Panasonic HM500 Series User manual

TOUCH TERMINALS
HM500
Instruction Manual
ACGM0194V2EN Version 2.0
2021.04 https://industry.panasonic.eu

2
Table of contents
1. Introduction ...................................................................................................................................3
2. Product overview ..........................................................................................................................4
3. Standards and approvals .............................................................................................................5
4. Productidentication ...................................................................................................................6
5. Technical data common to all models.........................................................................................7
5.1 Hardwarespecications ........................................................................................................7
5.2 Environmental conditions ......................................................................................................7
5.3 Electromagnetic compatibility (EMC) ....................................................................................8
5.4 Durability information ............................................................................................................8
5.5 Viewing angles ......................................................................................................................8
6. Technical data by model...............................................................................................................9
7. Dimensions ..................................................................................................................................10
7.1 HM504.................................................................................................................................10
7.2 HM507, HM510, HM513 ..................................................................................................... 11
8. Installation ..................................................................................................................................12
8.1 Installation environment ......................................................................................................12
8.2 Applying the gasket.............................................................................................................12
8.3 Installation procedure..........................................................................................................13
9. Connections.................................................................................................................................14
9.1 HM504.................................................................................................................................14
9.2 HM507, HM510 and HM513 ...............................................................................................14
9.3 Serial port............................................................................................................................15
9.4 Ethernet port .......................................................................................................................15
9.5 Optional plug-ins .................................................................................................................16
9.6 Power supply, grounding, and shielding .............................................................................17
10. Battery ..........................................................................................................................................18
11. Cleaning faceplates.....................................................................................................................18
12. Getting started.............................................................................................................................18
13. System settings tool ..................................................................................................................19
13.1 Introduction .........................................................................................................................19
13.2 Options available in user mode ..........................................................................................20
13.3 Options available in system mode .....................................................................................20
14. LED indicator on the front ..........................................................................................................21
15. Unpacking and packing instructions ........................................................................................21
16. Record of changes ......................................................................................................................22

3
Introduction
1. Introduction
This instruction manual contains information about the installation, transportation, storage, assembly,
use and maintenance of programmable displays of the HM500 series.
The following models are available:
• HM504: Programmable display with TFT color 4.3” display touchscreen
• HM507: Programmable display with TFT color 7” widescreen display touchscreen
• HM510: Programmable display with TFT color 10.4” display touchscreen
• HM513: Programmable display with TFT color 13.3” widescreen display touchscreen

4
Product overview
2. Product overview
The HM500 series programmable displays combine state-of-the-art features and top performance with
an oustanding design. They are the ideal choice for all demanding HMI applications including factory
and building automation.
The HM500 series programmable displays have been designed to run the HMWIN software.
●HMWIN runtime included. Full compatibility with HMWIN Studio.
●Full vector graphic support. Native support of SVG graphic objects. Trasparency and alpha blend-
ing.
●Full object dynamics: control visibility and transparency, move, resize, rotate any object on screen.
Change properties of basic and complex objects.
●TrueType fonts.
●Multilanguage applications. Easily create and manage your applications in multiple languages to
meet global requirements. Far East languages are supported. Tools available in HMWIN Studio
support easy third-party translations and help reducing development and maintenance costs of the
application.
●Data display in numerical, text, bargraph, analog gauges and graphic image formats.
●Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed
actions (daily and weekly schedulers, exception dates), recipes, users and passwords, RSS feeds,
rotating menus.
●Multiple drivers communication capability.
●Remote monitoring and control. Client-Server functionality.
● O󰀨-linesimulationwithHMWINStudio.
● PowerfulscriptinglanguageforautomatingHMIapplications.Scriptdebuggingimprovese󰀩ciency
in application development.
●Rich gallery of vector symbols and objects.
●Project templates.
●Optional plug-in modules.

5
Standards and approvals
3. Standards and approvals
The products have been designed for use in an industrial environment in compliance with the
2004/108/EC EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
The installation of these devices into the residential, commercial and light-industrial environments
is allowed only in the case that special in measures are taken in order to ensure conformity to
EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS)
Directive 2011/65/EC
In compliance with the above regulations the products are CE marked.

