Panasonic HMX700 Series User manual

ACGM0197V4EN Version 4.0
2023.01 https://industry.panasonic.eu
Touch Terminals
HMx700 Series
Instruction Manual

2ACGM0197V4EN Version 4.0
Subject to change without notice.
The information contained in this manual is provided for informational purposes only. While e󰀨orts were made
to verify the accuracy of the information contained in this manual, it is provided “as is” without warranty of any
kind.
Third-party brands and names are the property of their respective owners.
This manual and everything described in it are copyrighted. You may not copy this manual, in whole or part,
without written consent of Panasonic.
Please direct support matters and technical questions to your local Panasonic representative.
Distributed by Panasonic Industry Europe GmbH
https://industry.panasonic.eu

3ACGM0197V4EN Version 4.0
Table of contents
1. Introduction ............................................................................................................................................... 4
2. Important symbols .................................................................................................................................... 4
3. Special instructions for use ..................................................................................................................... 5
4. Standards and approvals ......................................................................................................................... 5
5. Product overview ...................................................................................................................................... 6
6. Productidentication ............................................................................................................................... 6
7. Technical data common to all models..................................................................................................... 7
7.1 Hardware specications .................................................................................................................... 7
7.2 Environmental conditions .................................................................................................................. 7
7.3 Electromagnetic compatibility (EMC) ................................................................................................ 8
7.4 Durability information ........................................................................................................................ 8
7.5 Viewing angles ..................................................................................................................................9
8. Technical data by model......................................................................................................................... 10
8.1 HMx705, HMx707, HMx710 ............................................................................................................ 10
8.2 HMx715, HMx721 ........................................................................................................................... 11
9. Product dimensions................................................................................................................................ 12
9.1 HMx705...........................................................................................................................................12
9.2 HMx707, HMx710, HMx715, HMx721............................................................................................. 13
10. Unpacking and packing instructions .................................................................................................... 14
11. Installation ............................................................................................................................................... 15
11.1 Installation environment .................................................................................................................. 15
11.2 Installation procedure...................................................................................................................... 16
12. Connections............................................................................................................................................. 17
12.1 HMx705...........................................................................................................................................17
12.2 HMx707, HMx710, HMx715, HMx721............................................................................................. 18
12.3 Serial port........................................................................................................................................ 19
12.4 Ethernet port ................................................................................................................................... 19
12.5 Optional plug-ins ............................................................................................................................. 20
12.6 Power supply, grounding, and shielding.......................................................................................... 21
13. Battery ...................................................................................................................................................... 22
14. Getting started......................................................................................................................................... 23
15. Disposal ................................................................................................................................................... 23
16. Record of changes .................................................................................................................................. 24

Introduction
4ACGM0197V4EN Version 4.0
1. Introduction
This instruction manual contains information about the installation, transportation, storage, assembly,
use and maintenance of touch terminals of the HMx700 series.
The following models are available:
HMx705 Touch terminal with 5” TFT color widescreen, multi-touch capacitive touchscreen
HMx707 Touch terminal with 7” TFT color widescreen, multi-touch capacitive touchscreen
HMx710 Touch terminal with 10.1” TFT color widescreen, multi-touch capacitive touchscreen
HMx715 Touch terminal with 15.6” TFT color widescreen, multi-touch capacitive touchscreen
HMx721 Touch terminal with 21.5” TFT color widescreen, multi-touch capacitive touchscreen
2. Important symbols
One or more of the following symbols may be used in this documentation to indicate the type of
hazard.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in serious or moderate injury.
Notice
Indicates a property damage message.

Special instructions for use
5ACGM0197V4EN Version 4.0
3. Special instructions for use
• The product shall only be used in an area of not more than pollution degree 2, as dened in
IEC/EN 60664-1.
• The product shall be installed in an enclosure that provides a degree of protection not less than
IP54 in accordance with IEC/EN 60079-15.
• Transient protection shall be provided that is set at a level not exceeding 140% of the peak rated
voltage value at the supply terminals to the product.
• Install the product according to the accompanying installation instructions.
• Ground the product according to the accompanying installation instructions.
• Only qualied personnel may install or repair the product.
• Ensure that the ventilation holes are not covered.
• Care shall be taken to avoid that layers of dust form on the touch terminals in a way that might
cause the accumulation of static charges.
• Keep the faceplate of the product clean. The product must be cleaned only with a soft cloth and
neutral soap product. Do not use solvents.
• This product should not be used for purposes and methods other than indicated in this document
and in the documentation accompanying the product.
4. Standards and approvals
The products have been designed for use in an industrial environment in compliance with the
2014/30/EU EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 CISPR 22 Class A
CISPR 16-2-3
EN 61000-6-2 EN 61000-4-2 EN 61000-4-6
EN 61000-4-3 EN 61000-4-8
EN 61000-4-4 EN 61000-4-11
EN 61000-4-5 EN 61000-4-29
EN 60945
The installation of these products in residential, commercial and light-industrial environments is
allowed only in the case that special measures are taken in order to ensure conformity with
EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS)
Directive 2011/65/EU.
In compliance with the above regulations the products are CE marked.

