Panduit CJS588T User manual

INSTALLATION INSTRUCTIONS PN347
© Panduit Corp. 2004
For Technical Support: www.panduit.com/resources/install_maintain.asp
Individual Foil
Conductors
Braid
STP / PIMF
Pair Screen
.5 in
(12.7 mm)
2.0 in
(50.8 mm)
GIGA-TX Shielded Jack Modules
Part Numbers: CJS588T, CJS5E88T
Page 1 of 3
CABLE PREPARATION
2.0 in
(50.8 mm)
Drain wire
Drain wire
Overall Foil
Conductors
Drain wire
FTP / ScTP
Screen
Conductors
Braid
S-FTP
Overall Foil
Screen
.5 in
(12.7 mm)
2.0 in
(50.8 mm)
TERMINATION
1T568A
GREEN
1. ORANGE
WHITE/GREEN WHITE/ORANGE
T568B
ORANGE
2. GREEN
WHITE/ORANGE WHITE/GREEN
BLUE
3. BLUE
WHITE/BLUE WHITE/BLUE
BROWN
4. BROWN
WHITE/BROWN WHITE/BROWN
1.
2.
3.
4.
1234
2
Note: May also use S-STP / PIMF cable type (conductors, individual foil pair screen, overall foil screen, and braid).

INSTALLATION INSTRUCTIONS PN347
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 3
2
3 1
4
3T568A
BROWN
1. BROWN
T568B
WHITE/BROWN
2. WHITE/BROWN
WHITE/GREEN
3. WHITE/ORANGE
GREEN
4. ORANGE
1.
2.
3.
4.
8
6
57
T568A
ORANGE
5. GREEN
T568B
WHITE/ORANGE
6. WHITE/GREEN
WHITE/BLUE
7. WHITE/BLUE
BLUE
8. BLUE
5.
6.
7.
8.
4
9
10
5T568A
ORANGE
9.
T568B
WHITE/BLUE
10.
GREEN
9.
WHITE/BLUE
10.
6
CWST
7
SHIELD INSTALLATION
1 2 3 4
8
CGJT (OR)

INSTALLATION INSTRUCTIONS PN347
E-mail:
[e-mail]
Fax:
[phone]
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp www.panduit.com
Page 3 of 3
TERMINATION CAP REMOVAL
Notes:
1. For specified performance, follow TIA/EIA 568-B installation guidelines.
2. Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or
stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated
conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 10 times.
4. For technical and performance information, consult PANDUIT Technical
Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is
specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the
communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
8
7
6
5
4
3
2
1
7 8
4 6
5 3
2 1
Brown
White/Brown
Orange
White/Blue
Blue
White/Orange
Green
White/Green
BOTTOM
TOP
8
7
6
5
4
3
2
1
Brown
White/Brown
Green
White/Blue
Blue
White/Green
Orange
White/Orange
BOTTOM
TOP
7 8
4 6
5 3
2 1
T568-A
GIGA-TX Wiring Sequences
T568-B
18
Pin #’s
1 2 3
TELECOMMUNICATION ROOM SHIELDING CONTINUITY
2
3
1
Drain wire
FTP / ScTP
All Metal Patch
Panel Shielding
(OR)
CJSGK-X Kit
2
3
1
S-FTP, STP / PIMF,
S-STP / PIMF All Metal Patch
Panel Shielding
(OR)
CJSGK-X Kit