Panasonic ET-RFE200C User manual

Model No. ET-RFE200C
ENGLISH
Operating Instructions
Replacement lter unit Commercial Use
TQZJ631-1
Thank you for purchasing this Panasonic product.
■
Before using this product, please read the instructions carefully, and
save this manual for future use.

Notes on replacing the air filter unit
zTurn off the power before you replace the air lter unit.
zWhen attaching the air lter unit, make sure that the projector is stable, and work in
an environment that is safe, even in the event of the air lter unit dropping.
zDo not operate the projector with the lter removed. Dust may accumulate on the
optical elements degrading picture quality.
zDo not put anything into the air vents. Doing so may result in malfunction of the
projector.
zThe air lter unit to be replaced should be an unused product.
Read this rst!
E-2
JReplacement of the air lter unit
1) Turn off the projector, and unplug the AC
power cord from the AC outlet.
2) Clean up the dust on the projector and
around the vent.
3) Press ▼ downwards on the lter cover to
release the latch and open the lter cover.
Replacing the unit
JAir lter unit
Filter prevents dust from accumulating on the optical elements inside the projector.
Should the lter become clogged with dust particles, it will reduce cooling fans’
effectiveness and may result in internal heat buildup and adversely affect the life of the
projector.
If <FILTER> indicator lights orange, replace the lter immediately.
Filter cover
[OPEN▼▲LOCK]

ENGLISH
E-3
JResetting the Filter Counter
Be sure to reset the Filter counter after replacing the air lter unit.
After replacing the air lter, reset the lter counter. Otherwise, the power of the projector
may be turned off for safety.
1) Turn on the projector, press the <MENU> button to display the main menu.
2) Press ▲▼ to select [Setting] and then press ► or the <ENTER> button to access
the sub-menu item.
3) Press ▲▼ to select [Filter counter] and then press ► or the <ENTER> button to
access the next item.
4) Press ▲▼ to select [Filter counter reset] and press the <ENTER> button.
5) [Filter counter Reset?] appears. Select [Yes] to continue.
6) Another conrmation dialog box appears, select [Yes] to reset the [Filter counter].
Air filter unitTab
4) Pull out the air lter unit.
zPick the tab and frame of the air lter
unit, release the lock with pressing the
tab rightwards in the gure, and then
pull.
5) Put the new one back into the posi-
tion.
z
Hold the air lter unit that the tab is in left
side in the gure, put the right side in the
gure rst, and press the tab side until
make a click sound.
6) Close and press up to lock the lter
cover.
zMake sure that the air lter cover is
closed tightly.
7) Connect the AC power cord to the AC
outlet and turn on the projector.

松下电器 （中国）有限公司
北京市朝阳区景华南街 5 号远洋光华中心 C 座3 层、6 层
网站：https://panasonic.cn
原产地 ：中国
发行 ：2022 年6月
© 松下互联株式会社 2022 版权所有 TI0612ZF2062 -PT
Printed in China