Panasonic HMe Series User manual

ACGM0195V5EN Version 5.0
2023.01 https://industry.panasonic.eu
Touch Terminals
HMe Series
Instruction Manual

2ACGM0195V5EN Version 5.0
Subject to change without notice.
󰀨
to verify the accuracy of the information contained in this manual, it is provided “as is” without warranty of any
kind.
Third-party brands and names are the property of their respective owners.
This manual and everything described in it are copyrighted. You may not copy this manual, in whole or part,
without written consent of Panasonic.
Please direct support matters and technical questions to your local Panasonic representative.
Distributed by Panasonic Industry Europe GmbH
https://industry.panasonic.eu

3ACGM0195V5EN Version 5.0
Table of contents
1. Introduction ............................................................................................................................................... 4
2. Important symbols .................................................................................................................................... 4
3. Special instructions for use ..................................................................................................................... 5
4. Standards and approvals ......................................................................................................................... 5
5. Product overview ...................................................................................................................................... 6
6. Productidentication ............................................................................................................................... 6
7. Technical data common to all models..................................................................................................... 7
  .................................................................................................................... 7
7.2 Environmental conditions .................................................................................................................. 7
7.3 Electromagnetic compatibility (EMC) ................................................................................................ 8
7.4 Durability information ........................................................................................................................ 8
7.5 Viewing angles ..................................................................................................................................9
8. Technical data by model......................................................................................................................... 10
9. Product dimensions................................................................................................................................ 11
9.1 HMe04............................................................................................................................................. 11
9.2 HMe07............................................................................................................................................. 12
9.3 HMe10............................................................................................................................................. 13
10. Unpacking and packing instructions .................................................................................................... 14
11. Installation ............................................................................................................................................... 15
11.1 Installation environment .................................................................................................................. 15
11.2 Installation procedure...................................................................................................................... 16
12. Connections............................................................................................................................................. 17
12.1 HMe04............................................................................................................................................. 17
12.2 HMe07............................................................................................................................................. 17
12.3 HMe10............................................................................................................................................. 18
12.4 Serial port........................................................................................................................................ 19
12.5 Ethernet port ................................................................................................................................... 19
12.6 Power supply, grounding, and shielding.......................................................................................... 20
13. Getting started......................................................................................................................................... 21
14. Touchscreen calibration ......................................................................................................................... 22
15. Disposal ................................................................................................................................................... 22
16. Record of changes .................................................................................................................................. 23

Introduction
4ACGM0195V5EN Version 5.0
1. Introduction
This instruction manual contains information about the installation, transportation, storage, assembly,
use and maintenance of touch terminals of the HMe series.
The following models are available:
HMe04 Touch terminal with TFT color 4.3” widescreen display touchscreen
HMe07 Touch terminal with TFT color 7” widescreen display touchscreen
HMe10 Touch terminal with TFT color 10.1” widescreen display touchscreen
2. Important symbols
One or more of the following symbols may be used in this documentation to indicate the type of
hazard.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in serious or moderate injury.
Notice
Indicates a property damage message.

Special instructions for use
5ACGM0195V5EN Version 5.0
3. Special instructions for use
• 
IEC/EN 60664-1.
• The product shall be installed in an enclosure that provides a degree of protection not less than
IP54 in accordance with IEC/EN 60079-7.
• Transient protection shall be provided that is set at a level not exceeding 140% of the peak rated
voltage value at the supply terminals to the product.
• Install the product according to the accompanying installation instructions.
• Ground the product according to the accompanying installation instructions.
• 
• Keep the faceplate of the product clean. The product must be cleaned only with a soft cloth and
neutral soap product. Do not use solvents.
• This product should not be used for purposes and methods other than indicated in this document
and in the documentation accompanying the product.
4. Standards and approvals
The products have been designed for use in an industrial environment in compliance with the
2014/30/EU EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A EN 60079-0
EN 61000-6-3 EN 55022 Class B EN 60079-7
EN 60079-11
EN 61000-6-2 EN 61000-4-2
EN 61000-6-1 EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
The installation of these products in residential, commercial and light-industrial environments is
allowed only in the case that special measures are taken in order to ensure conformity with
EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS)
Directive 2011/65/EU.
In compliance with the above regulations the products are CE marked.

