
[SYNC] button (SHUTTER) ✓Changes the shutter mode of the electronic shutter.
OFF:
Fixed shutter (FIX)
ON:
Synchro scan (SYNC)
[SHUTTER] setting buttons ✓
Front panel 7
[GAIN R], [GAIN G], and [GAIN B]
dials
✓[GAIN G] dial is disabled.
[BLACK R], [BLACK G], and [BLACK
B] dials
✓FLARE control is not supported. "-" is displayed.
[FLARE] button ✓
[PAINT LOCK] button ✓
[DTL] dial ✓Functions when [MAINTENANCE] > [ROP
VOL/BUTTON] > [DTL VOL] is set to "HD".
[CAM SEL] indicator ✓
[SELECT] dial ✓
[TEMP] indicator ✓
[SYNC] indicator ✓
[MFLR] indicator ×
[USER] indicator ✓Functions only when the following functions have
been assigned.
GAIN: GAIN
M.GAMM: MASTER GAMMA
H.CHRM: HD CHROMA GAIN
DRS: DRS
KNEE.S: KNEE SLOPE
H.S.DTL: HD SKIN TONE DTL
- 7 -
Connecting the Unit to AG-CX350 Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 8
[EXT] indicator ×
[D.EXT] indicator ×
[IRIS] lever ✓
[M.PED] dial ✓
[RELATIVE] button ✓
[SENSE] dial ✓
[COARSE] dial ✓
[IRIS] display ✓
[AUTO] button ✓
[CLOSE] button ×
[M.PED] display ✓
[IRIS LOCK] button ✓
[M.PED LOCK] button ✓
Front panel 9
Camera number/tally display ✓
[ALM] indicator ✓
[OPT] indicator ×
[PANEL ACTIVE] button ✓
[CALL] button ×
[PREVIEW] button ✓
Memory card slot ✓
Memory card access indicator ✓
Torque adjustment screw ✓
- 8 -
Connecting the Unit to AG-CX350 Cameras

ROP Menu (during AG-CX350 Connection)
ROP menu list
When an AG-CX350 Memory Card Camera-Recorder is connected, the ROP menu will be as follows. For setting values related to the cam-
era, refer to the Operating Instructions for the camera.
For details on menu operations, refer to the following items in the Operating Instructions and “Addition of [MENU OPE] to [ROP SETTING]
in the [MAINTENANCE] menu” in “Functions Added by Version Updates”.
For items with which the menu layout changes depending on the [MENU OPE] setting (“Touch” or “Legacy”), the layout of each menu is
referred to as Touch mode and Legacy mode.
“Displaying menus”
“Basic menu operations”
NOTE
To perform menu operations, upgrade the version of the unit system to 1.10-00-0.04 or later.
The setting values of functions that are not supported are indicated as “－”.
PAINT
SHUTTER “SHUTTER” (see page 11)
PEDESTAL “PEDESTAL” (see page 12)
CHROMA “CHROMA” (see page 13)
GAIN “GAIN” (see page 14)
COLOR TEMP “COLOR TEMP” (see page 15)
WHITE BALANCE “WHITE BALANCE” (see page 16)
GAMMA “GAMMA” (see page 17)
KNEE “KNEE” (see page 18)
WHITE CLIP “WHITE CLIP” (see page 19)
DRS “DRS” (see page 20)
DETAIL “DETAIL” (see page 21)
SKIN TONE DTL “SKIN TONE DTL” (see page 22)
MATRIX “MATRIX” (see page 23)
COLOR CORRECTION “COLOR CORRECTION” (see page 24)
FUNCTION
SYSTEM CAM INFO “SYSTEM CAM INFO” (see page 26)
AUTO IRIS SETTING “AUTO IRIS SETTING” (see page 27)
MAINTENANCE
CAMERA MENU CONTROL “CAMERA MENU CONTROL” (see page 28)
ROP VOL/BUTTON Refer to the following section in the Operating Instructions.
“MAINTENANCE”
IRIS LEVERSETTING
ROP SETTING
ROP INITIALIZE
ROP VERSION
SD CARD DATA SAVE
SD CARD DATA LOAD
- 9 -
ROP Menu (during AG-CX350 Connection)

SYSTEM
ROP IP SETTING Refer to the following section in the Operating Instructions.
“SYSTEM”
CAMIP SEARCH
MANUAL IP SETTING
CONNECT SETTING
CAMERA AUTH SETTING
ROP AUTH SETTING
AW CONTROLLER LINK
Refer to the following sections in “Functions Added by Version
Updates”.
“Functions Linking with AW-RP150”
SWITCHER LINK
Refer to the following sections in “Functions Added by Version
Updates”.
“Functions Linking with AV-HS6000/AV-UHS500”
- 10 -
ROP Menu (during AG-CX350 Connection)

