Pari LC Sprint User manual

Disconnect the power plug.Switch off device.
Disconnect the nebuliser
chamber from the tubing.
Switch the device back on
to dry the tubing.
Breathe in slowly and deeply. If your nebuliser is
fitted with PIF Control, you will feel a resistance when
breathing in too quickly. If you notice this, pause for a
moment, then try to inhale more slowly.
When a different noise comes from the nebuliser cham-
ber (it will change from a smooth hissing to a crackling
noise), this indicates that nebulisation has finished.
For infants, ensure that
the nebuliser is upright.
Gently press the mask
against the face so that
it fits snugly.
Sit upright in a relaxed position and switch on the
device. Take the mouthpiece between your teeth and
close your lips around it.
OR
Open the nebuliser cap.
Pour in the inhalation
solution. Close the nebu-
liser cap.
Connect the nebuliser
and compressor with
the connection tubing.
Connect the compressor
to the mains power
supply.
If using a baby mask it
must only be used in
conjunction with the
baby bend. Adjust the
alignment of the bend and
position the mask accord-
ing to the position of the
baby or infant.
Attach the mouthpiece or
the mask to the nebuliser.
Wash your hands
thoroughly before each
session.
User Guide:
Nebulising with the PARI LC SPRINT®
12a 2b 3
45a
6 7 8
5b

023D0090-A-2020-08
PARI GmbH Spezialisten für effektive Inhalation, Moosstraße 3, 82319 Starnberg, GERMANY
e-mail: [e-mail], phone: [phone], fax: [phone], www.pari.com
Please ensure you read the Instructions For Use that come with the nebuliser and compressor, which give a more
detailed description than this short guide. The instruction manual is included in the device package. If lost you can
download the manual at www.pari.com or request it by calling 01932-341122.
PARI Medical Ltd,
Unit 8 Oyster Park, 109 Chertsey Road,
Byfleet, West Byfleet, Surrey KT14 7AX
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.pari.com
Air filter, nebuliser and connection tubing should be replaced every year.
These components are included in the PARI Year Pack.
Components may have to be replaced sooner if they are damaged or
if contamination cannot be removed.
Store all components in a dry,
dust-free place.
After every cleaning and/or disinfec-
tion, place the parts on a dry, clean,
absorbent surface and allow to dry
completely before use.
Disinfect the nebuliser once a day
for 5 minutes in boiling water or
for at least 6 minutes in a standard
commercial disinfector, such as one
designed for baby bottles.
Disassemble the nebuliser after each
use and wash all individual parts
in warm water with dishwashing
liquid, before rinsing thoroughly in
running water.
User Guide:
Nebulising with the PARI LC SPRINT®
Scan code with your
mobile phone camera
to view video
1 2 3
54