Panasonic ET-RFL100 User manual

DPQX1200ZB/X1
Printed in China
Model No. ET-RFL100
ENGLISH
Operating Instructions
ENGLISH
Replacement Filter Unit Commercial Use
Thank you for purchasing this Panasonic product.
JPlease read these operating instructions and the projector operating
instructions carefully, and then use this product correctly.
JPlease save this Operating Instructions for future use.

Notes on replacing the air filter unit
zTurn o󰀨 the power before you replace the air lter unit.
zWhen attaching the air lter unit, make sure that the projector is stable, and
work in an environment that is safe, even in the event of the air lter unit
dropping.
zDo not operate the projector with the lter removed. Dust may accumulate on
the optical elements degrading picture quality.
zDo not put anything into the air vents. Doing so may result in malfunction of
the projector.
zDo not wash the lter with water or any other liquid matter. Otherwise the
lters may be damaged.
E-2
Read this rst!

ENGLISH
Replacing the air lter unit
JReplacement of the air
lter unit
1) Remove the air lter unit.
zTurn over the projector. Place
the latch in the OPEN position
and pull out the lter (bottom) in
the arrow direction.
2) Replace the air lter unit.
zPut new lter back into the
position. Make sure that the
lter is fully inserted to the
projector, and place back the
latch in the LOCK position.
3) Resetting the Filter Counter
zBe sure to reset the [Filter
counter] after replacing the
lter.
E-3
JAir lter unit
Filter prevents dust from accumulating on the optical elements inside the
projector. Should the lter become clogged with dust particles, it will reduce
cooling fans’ e󰀨ectiveness and may result in internal heat buildup and adversely
a󰀨ect the life of the projector. If a “Filter warning” icon appears on the screen,
replace the lter immediately.
Filter Latch

Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/
© Panasonic Connect Co., Ltd. 2022