Panduit PN366E User manual

TX6 10GIG Shielded Jack Module
Page 1 of 2
INSTALLATION INSTRUCTIONS PN366E
©Panduit Corp. 2007
For Technical Support: www.panduit.com/resources/install_maintain.asp
Part Number: CJS6X88TG, CJS6X88TGY
.5 in
(12.7 mm)
2.0 in
(50.8 mm)
CWST
Braid
Conductors
Individual Foil
Pair Screen
S-STP / PIMF
Cable
End 1 Cable
End 2
3
1
2
2
""
""
4
Cable End 1 Cable End 2 6
Pr1
Pr2
Pr3
Pr4
Pr4
Pr1
Pr2
Pr3
TERMINATION STEPS
5
1
0
.
5
"
(12.7mm)
Jack
Wire Cap
Strain
Relief
Collar
U/FTP
Drain Wire
Conductors
Individual Foil
Pair Screen
2.0 in
(50.8mm)
CWST
Drain
Wire

Page 2 of 2
INSTALLATION INSTRUCTIONS PN366E
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Fax:
[phone]
www.panduit.com
Cable End 1
Cable End 2
Cable End 1
Cable End 2
7
T568B T568A
AB
AB
AB
12
1
3
1
2
3
1
2
3
See note 4.
2
CWST
8
9
EGJT
10
11
CJSGK-X
KIT
12
REMOVAL STEPS
3
Notes:
1. For specified performance, follow TIA/EIA 568-B installation guidelines.
2. Jack Modules can terminate PVC or LSZH rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm)
maximum insulated conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 20 times.
4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper
location.
5. CJSGK-X Grounding Kit is REQUIRED for all MINI-COM Modular Patch Panels, but is optional for MINI-COM All Metal Shielded Modular Patch Panels.
6. For technical and performance information, consult PANDUIT Technical Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
See note 5
12
Drain Wire
U/FTP