Product overview
6ACGM0197V4EN Version 4.0
5. Product overview
The HMx700 series touch terminals combine state-of-the-art connectivity features and top
performance with an outstanding design.
The products have been designed as IoT edge devices. They combine a powerful controller with
networking capability (up to 3 Ethernet networks) and outstanding communication options including
client/ server OPC UA. They are the ideal choice for all demanding IoT edge applications including
factory, marine and building automation.
The glass projected capacitive touchscreen with a brilliant display up to 21.5” and a resolution
of 1920x1080 guarantees great optical performance. With the support of multi-touch gesture
programming the HMx700 series touch terminals can provide the most natural human interfaces.
The HMx700 series touch terminals have been designed to run the software HMWIN Studio for
powerful HMI applications.
• OPC UA server / client gateway
• Secure connectivity with Corvina Cloud and full network separation
• Powerful browser with industry standard web engines
• Optional plug-in modules
6. Productidentication
The product may be identied through a plate attached to the rear cover. You will have to know the
product type you are using for correct usage of the information contained in the manual.
The following information is provided by the plate:
• Product model name
• Product part number
• Year/week of production
• Version ID of the product
• Serial number

Technical data common to all models
7ACGM0197V4EN Version 4.0
7. Technical data common to all models
7.1 Hardwarespecications
Touchscreen technology Projected capacitive
Real-time clock back-up battery 3V, 50mAh lithium, rechargeable, not user-replaceable,
model VL2330
Fuse Automatic
Flash memory
4GB (HMx705, HMx707, HMx710)
8GB (HMx715, HMx721)
RAM
512MB (HMx705)
1GB (HMx707, HMx710)
2GB (HMx715, HMx721)
Real-time clock Clock/calendar with back-up battery
Accuracy real-time clock (at 25°C) <100ppm
7.2 Environmental conditions
Operating temperature
(surrounding air temperature)
-20 to +60°C (vertical installation)
Plug-in modules and USB devices may
limit max. temperature to +50°C
EN 60068-2-14
Storage temperature -20 to +70°C
EN 60068-2-1
EN 60068-2-2
EN 60068-2-14
Operating and storage humidity 5–85% RH non-condensing EN 60068-2-30
Vibrations
5–9Hz, 7mm p-p
9–150Hz, 1g
EN 60068-2-6
Shock ±50g, 11ms, 3 pulses per axis EN 60068-2-27
Degree of protection IP66 (front), IP20 (rear) EN 60529

Technical data common to all models
8ACGM0197V4EN Version 4.0
7.3 Electromagnetic compatibility (EMC)
Radiated disturbance test Class A
CISPR 22
CISPR 16-2-3
Electrostatic discharge immunity
test
8kV (air electrostatic discharge)
4kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio frequency,
electromagneticeldimmunitytest
80MHz–1GHz, 10V/m
1.4–2GHz, 3V/m
2–2.7GHz, 1V/m
EN 61000-4-3
Burst immunity test
±2kV DC power port
±1kV signal line
EN 61000-4-4
Surge immunity test
±0.5kV DC power port (line to earth)
±0.5kV DC power port (line to line)
±1kV signal line (line to earth)
EN 61000-4-5
Immunity to conducted disturbances
inductedbyradiofrequencyeld 0.15–80MHz, 10V EN 61000-4-6
Powerfrequencymagneticeld
immunity test Enclosure, 50/60Hz, 30A/m EN 61000-4-8
7.4 Durability information
Backlight service life (LED type)
40000 hours or more (Time of continuous operation until
the brightness of the backlight reaches 50% of the rated
value when the surrounding air temperature is 25°C)
* see note
Surface resistance
The HMx700 series front glass is resistant (no visible
changes) to the following chemicals and liquids after an
application time of 24 hours:
Betadine (10% povidone solution), Co󰀨ee, Cola, Dextrose
(5% glucose solution), Electrode gel/paste, Ethyl alcohol
(70–90%), Hydrogen chloride (0.5% solution pH=1),
Hydrogen peroxide (3% solution), Isopropyl alcohol,
NaCl (0.9% solution), Quaternary ammonium compound,
Sodium hypochlorite
* Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight
quality, reliability or durability.