6
Productidentication
4. Productidentication
Theproductmaybeidentiedthroughaplateattachedtotherearcover.Youwillhavetoknowthe
type of unit you are using for correct usage of the information contained in the guide.
The following information is provided by the plate:
●Product model name
●Product part number
●Month/year of production
●Serial number
●Version ID of the product

7
Technical data common to all models
5. Technical data common to all models
5.1 Hardwarespecications
Touch screen technology Resistive
Back-up battery 3V 50mAh Lithium, rechargeable, not user-replaceable, model
VL2330.
Fuse Automatic
Serial Port RS232,RS485,RS422softwarecongurable
User memory • Flash 128Mb for HM504 and HM507
• Flash 256Mb for HM510 and HM513
Recipe memory Flash
Real-time clock Clock/Calendar with backup battery
Accuracy real-time clock
(at 25°C)
<100ppm
5.2 Environmental conditions
Operating temperature
(surrounding air temperature)
0 – +50°C EN 60068-2-14
Storage temperature -20 – +70°C EN 60068-2-14
Operating and storage humidity 5 – 85% RH not-condensing EN 60068-2-30
Vibrations 5 – 9 Hz, 7mm p-p
9 – 150Hz, 1g
EN 60068-2-6
Shock ± 50g, 11ms, 3 pulses per axis EN 60068-2-27
Degree of protection IP66 front panel (see note) EN 60529
* The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the stan-
dards shown in the “Environmental conditions”. Even though the level of resistance unit is equivalent to these
standards,oilsthatshouldhavenoe󰀨ectonthecanpossiblyharmtheunit.Thiscanoccurinareaswhere
either vaporized oils are present, or where low viscosity cutting oil are allowed to adhere to the unit for long
periodsoftime.Ifthefrontfaceprotectionsheetonthebecomespeeledo󰀨,theseconditionscanleadtothe
ingress of oil into the and separate protection measures are suggested.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from
the panel, the original degree of the protection cannot be guaranteed.

8
Technical data common to all models
5.3 Electromagnetic compatibility (EMC)
Radiated disturbance test Class A EN 55011
Electrostatic discharge immunity test 8kV (air electrostatic discharge)
4kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio-frequency,
electromagneticeldimmunitytest
80MHz – 1GHz, 10V/m
1,4GHz – 2GHz, 3V/m
2GHz – 2.7GHz, 1V/m
EN 61000-4-3
Burst immunity test ± 2KV DC power port
± 1KV signal line
EN 61000-4-4
Surge immunity test ± 0,5KV DC power port (line to earth)
± 0,5KV DC power port (line to line)
± 1KV signal line (line to earth)
EN 61000-4-5
Immunity to conducted disturbances
inductedbyradiofrequencyeld
0.15 – 80 MHz, 10V EN 61000-4-6
5.4 Durability information
Backlight service life (LED type) 40000 hours or more (Time of continuos operation until the
brightness of the backlight reaches 50% of the rated value
when the surrounding air temperature is 25°C, see note 1)
Front foil (without direct
exposure to sunlight or UV rays)
10 years if the surrounding air temperature is 25°C
UV resistance Indoor applications: After 300 hours cycled humidity in QUV
accelerated weathering, some yellowing and brittleness may
be present (see note 2).
Touch screen reliability > 1 milion operations
1. Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight
quality/reliability/durability.
2. Solvent resistance:
Contactfor1/2hourat21°C,novisiblee󰀨ect:acetone,butylcellosolve,cyclohexanone,ethylacetate,hexane,
isopropyl alcohol, mek, methylene chloride, toluene, xylene
Contactfor24hoursat49°C,novisiblee󰀨ect:co󰀨ee,ketchup,lemonjuice,mustard(slightyellowstain),tea,
tomato juice.
5.5 Viewing angles
Theviewinganglesforthehorizontal(L,R)andvertical(U,D)axesarespeciedinreferencetothe
vertical axis of the display. The viewing angles always refer to the standard mounting orientation.
For the viewing angle values (U, D ,R ,L), refer to the technical data of the respective touch terminal
model.
U: From top
L: From left
D: From bottom
R: From right

9
Technical data by model
6. Technical data by model
Model HM504 HM507
Display / Backlight TFT Color / LED
Colors 64K
Resolution 480x272 800x480
Display size (inch) 4.3” 7” widescreen
Dimming yes
Horizontal viewing angle L/R: typ. 50° L/R: typ. 65°
Vertical viewing angle U: typ. 45°, D: typ. 50° U: typ. 55°, D: typ. 65°
Usermemoryash 128MB
SD card slot yes
Recipe memory Yes.Flashmemorystoragelimitedonlybyavailablememory
Serial port RS232,RS485,RS422DB9femalesoftwarecongurable
Ethernet port 2 10/100Mbit with integrated switch
USB port 1 Host interface version 2.0 and 1.1 2 Host interfaces, 1 version 2.0,
1 version 2.0 and 1.1
Expansion slot 1 Optional plug-in 2 Optional plug-ins
Battery rechargeable
Real-time clock yes
Voltage 10–32V DC (see note)
Current rating (at 24V DC) 0.4A 0.65A
Weight 1kg 1kg
Model HM510 HM513
Display / Backlight TFT Color / LED
Colors 64K
Resolution 800x600 1280x800
Display size (inch) 10.4 widescreen 13.3” widescreen
Dimming yes
Horizontal viewing angle L/R: typ. 80° L/R: typ. 70°
Vertical viewing angle U/D: typ. 70° U/D: typ. 60°
Usermemoryash 256MB
SD card slot yes
Recipe memory Yes.Flashmemorystoragelimitedonlybyavailablememory
Serial port RS232,RS485,RS422DB9femalesoftwarecongurable
Ethernet port 2 10/100Mbit with integrated switch
USB port 2 Host interfaces, 1 version 2.0, 1 version 2.0 and 1.1
Expansion slot 2 Optional plug-ins
Battery rechargeable
Real-time clock yes
Voltage 10–32V DC (see note)
Current rating (at 24V DC) 1A 1.2A
Weight 2.1kg 2.8kg
* ForapplicationsrequiringcompliancewithEN61131-2andspecicallyinreferenceto10msvoltagedips,the
minimum power supply voltage is 18V DC.