PAINT
SHUTTER
Touch mode
C 0 1 : E N G
S H U T T E R
SPEED
MODESHUTTER
1 / 1
SYNC
TYPE
A.SHTTER
LIMIT
AUTO
SHUTTER A.SHTTER POINT
SPEED
SEC 100
OFF 250 F8.0
ON FIX
Legacy mode
C 0 1 : E N G
S H U T T E R
SPEED
MODESHUTTER
1 / 1
SYNC
TYPE
A.SHTTER
LIMIT
AUTO
SHUTTER A.SHTTER POINT
SPEED
SEC
OFF 250 F8.0
ON FIX
100
Item Setting details
SHUTTER Switches the shutter function ON/OFF.
SPEED MODE Switches between fixed shutter and synchro scan.
SYNC TYPE Switches the unit of the shutter setting.
SPEED Sets the shutter speed in the unit selected in [SPEED MODE].
AUTO SHUTTER Switches the auto shutter function ON/OFF.
AUTO SHUTTER LIMIT Sets the upper limit of the auto shutter speed.
AUTO SHUTTER POINT Sets the F value to switch control from auto iris to auto shutter during auto shutter operation.
- 11 -
ROP Menu (during AG-CX350 Connection)

PEDESTAL
C 0 1 : E N G
P E D E S T A L 1 / 1
+16
OFFSETM.PED
0 00
G PEDR PED B PED
OFF
Item Setting details
M.PED Adjusts the black level (master pedestal level adjustment).
OFFSET Sets whether or not to retain the pedestal levels of the R, G, and B channels when the auto black balance is
adjusted.
R PED Sets the red correction level for the master pedestal.
G PED Sets the green correction level for the master pedestal.
B PED Sets the blue correction level for the master pedestal.
- 12 -
ROP Menu (during AG-CX350 Connection)

CHROMA
C 0 1 : E N G
C H R O M A
LEVEL %
1 / 1
PHASE
0 0
Item Setting details
LEVEL % Sets the chroma level for the PRand PBsignals.
PHASE Finely adjusts the chroma phase for the PRand PBsignals.
- 13 -
ROP Menu (during AG-CX350 Connection)

GAIN
Touch mode
C 0 1 : E N G
G A I N 1 / 1
AGC
POINT
F4.06dBOFF12dB
AGCGAIN AGC LIMIT
Legacy mode
C 0 1 : E N G
G A I N 1 / 1
AGC
POINT
F4.06dBOFF
12dB
AGC
GAIN
AGC
LIMIT
Item Setting details
GAIN Adjusts the gain of video.
AGC Turns auto gain control ON/OFF.
AGC LIMIT Sets the maximum gain value for when [AGC] is “ON”.
AGC POINT Sets the F value to switch control from auto iris to auto gain when [AGC] is “ON”.
- 14 -
ROP Menu (during AG-CX350 Connection)

COLOR TEMP
Touch mode
C 0 1 : E N G
C O L O R T E M P 1 / 1
0 0 0
G GAINR GAIN B GAIN
3200
COLOR
TEMP
Legacy mode
C 0 1 : E N G
C O L O R T E M P 1 / 1
0 0 0
3200
G GAINR GAIN B GAIN
COLOR
TEMP
Item Setting details
R GAIN Sets the red correction level for the color temperature.
G GAIN Sets the green correction level for the color temperature.
B GAIN Sets the blue correction level for the color temperature.
COLOR TEMP Sets the color temperature.
- 15 -
ROP Menu (during AG-CX350 Connection)

WHITE BALANCE
Touch mode
C 0 1 : E N G
W H T E B A L A N C E 1 / 1
0 0
R GAIN
00
ATW
TRGT B
ATW
TRGT R
W.BAL
SELECT B GAIN
ATW
SPEED
GAIN
OFFSET
OFFA
NORMAL
Legacy mode
C 0 1 : E N G
W H T E B A L A N C E 1 / 1
0 0
R GAIN
00
ATW
TRGT B
ATW
TRGT R
W.BAL
SELECT
B GAIN
ATW
SPEED
GAIN
OFFSET
OFFA
NORMAL
Item Setting details
W.BAL SELECT Sets the mode for the white balance.
GAIN OFFSET Sets the value of the R channel gain and B channel gain for when [W.BAL SELECT] is set to A (AWB A) or B
(AWB B) and automatic white balance is performed.
R GAIN Adjusts the R channel gain.
B GAIN Adjusts the B channel gain.
ATW SPEED Sets the control speed of the auto tracking white balance function.
ATW TRGT R Finely adjusts the R channel output for convergence with the auto tracking white balance operation.
ATW TRGT B Finely adjusts the B channel output for convergence with the auto tracking white balance operation.
- 16 -
ROP Menu (during AG-CX350 Connection)