Technical data common to all models
9ACGM0197V4EN Version 4.0
7.5 Viewing angles
The viewing angles for the horizontal (L, R) and vertical (U, D) axes are specied in reference to the
vertical axis of the display. The viewing angles always refer to the standard mounting orientation.
For the viewing angle values (U, D ,L, R), refer to the technical data of the respective touch terminal
model.
U: From top
D: From bottom
L: From left
R: From right
HMx705 HMx707 HMx710 HMx715 HMx721
Horizontal viewing
angle L/R: typ. 70° L/R: typ. 70° L/R: typ. 85° L/R: typ. 80° L/R: typ. 89°
Vertical viewing angle
U: typ. 50°
D: typ. 70°
U: typ. 50°
D: typ. 60°
U/D: typ. 85° U/D: typ. 75° U/D: typ. 89°

Technical data by model
10 ACGM0197V4EN Version 4.0
8. Technical data by model
8.1 HMx705, HMx707, HMx710
HMx705 HMx707 HMx710
Display / Backlight TFT color / LED
Colors 64K 16M
Resolution (pixel) 800 x 480 1280 x 800
Brightness 300cd/m² typ. 500cd/m² typ.
Display size (inch) 5” widescreen 7” widescreen 10.1” widescreen
Dimming yes (to 0%)
Flash memory 4GB
RAM 512MB 1GB
Operating system Linux RT
CPU ARM Cortex-A8, 1GHz ARM Cortex-A9 dual core, 800MHz
SD card slot yes
Serial port 1 (RS232, RS485, RS422 software congurable)
Ethernet port 2x 10/100Mbit
2x 10/100Mbit
1x 10/100/1000Mbit
USB port
1 host interface
version 2.0,
max. 500mA
2 host interfaces version 2.0, max. 500mA
Expansion slot 1 optional plug-in 2 optional plug-ins
Real-time clock yes
Voltage 24V DC (* see note)
Current rating
(at 24V DC) 0.6A 0.7A 1A
Weight 1kg 1.3kg 1.7kg
* 10–32V DC
For applications requiring compliance with EN 61131-2 and specically in reference to 10ms voltage dips
(according to EN 61000-4-29), the lower power supply voltage limit is 20.4V DC.

Technical data by model
11ACGM0197V4EN Version 4.0
8.2 HMx715, HMx721
HMx715 HMx721
Display / Backlight TFT color / LED
Colors 16M
Resolution (pixel) 1366 x 768 1920 x 1080
Brightness 400cd/m² typ. 300cd/m² typ.
Display size (inch) 15.6” widescreen 21.5” widescreen
Dimming yes (to 0%)
Flash memory 8GB
RAM 2GB
Operating system Linux RT
CPU ARM Cortex-A9 quad core, 800MHz
SD card slot yes
Serial port 1 (RS232, RS485, RS422 software congurable)
Ethernet port
2x 10/100Mbit
1x 10/100/1000Mbit
USB port 2 host interfaces version 2.0, max. 500mA
Expansion slot 2 optional plug-ins
Real-time clock yes
Voltage 24V DC (* see note)
Current rating
(at 24V DC) 1.2A 1.7A
Weight 4.1kg 6.1kg
* 10–32V DC
For applications requiring compliance with EN 61131-2 and specically in reference to 10ms voltage dips
(according to EN 61000-4-29), the lower power supply voltage limit is 20.4V DC.