10
Dimensions
7. Dimensions
7.1 HM504
Cutout
Model A B C D E F
HM504 149mm 109mm 136mm 96mm 56mm 4mm

11
Dimensions
7.2 HM507, HM510, HM513
Cutout
Model A B C D E F
HM507 187mm 147mm 176mm 136mm 47mm 4mm
HM510 287mm 232mm 276mm 221mm 56mm 4mm
HM513 336mm 267mm 326mm 256mm 56mm 4mm

12
Installation
8. Installation
8.1 Installation environment
The equipment is not intended for continuous exposure to direct sunlight. This might accelerate the
agingprocessofthefrontpanellm.
The equipment is not intended for installation in contact with corrosive chemical compounds. Check
theresistanceofthefrontpanellmtoaspeciccompoundbeforeinstallation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel.
In order to meet the front panel degree of protection if the following requirements are met:
• Thebordersofthecutoutmustbeat
• Eachxingscrewmustbetighteneduntiltheplasticbezelcornergetincontactwiththepanel.
• The cutout for the panel must be of the dimensions indicated in this manual.
The IP66 is guaranteed only if:
• Themax.deviationfromtheplanesurfacetothecut-outis≤0.5mm
• The thickness of the case where the equipment is mounted is from 1.5mm to 6mm
• Themax.surfaceroughnesswherethegasketisappliedis≤120um.
8.2 Applying the gasket
The gasket should be applied on the rear of the frame.
HM504, HM507 HM510, HM513
A: Gasket
B: Installation cutout

13
Installation
8.3 Installation procedure
Placethexingbracketsasshowninthegurebelow.
Makesuretoscreweachxingscrewuntilthebezelcornergetsincontactwiththepanel.

14
Connections
9. Connections
9.1 HM504
1Serial port
22x Ethernet port
3USB port
4Power supply
5Expansion slot for plug-ins
6SD card slot
9.2 HM507, HM510 and HM513
1Serial port
22x Ethernet port
32x USB port
4Power supply
52x Expansion slot for plug-ins
6SD card slot

15
Connections
9.3 Serial port
The serial port is used to communicate with the PLC or with another type of controller.
Di󰀨erentelectricalstandardsareavailableforthesignalsinthePLCportconnector:RS232,RS422,
RS485. Use the corresponding communication cable for the connection.
The serial port is software programmable. Make sure you select the appropriate interface in the pro-
gramming software.
RS232 RS422, RS485
Pin Description
Serial port
Pin Description
1 GND 1 GND
2 2
3 TX 3 CHA-
4 RX 4 CHB-
5 5
6 +5V output 6 +5V output
7 CTS 7 CHB+
8RTS 8 CHA+
9 9
For RS485, pins 4-3 and 8-7
must be connected externally.
9.4 Ethernet port
The Ethernet ports have two status indicators. They work as shown in the picture below.
OFF: Valid link has NOT been detected
ON: Valid link has been detected
ON: No activity
BLINKING: Activity

16
Connections
9.5 Optional plug-ins
There are several optional plug-ins available for the HM500 series. Depending on the panel type, there
are one or two expansion slots.
Slot #2 and slot #4 are available only if the plugin module is equipped with the bus extension connector.
Module Application Max. No. of plug-ins Bus extension connector
PLCM03 Serial RS232 2 Yes
PLCM04 Serial RS485 2 Yes
If you are planning to use PLCM03 and PLCM04 (additional serial ports), the COM port numbers will
be assigned as follows:
●A module plugged in slot #1 or slot #2 will be COM2,
●A module plugged in slot #3 or slot #4 will be COM3.