Product overview
6ACGM0195V5EN Version 5.0
5. Product overview
The HMe series touch terminals combine state-of-the-art features and top performance with an
outstanding design. They are the ideal choice for all demanding HMI applications including factory and
building automation.
The HMe series touch terminals have been designed to run the software HMWIN Studio.
• Compatible with HMWIN Studio.
• Full vector graphic support. Native support of SVG graphic objects, transparency and alpha
blending.
• Screen object dynamics: control visibility and transparency, move, resize, rotate any object on
screen. Change properties of basic and complex objects.
• Multilanguage applications with TrueType fonts. Easily create, install and maintain applications in
multiple languages to meet global requirements.
• Data display in numerical, text, bargraph, analog gauges and graphic image formats.
• Rich set of state-of-the-art HMI features: data acquisition and logging, trend presentation, alarm
handling, scheduler and timed actions (daily and weekly schedulers, exception dates), recipes,
security and user management, email and RSS feeds.
• Wide selection of communication drivers available with multiple-driver communication capability.
• Remote monitoring and control with client/server functionality.
• 󰀨
• 󰀩
productivity in application development.
• Rich gallery of vector symbols and objects.
6. Productidentication

product type you are using for correct usage of the information contained in the manual.
The following information is provided by the plate:
• Product model name
• Product part number
• Year/week of production
• Version ID of the product
• Serial number

Technical data common to all models
7ACGM0195V5EN Version 5.0
7. Technical data common to all models
7.1 Hardwarespecications
Touchscreen technology Resistive
Real-time clock back-up Supercapacitor
Fuse Automatic
Serial port 
Recipe memory Flash
Real-time clock Clock/calendar with supercapacitor back-up
Accuracy real-time clock (at 25°C) <100ppm
7.2 Environmental conditions
Operating temperature
(surrounding air temperature) 0 to +50°C EN 60068-2-14
Storage temperature -20 to +70°C EN 60068-2-14
Operating and storage humidity 5–85% RH non-condensing EN 60068-2-30
Vibrations
5–9Hz, 7mm p-p
9–150Hz, 1g
EN 60068-2-6
Shock ±50g, 11ms, 3 pulses per axis EN 60068-2-27
Degree of protection
IP66 (front), IP20 (rear)
* see note
EN 60529
Pollution degree environment 2
* The front face of the product, installed in a solid panel, has been tested using conditions equivalent to the
standards shown in this section. Even though the level of resistance of the product is equivalent to these
󰀨
either vaporized oils are present, or where low viscosity cutting oil is allowed to adhere to the product for long
󰀨
the ingress of oil into the product and separate protection measures are suggested. If the installation gasket is
used for a long period of time, or if the product and its gasket are removed from the panel, the original degree
of the protection cannot be guaranteed.

Technical data common to all models
8ACGM0195V5EN Version 5.0
7.3 Electromagnetic compatibility (EMC)
Radiated disturbance test Class A EN 55011
Electrostatic discharge immunity
test
8kV (air electrostatic discharge)
4kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio frequency,
electromagneticeldimmunitytest
80MHz–1GHz, 10V/m
1.4–2GHz, 3V/m
2–2.7GHz, 1V/m
EN 61000-4-3
Burst immunity test
±2kV DC power port
±1kV signal line
EN 61000-4-4
Surge immunity test
±0.5kV DC power port (line to earth)
±0.5kV DC power port (line to line)
±1kV signal line (line to earth)
EN 61000-4-5
Immunity to conducted disturbances
inductedbyradiofrequencyeld 0.15–80MHz, 10V EN 61000-4-6
7.4 Durability information
Backlight service life (LED type)
20000 hours or more (Time of continuous operation until
the brightness of the backlight reaches 50% of the rated
value when the surrounding air temperature is 25°C)
* see note
Front foil (without direct exposure to
sunlight or UV rays) 10 years if the surrounding air temperature is 25°C
UV resistance
Indoor applications: After 300 hours cycled humidity
in QUV accelerated weathering, some yellowing and
brittleness may be present.
Surface resistance
󰀨
butyl cellosolve, cyclohexanone, ethyl acetate, hexane,
isopropyl alcohol, mek, methylene chloride, toluene,
xylene
󰀨
󰀨
tea, tomato juice
Touchscreen reliability >1 million operations
* Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight
quality, reliability or durability.

Technical data common to all models
9ACGM0195V5EN Version 5.0
7.5 Viewing angles

vertical axis of the display. The viewing angles always refer to the standard mounting orientation.
For the viewing angle values (U, D ,L, R), refer to the technical data of the respective touch terminal
model.
U: From top
D: From bottom
L: From left
R: From right
HMe04 HMe07 HMe10
Horizontal viewing angle L/R: typ. 70° L/R: typ. 70°
L: typ. 60°
R: typ. 70°
Vertical viewing angle
U: typ. 70°
D: typ. 50°
U: typ. 50°
D: typ. 70°
U/D: typ. 70°