Product dimensions
12 ACGM0197V4EN Version 4.0
9. Product dimensions
9.1 HMx705
A B C D E F
147mm 107mm 136mm 96mm 56mm 8mm
Cutout
A
B
C
D
EF

Product dimensions
13ACGM0197V4EN Version 4.0
9.2 HMx707, HMx710, HMx715, HMx721
Model A B C D E F
HMx707 187mm 147mm 176mm 136mm 47mm 8mm
HMx710 282mm 197mm 271mm 186mm 56mm 8mm
HMx715 422mm 267mm 411mm 256mm 56mm 8mm
HMx721 552mm 347mm 541mm 336mm 56mm 8mm
Cutout
A
B
C
D
EF

Unpacking and packing instructions
14 ACGM0197V4EN Version 4.0
10. Unpacking and packing instructions
HMx705, HMx707, HMx710
HMx715, HMx721
To repack the product, please follow the instructions backwards.
1 2 3
1 2

Installation
15ACGM0197V4EN Version 4.0
11. Installation
11.1 Installation environment
The product is not intended for continuous exposure to direct sunlight. There is a risk that the product
might be overheating.
The product is not intended for installation in contact with corrosive chemical compounds. Check the
resistance of the front panel lm to a specic compound before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touchscreen of the product.
In order to meet the front panel protection classications, proper installation procedure must be
followed:
• The borders of the cutout must be at.
• Each xing screw must be tightened until the plastic bezel corner gets in contact with the panel.
• The cutout for the panel must be of the dimensions indicated in this manual.
IP66 is guaranteed only if:
• The max. deviation from the plane surface to the cutout is ≤0.5mm.
• The thickness of the case where the product is mounted is from 1.5mm to 6mm.
• The max. surface roughness where the gasket is applied is ≤120μm.
(1) HMx700 series touch terminal
(2) Installation cutout
(1)
(2)

Installation
16 ACGM0197V4EN Version 4.0
11.2 Installation procedure
For details on installation, please refer to the “Installation Guide” provided with the product.
Place the xing brackets contained in the xing kit as shown in the following gure.
Notice
Make sure to screw each xing screw until the bezel corner gets in contact with the panel.
Tightening torque: 130Ncm

Connections
17ACGM0197V4EN Version 4.0
12. Connections
12.1 HMx705
(1) USB port (V2.0, max. 500mA, for maintenance only)
(2) Power supply
(3) Serial port
(4) Ethernet port 0 (10/100Mbit)
(5) Ethernet port 1 (10/100Mbit)
(6) Expansion slot for plug-ins
(7) SD card slot
(1) (2) (3) (6) (7)
(4) (5)

Connections
18 ACGM0197V4EN Version 4.0
12.2 HMx707, HMx710, HMx715, HMx721
(1) USB port (V2.0, max. 500mA, for maintenance only)
(2) Ethernet port 2 (10/100Mbit)
(3) Ethernet port 1 (10/100Mbit)
(4) Serial port
(5) Ethernet port 0 (10/100/1000Mbit)
(6) Power supply
(7) 2x expansion slot for plug-ins
(8) SD card slot
(2) (4) (6)
(1) (3) (5)
(8)
(7)

Connections
19ACGM0197V4EN Version 4.0
12.3 Serial port
The serial port is used to communicate with the PLC or with another type of controller.
Standards available for the signals in the PLC port connector are: RS232, RS422, RS485. Use the
corresponding communication cable for the connection.
The serial port is software programmable. Make sure to select the appropriate interface in the
programming software.
RS232 RS422, RS485
Pin Description Serial port Pin Description
1 RX 1 CHB-
2 TX 2 CHA-
3 CTS 3 CHB+
4RTS 4 CHA+
5 +5V output 5 +5V output
6 GND 6 GND
7 7
8 SHIELD 8 SHIELD
For RS485, pins 1-2 and 3-4 must be
connected externally.
12.4 Ethernet port
The Ethernet port has two LED status indicators.
(1) Yellow LED
ETH0:
ON: 1000Mbit link; OFF: 10/100Mbit
ETH1/2:
ON: 100Mbit; OFF: 10Mbit
For HMx705:
ON: 100Mbit; OFF: 10Mbit
(2) Green LED
ON: No activity
Flashes: Activity
1 8
(1) (2)

Connections
20 ACGM0197V4EN Version 4.0
12.5 Optional plug-ins
There are two optional plug-ins available for the HMx700 series. Depending on the touch terminal
type, there are one or two expansion slots.
Slot #2 and slot #4 are available only if the plug-in module is equipped with the bus extension
connector.
Module Application Max. No. of plug-ins Bus extension connector
PLCM03 Serial RS232 2 Yes
PLCM04 Serial RS485 2 Yes
If you are planning to use PLCM03 and PLCM04 (additional serial ports), the COM port numbers will
be assigned as follows:
• A module plugged in slot #1 or slot #2 will be COM2.
• A module plugged in slot #3 or slot #4 will be COM3.