17
Connections
9.6 Power supply, grounding, and shielding
Thepowersupplyterminalblockisshowninthegurebelow.
+24V
Common
NOTICE
Makesurethatthepowersupplyhassu󰀩cientpowercapacityfortheoperationoftheequipment.
Theunitmustalwaysbegroundedtoearth.Groundinghelpslimitthee󰀨ectsofnoiseduetoelectro-
magnetic interference on the control system.
Earth connection will have to be done using either the screw or the faston terminal located near the
power supply terminal block. A label helps identify the ground connection. Also ground the terminal 3
on the power supply terminal block.
Thepowersupplycircuitmaybeoatingorgrounded.Inthelattercase,connecttogroundthepower
sourcecommonasindicatedwithadashedlineinthegurebelow.
Whenusingtheoatingpowerscheme,notethatinternallythepowercommonisconnectedtothe
groundwitha1MΩresistorinparallelwitha4,7nFcapacitor.
The power supply must have double or reinforced insulation. The suggested wiring for the power sup-
ply is shown below.
HM5xx
All the electronic devices in the control system must be properly grounded. Grounding must be per-
formed according to applicable regulations.

18
Battery
10. Battery
The touch panels are equipped with rechargeable Lithium batteries that are not user-replaceable. The
battery is needed to keep the real-time clock running (date and time).
Whenthetouchpanelisinstalledforthersttime,thebatterymustbechargedfor48hours.Whenthe
battery is fully charged, data backup at 25°C is guaranteed for 3 months.
Battery
HM504 HM507, HM510, HM513
NOTICE
Dispose of batteries according to local regulations.
11. Cleaning faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
12. Getting started
The HM500 series panels must be programmed with the programming software HMWIN Studio, a
Windows application. To program a panel you will have to connect the panel via the Ethernet interface
to a personal computer running the HMWIN Studio software.
MakesurethattherewallpolicyisconguredinawaythatallowsHMWINStudiotoaccessthe
network. The version of the HMWIN Studio used must be compatible with the HMWIN runtime version
installed on the panel to be programmed.

19
System settings tool
13. System settings tool
13.1 Introduction
The panels have a system settings tool to allow basic and preliminary settings. The system settings
tool comes in the shape of a rotating menu with navigation buttons at the top and the bottom to move
between the available options. The tool is shown in the picture below.
On the left side, a component or functions is highlighted. The right side shows information about the
current version, when applicable. The picture below shows the version of the Main OS component.
The system settings tool has two operating modes:
• User mode and
• System mode.
Thedi󰀨erencebetweenthemisonlyinthenumberofavailableoptions.
To activate the system settings in user mode, you need to access the context menu by touching and
holding any unused area of the touchscreen for a few seconds. The default holding time is 2 seconds
and can be changed.
To activate the system settings in system mode, you need to tap the middle of the touchscreen re-
peatedly at a high frequency while the system is powering up. This only works during power-up.

20
System settings tool
13.2 Options available in user mode
User mode is the simplest possible interface, where a generic user can get access to the basic set-
tings of the panel:
Calibrate touch Allows to calibrate the touch screen interface
Network Allows to change the options of the panel on-board network card
Time Allows to change the real-time clock options including time zone and DST
Display settings Automaticbacklightturno󰀨andbrightnessadjustment
BSP settings Allows to check the BSP (Board Support Package) version (e.g. 2.37), the op-
erating hours timers for both the unit and backlight, enable/disable the buzzer,
enable/disable the use of the “low battery” front LED indicator
Plugin list Allows to check whether optional plugin modules are installed
13.3 Options available in system mode
System mode is the complete interface of the system settings tool where all options are available. In
addition to the options listed under “13.2 Options available in user mode” on page 20, the following
important options are available:
Format Flash Allowstoformattheinternalpanelashdisk
Resize Image Area Allowstoresizetheashportionreservedtostorethesplash
screen image displayed by the unit at power-up; default settings
are normally ok for all the units
DownloadCongurationOS Allows to check current version and upgrade the backup operating
system.
Download Main OS Allows to check current version and upgrade the main operating
system
Download Splash Image Allows to change the splash screen image displayed by the unit at
powerup.Theimageneedstobeinaspecicformat.Wesuggest
to update the image directly from the HMWIN Studio software,
which supports this feature starting from version 1.50
Download Bootloader Allows to check the current version of the system boot loader and
to upgrade it
Only for HM510 and HM513
Download Main FPGA Allows to check the current version and upgrade the main FPGA
rmware
Download Safe FPGA Allows to check the current version and upgrade the backup
(safe)copyoftheFPGArmware,
Download System Supervisor Allows to check the current version and upgrade the system
supervisorrmwareresponsibleforthereal-timeclockandthe
handling of the power supply handling,
Note: the system settings tool includes also other options that are not described and not documented
in this manual.