Technical data by model
10 ACGM0195V5EN Version 5.0
8. Technical data by model
HMe04 HMe07 HMe10
Display / Backlight TFT color / LED
Colors 64K
Resolution (pixel) 480 x 272 800 x 480 1024 x 600
Brightness 200cd/m² typ.
Display size (inch) 4.3” widescreen 7” widescreen 10.1” widescreen
Dimming yes
Flash memory 2GB 4GB 4GB
RAM 256MB DDR 512MB DDR 512MB DDR
Operating system Linux RT
CPU ARM Cortex-A8, 1GHz
Serial port 
Ethernet port 1x 10/100Mbit
USB port 1 host interface version 2.0, max. 500mA
Real-time clock yes
Voltage 24V DC (10–32V DC)
Current rating
(at 24V DC) 0.25A 0.30A 0.38A
Weight 0.4kg 0.6kg 1kg

Product dimensions
11ACGM0195V5EN Version 5.0
9. Product dimensions
9.1 HMe04
A B L H D T
136mm 96mm 147mm 107mm 29mm 5mm
Cutout
A
B
D T
H
L

Product dimensions
12 ACGM0195V5EN Version 5.0
9.2 HMe07
A B L H D T
176mm 136mm 187mm 147mm 29mm 5mm
Cutout
A
LD T
H
B

Product dimensions
13ACGM0195V5EN Version 5.0
9.3 HMe10
A B L H D T
271mm 186mm 282mm 197mm 29mm 6mm
Cutout
A
B
L
H
D T

Unpacking and packing instructions
14 ACGM0195V5EN Version 5.0
10. Unpacking and packing instructions
HMe04, HMe07
HMe10
To repack the product, please follow the instructions backwards.

Installation
15ACGM0195V5EN Version 5.0
11. Installation
11.1 Installation environment
The product is not intended for continuous exposure to direct sunlight. This might accelerate the aging

The product is not intended for installation in contact with corrosive chemical compounds. Check the

Do not use tools of any kind (screwdrivers, etc.) to operate the touchscreen of the product.

followed:
• 
• 
• The cutout for the panel must be of the dimensions indicated in this manual.
IP66 is guaranteed only if:
• 
• The thickness of the case where the product is mounted is from 1.5mm to 6mm.
• 
(1) Installation cutout
(1)

Installation
16 ACGM0195V5EN Version 5.0
11.2 Installation procedure
For details on installation, please refer to the “Installation Guide” provided with the product.

Notice

Tightening torque: 75Ncm

Connections
17ACGM0195V5EN Version 5.0
12. Connections
12.1 HMe04
(1) Serial port
(2) Ethernet port
(3) USB port
(4) Power supply
12.2 HMe07
(1) Serial port
(2) Ethernet port
(3) USB port
(4) Power supply
(4) (1) (3)
(2)
(4) (1) (3)(2)

Connections
18 ACGM0195V5EN Version 5.0
12.3 HMe10
(1) Serial port
(2) Ethernet port
(3) USB port
(4) Power supply
(4) (1) (3)(2)

Connections
19ACGM0195V5EN Version 5.0
12.4 Serial port
The serial port is used to communicate with the PLC or with another type of controller.
Standards available for the signals in the PLC port connector are: RS232, RS422, RS485. Use the
corresponding communication cable for the connection.
The serial port is software programmable. Make sure to select the appropriate interface in the
programming software.
RS232 RS422, RS485
Pin Description Serial port Pin Description
1 GND 1 GND
2 2
3 TX 3 CHA-
4 RX 4 CHB-
5 5
6 +5V output 6 +5V output
7 CTS 7 CHB+
8RTS 8 CHA+
9 9
For RS485, pins 4-3 and 8-7 must be
connected externally.
12.5 Ethernet port
The Ethernet port has two LED status indicators.
(1) Green LED
(2) Yellow LED
Green LED Yellow LED Description
ON OFF No LAN cable connected.
Flashes (link active) ON LAN cable connected with 100Mbit/s link
Flashes (link active) OFF LAN cable connected with 10Mbit/s link
(1) (2)

Connections
20 ACGM0195V5EN Version 5.0
12.6 Power supply, grounding, and shielding

DC power connector - AWG24 wire size - R/C terminal blocks (XCFR2), female pitch 5.08mm,
torque 4.5lb-in
3 conductors, minimum 1.5mm² wire diameter, minimum temperature conductor rating 105°C
NOTE
󰀩
The product must always be grounded to earth using a wire with a minimum diameter of 1.5mm².
󰀨
Earth connection must be done using either the screw or the faston terminal located near the power

power supply terminal block.



parallel with a 4.7nF capacitor. The power supply must have double or reinforced insulation. The

All the electronic devices in the control system must be properly grounded. Grounding must be
performed according to applicable regulations.