Panasonic ET-RFV200 User manual

DPQX1297ZB/X1
Model No. ET-RFV200
ENGLISH
Operating Instructions
Replacement Filter Unit Commercial Use
Thank you for purchasing this Panasonic product.
■Please read these operating instructions and the projector operating
instructions carefully, and then use this product correctly.
■Please save this Operating Instructions for future use.

Notes on replacing the air filter unit
zTurno󰀨thepowerbeforeyoureplacetheairlterunit.
zWhenattachingtheairlterunit,makesurethattheprojectorisstable,andworkin
anenvironmentthatissafe,evenintheeventoftheairlterunitdropping.
zDonotoperatetheprojectorwiththelterremoved.Dustmayaccumulateonthe
opticalelementsdegradingpicturequality.
zDonotputanythingintotheairvents.Doingsomayresultinmalfunctionofthe
projector.
zTheairlterunittobereplacedshouldbeanunusedproduct.
Read this rst!
Replacing the unit
JReplacement of the air lter unit (side)
1) Remove the air lter cover.
zOpentheairltercoverinthedirectionofthe
arrowasthegureshowsandremoveit.
2) Remove the air lter unit.
i) Holdtheknoboftheairlterunitandpulloutit
inthedirectionofthearrow,thenthetopofthe
airlterunitwillpopup.
ii) Takeouttheairlterunitupwards.
zAfterremovingtheairlterunit,removelarge
foreignobjectsanddustfromtheairlter
compartmentandtheprojector’sairintakeport
if there are any.
3) Insert the new air lter unit.
zHoldtheairlterunitandmakesurethatthe
knobisoutsideoftheprojector,thenperform
Step 2) in the reverse order.
zDonotpressthelterpartwhenpushitintothe
projector at last.
4) Install the air lter cover.
zMakesurethattheairltercoverisclosed
tightly.
E-2
Theairlterunitsareprovidedinthesideandbackoftheprojector.
Air filter cover (side)
Air filter unit (side)
Knob

ENGLISH
E-3
JResetting the Filter Counter
BesuretoresettheFiltercounterafterreplacingtheairlterunit.
Afterreplacingtheairlter,resettheltercounter.Otherwise,thepoweroftheprojectormaybe
turnedo󰀨forsafety.
1) Turn on the projector, press the <MENU> button to display the main menu.
2) Press ▲▼ to select [Setting] and then press ► or the <ENTER> button to
access the sub-menu item.
3) Press ▲▼ to select [Filter counter] and then press ► or the <ENTER> button
to access the next item.
4) Press ▲▼ to select [Filter counter reset] and press the <ENTER> button.
z[FiltercounterReset?]appears.Select[Yes]tocontinue.Anotherconrmationdialogbox
appears, select [Yes] to reset the [Filter counter].
JReplacement of the air lter unit (back)
1) Remove the air lter cover.
zOpentheairltercoverinthedirectionofthe
arrowasthegureshowsandremoveit.
2) Remove the air lter unit.
zHoldtheknoboftheairlterunitandpulloutit
inthedirectionofthearrow.
zAfterremovingtheairlterunit,removelarge
foreignobjectsanddustfromtheairlter
compartmentandtheprojector’sairintakeport
if there are any.
3) Insert the new air lter unit.
zHoldtheairlterunitandmakesurethatthe
knobisoutsideoftheprojector,thenperform
Step 2) in the reverse order.
zDonotpressthelterpartwhenpushitintothe
projector at last.
4) Install the air lter cover.
zMakesurethattheairltercoverisclosed
tightly.
Air filtercover(back)
Airfilterunit(back)
Knob

Panasonic Connect Co., Ltd.
WebSite:https://panasonic.net/cns/projector/
© Panasonic Connect Co., Ltd. 2022
TI0512JZ2062 -PT
Printed in China
JDisposal
When discarding this product, please contact your local authorities or dealer and ask for
thecorrectmethodofdisposal.