Panduit Opti-Core User manual

Opti-Core
®
Push-Pull LC Duplex
Fiber Optic Patch Cords SPECIFICATION SHEET
construction
Fiber count: Duplex (2-fiber) jacketed zipcord
Cable jacket
ratings:
Riser (OFNR)
Low Smoke Zero Halogen
(LSZH) per: IEC 60332-1-2,
IEC 60332-3-24, IEC 60754-1,
IEC 60754-2, IEC 61034-2
Fiber types: Singlemode: OS1/OS2 9/125µm
Multimode: OM3 50/125µm
OM4 50/125µm
Connector types,
End ‘A’: Duplex LC
Connector types,
End ‘B’: Duplex LC
Jacket color: OS1/OS2: Yellow
OM3: Aqua
OM4: Aqua
application
Provide interconnect and cross-connect of applications in entrance facilities, telecommunication rooms, data centers, at the
desk and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and
equipment distribution areas.
technical information
Push-Pull LC Duplex Fiber Optic Patch Cords containing the custom push-pull strain
relief boot and duplex clip, allow users easy accessibility when deploying very high
density LC patch fields in data center applications. Available in riser (OFNR), and low
smoke zero halogen (LSZH) rated jacket materials to comply with local cabling
ordinances and OM4, OM3 or OS1/OS2 fiber types to meet the demands of today's
highest speed applications.
physical properties
Cable outside diameter (OD): 1.6mm duplex
Bend Radius (min) Short-Term: 16mm
Bend Radius (min) Long-Term: 32mm
Connector cable retention: 50N (4.24lb) @ 0°
19.4N (4.4lb)@ 90°
Connector durability: 500 cycles
environmental properties
Storage and
wshipping temperature:
-40°C to 70°C
Operating and
installation temperature:
-10°C to 60°C
www.panduit.com
optical properties
Connector
insertion loss:
Standard: 0.25dB max (OM3 and OM4)
0.35dB max (OS2)
Optimized: 0.15dB max (OM3 and OM4)
Ultra: 0.10dB max (OM4)
Connector
return loss:
26dB min (OM3 and OM4)
55dB min (OS1/OS2) standards
Meets or exceeds ISO/IEC 11801, TIA-568-C.3,
TIA-604-10 (FOCIS-10)
Restriction of Hazardous
Substances (RoHS) Compliance:
All patch cord
components meet
the requirement
of Directive
2002/95/EC

Opti-Core
®
Push-Pull LC Duplex Fiber Optic Patch Cords
12 3 4 5 6 15
FX 2 E R Q 5
1 – Fiber Product
F = Fiber
2 – Fiber Type
X = OM3 50/125µm
Z = OM4 50/125µm
9 = OS1/OS2 9/125µm
3 – Fiber Count
2 = 2-fiber
4 – Cable Type
E = 1.6mm
5 – Jacket Type
L = LSZH (Low Smoke Zero Halogen)
R = OFNR (Riser)
6 – Connector Type
Q = LC Push-Pull connector
7 – Connector Variant
1 = 1st Gen (Low Profile Duplex LC)
8 – Connector Type
Q = LC Push-Pull connector
9 – Connector Variant
1 = 1st Gen (Low Profile Duplex LC)
10 – Performance/Construction
S = Standard IL/Straight Through
(A-B)
O = Optimized IL/Straight Through
(A-B)
N = Ultra IL/Straight Through (A-B)
11 – Connector Variant
N = No variant
12 – Unit of Length
M = Meters
F = Feet
13, 14, 15 – Length
001 - 050 in 1 meter increments
1/2 meter increments available
between 1 and 10 meters, ex 3.5
Foot-length increments available
from 1 to 25 feet in Riser-rated
jacket only
Character
Example
part number configurator
Example: FX2ERQ1Q1SNM005 = Fiber, OM3, 2-ber, 1.6mm cable, riser rated, LC push-pull connector to LC push-pull connector, standard IL,
5 meters
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP90--WW-ENG
2/2015
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: [phone]
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: [phone]
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: [phone]
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: [phone]
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: [phone]
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: [phone]
Contact Customer Service by email: [email protected]
or by phone: [phone]
Visit us at www.panduit.com
For more information
polarity changeover
7
1
8
Q
9
1
10
S
11
N
Other options are available as follows; contact Panduit for part number.
Fiber type: OM4+ Signature Core™
Performance/Construction: Optimized IL – Straight Through (A-B), Optimized IL – Flipped (A-A),
Standard IL – Flipped (A-A)
12
M
13
0
14
0
A
B
Duplex clip
12
Squeeze both sides of the
boot. Squeezing sides lifts
boot over retaining feature.
3
Carefully slide boot
backward while still
squeezing sides.
Remove both connectors from duplex clip
and switch positions of A/B. Only perform
this change on one end of the patch cord.
Retaining
feature