Panasonic ET-RFV300 User manual

TQZJ583-2
Model No. ET-RFV300
Operating Instructions
Replacement Filter Unit Commercial Use
Thank you for purchasing this Panasonic product.
■Please read these operating instructions and the projector operating in-
structions carefully, and then use this product correctly.
■Please save this Operating Instructions for future use.

2 - ENGLISH
Attention
zTurno󰀨thepoweranddisconnectthepowerplugfromthewalloutletbeforeyoureplacetheair
lterunit.
zWhenattachingtheairlterunit,makesurethattheprojectorisstable,andworkinan
environmentthatissafe,evenintheeventoftheairlterunitdropping.
zDonotputanythingintotheairvents.Doingsomayresultinmalfunctionoftheprojector.
Illustrations in these operating instructions
zIllustrationscontainedintheseoperatinginstructionsthatshowtheprojectormaydi󰀨erfromthe
actualobjectstheydepict.
J
JJReplacement procedure
1) Turn o󰀨 the Power and then remove the AC power plug from the wall outlet.
zWhenthepoweristobeturnedo󰀨,beabsolutelysuretofollowtheproceduredescribedin
“PoweringO󰀨theProjector”intheoperatinginstructionsoftheprojector.
2) Remove the air lter cover.
zOpentheairltercoverinthedirectionofthearrowasthegureshowsandremoveit.
3) Remove the air lter unit.
zHoldthetaboftheairlterunitandpulloutitinthedirectionofthearrow.
zAfterremovingtheairlterunit,removeforeignobjectsanddustfromtheairlter
compartmentandtheprojector’sairintakeportifthereareany.
Air filter cover
Replacing the air lter unit
Tab
Air filter unit

ENGLISH - 3
Replacing the air lter unit (continued)
4) Attach the unused air lter unit (Replacement Filter Unit) to the projector.
zHoldtheairlterunitthatthetabisinleftsideinthegure,puttherightsideinthegure
rst,andpressthetabsideuntilmakeaclicksound.
zDonotpressanyotherpartoftheairlterunitexcepttheframeduringinstallation.
5) Attach the air lter cover.
zPerformStep2)inthereverseorder.
zMakesurethattheairltercoverisclosedtightly.J
Attention
zMakesurethattheairlterunitisproperlyattachedbeforeusingtheprojector.Ifitisnot
attached,theprojectorwillsuckindirtanddustcausingamalfunction.
zAfterreplacingtheairlter,resettheltercounter.Otherwise,“FILTERCOUNTERhasreached
thesettime.”willappearonscreen.
zAfterunpackingthelampunit,discardthepackagingmaterialproperly.
zDonotdisassembletheairlterunit.
JResetting the Filter Counter
BesuretoresettheFiltercounterafterreplacingtheairlterunit.
1) Connect the power plug, press the power button on the control panel or the on
the remote control.
2) Press the <MENU> button to display the main menu, then press as to select
[PROJECTOR SETUP].
3) Press the <ENTER> button, then press as to select [FILTER COUNTER].
4) Press the <ENTER> button, then press as to select [FILTER COUNTER RESET].
5) Press the <ENTER> button.
z[FILTERCOUNTERRESET]conrmationisdisplayed.
6) Press qw to select [OK], then press the <ENTER> button.
zThelterusagetimeis0afterreset.
Note
zThefrequencywithwhichtheairlterunitneedstobechangeddependssignicantlyonthe
environmentwheretheprojectorisused.
Tab

WebSite :https://panasonic.net/cns/projector/
Panasonic Connect Co., Ltd.
© Panasonic Connect Co., Ltd. 2022 TI1013JZ2062 -PT
PrintedinChina
JDisposal
When discarding this product, please contact your local authorities or dealer and ask for
thecorrectmethodofdisposal.