Paradox K32LCD+ User manual

K32LCD+-EQ00
Printed in Canada - 05/2014 PARADOX.COM
Quick Start
K32LCD+ Keypad
How To Arm
Arming When Exiting (Regular Arm)
To arm your system when exiting:
Note: To arm with StayD enabled, refer to the
StayD user manual, available at paradox.com. To
learn more about StayD, contact your installer.
Arming When Staying (Stay/Sleep Arm)
To arm your system when staying:
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
AC light (ON = power ON;
OFF = power OFF)
StayD light (ON = StayD ON;
OFF= StayD Off
Chime programming
(press and hold)
Backlight settings
(press and hold)
Quick Menu Programming
(press once + [MASTER CODE]
Step Description
1. Close all zones in the desired partition.
2. Press [ARM] and enter your [ACCESS
CODE].
Step Description
1. Press [STAY] for stay arming or [SLEEP]
for sleep arming and then enter your
[ACCESS CODE].
2. Select the desired partition (1 or 2). For
both, press one, then the other after the
beep.
www.ealarm.com.my

How to Disarm
To disarm your system when entering:
Panic Keys
To send a silent or audible alarm to your security
company, press and hold one of the key
combinations listed below, for two seconds.
Alarm Memory Display
To view the alarms that occurred during the last
armed period:
Trouble Display
The LCD screen will display all troubles when they
occur. To view and clear troubles:
How to Bypass Zones
When a zone is bypassed, it remains unarmed when
the corresponding area is armed. To bypass zones:
Step Description
1. Press [OFF] and enter your [ACCESS
CODE].
2. Select the desired partition (1 or 2). For
both, press one, then the other after the
beep.
Panic Alarm Key Combinations
Police Keys [1] & [3]
Medical Keys [4] & [6]
Fire Keys [7] & [9]
Step Description
1. Disarm the system.
2. Press [MEM]. All zones that were
breached during the last armed period
will be displayed. Use the arrow keys to
view the zones.
3. Press [ENTER] to save and exit.
Step Description
1. Press [TBL].
2. Scroll through the list of troubles using
the arrow keys. Refer to the MGSP User
Guide for trouble descriptions and
instructions.
3. Perform the recommended repair
instructions to clear the trouble. If no
instructions are given, contact your
security company.
4. Press [CLEAR] to exit.
Step Description
1. Press [BYP].
2. Enter your [ACCESS CODE].
3. Select the zone you want to bypass by
entering the zone number, e.g., zone
3=03.
4. Press [Enter].
© 2014 Paradox Ltd. All rights reserved.
Specifications may change without prior notice.
For complete patent, trademark, certification,
and warranty information, please visit www.paradox.com.
www.ealarm.com.my