GAMMA
Touch mode
SW
F-REC
DYNMC LV V-REC K.SLOPE V-REC K.POINT
F-REC
BLK.S LV
BLACK
GAMMA B.GAMMA RANGE
HD -
C 0 1 : E N G
G A M M A 1 / 1
GAMMAMODE
0.45
1
5000600 30
0
Legacy mode
SW
F-REC
DYNMC LV
V-REC
K.SLOPE V-REC K.POINT
F-REC
BLK.S LV
HD -
C 0 1 : E N G
G A M M A 1 / 2
GAMMAMODE
0.45
500
0600
30
BLACK
GAMMA B.GAMMA RANGE
C 0 1 : E N G
2 / 2
10
G A M M A
Item Setting details
MODE Selects the gamma mode.
GAMMA Adjusts the gamma correction level. This is enabled when [MODE] is other than “HLG”.
SW Sets gamma correction to ON/OFF. This does not work with AG-CX350.
F-REC DYNMC LV Sets the dynamic range. This is enabled when [MODE] is “F-REC” (FILM REC).
F-REC BLK.S LV Sets the black stretch. This is enabled when [MODE] is “F-REC” (FILM REC).
V-REC K.SLOPE Sets the knee slope. This is enabled when [MODE] is “V-REC” (VIDEO REC).
V-REC K.POINT Sets the knee point. This is enabled when [MODE] is “V-REC” (VIDEO REC).
BLACK GAMMA Sets the gamma curve for dark areas.
B.GAMMA RANGE Sets the maximum level for compression/expansion.
- 17 -
ROP Menu (during AG-CX350 Connection)

KNEE
Touch mode
C 0 1 : E N G
K N E E 1 / 1
99
4
SLOPEMODE H.COLOR SW
OFF
AUTO
-
A.KNEE
LEVEL
93.0
POINT
A.KNEE
POINT
10
HLG.K
SLOPE
55
HLG.K
POINT
A.KNEE
RSPNS
HLG.K
SW
- -
Legacy mode
C 0 1 : E N G
K N E E 1 / 2
99
4
SLOPEMODE
OFF
AUTO
A.KNEE
LEVEL
93.0
POINT
A.KNEE
POINT
10
HLG.K
SLOPE
55
HLG.K
POINT
A.KNEE
RSPNS
HLG.K
SW
--
C 0 1 : E N G
K N E E 2 / 2
H.COLOR
SW
-
Item Setting details
MODE Sets the operating mode for gradation compression (knee).
POINT Sets the compression level (knee point) position for high-brightness video signals.
This is enabled when [MODE] in the [GAMMA] menu is other than “HLG”, and [MODE] is “MANUAL”.
SLOPE Sets the knee slope.
This is enabled when [MODE] in the [GAMMA] menu is other than “HLG”, and [MODE] is “MANUAL”.
H.COLOR SW Sets the mode that expands the color dynamic range to ON/OFF. This does not work with AG-CX350.
A.KNEE RSPNS Sets the auto knee response speed.
This is enabled when [MODE] in the [GAMMA] menu is other than “HLG”.
A.KNEE POINT Sets the auto knee point position in 1% steps. This does not work with AG-CX350.
A.KNEE LEVEL Sets the auto knee level. This does not work with AG-CX350.
HLG.K SW Turns the knee operation for HLG ON/OFF.
This is enabled when [MODE] in the [GAMMA] menu is “HLG”.
HLG.K POINT Sets the knee point position for HLG.
This is enabled when [MODE] in the [GAMMA] menu is “HLG”.
HLG.K SLOPE Sets the knee slope for HLG.
This is enabled when [MODE] in the [GAMMA] menu is “HLG”.
- 18 -
ROP Menu (during AG-CX350 Connection)

WHITE CLIP
C 0 1 : E N G
W H I T E C L I P 1 / 1
109
LEVEL(%)SW
ON
Item Setting details
SW Enables or disables the white clip function.
This is enabled when [MODE] in the [GAMMA] menu is other than “HLG”.
LEVEL(%) Sets the white clip level.
This is enabled when [MODE] in the [GAMMA] menu is other than “HLG”, and [WHITE CLIP SW] is
“ON”.
- 19 -
ROP Menu (during AG-CX350 Connection)

DRS
Touch mode
C 0 1 : E N G
DRS 1 / 1
EFFECT
DEPTH
OFF
SW
1
Legacy mode
C 0 1 : E N G
DRS 1 / 1
EFFECT
DEPTH
OFF
SW
1
Item Setting details
EFFECT DEPTH Sets the compression level for high-brightness areas of the dynamic range stretcher function.
SW Switches the dynamic range stretcher function ON/OFF.
- 20 -
ROP Menu (during AG-CX350 Connection)