Parkside PTSA 12 A1 User manual

CORDLESS LED WORK LIGHT 12V
AKKU-LED-ARBEITSLICHT 12 V
BALADEUSE LED SANS FIL 12 V
PTSA 12 A1
BALADEUSE LED SANS FIL 12 V
Traduction des instructions d’origine
AKKU-LED-ARBEITSLICHT 12 V
Originalbetriebsanleitung
CORDLESS LED WORK LIGHT
12V
Translation of the original instructions
AKU PRACOVNÍ LED SVÍTILNA
NAPĚTÍ 12 V
Překlad originálního provozního návodu
ACCU-LED-WERKLAMP 12 V
Vertaling van de originele gebruiksaanwijzing
AKU LED PRACOVNÉ SVETLO
12 V
Preklad originálneho návodu na obsluhu
AKUMULATOROWA LAMPA
ROBOCZA LED 12 V
Tłumaczenie oryginalnej instrukcji obsługi
LUZ DE TRABAJO LED
RECARGABLE 12 V
Traducción del manual de instrucciones original
BATTERIDREVEN LED
ARBEJDSLAMPE 12 V
Oversættelse af den originale driftsvejledning
LAMPADA LED RICARICABILE
DA LAVORO 12 V
Traduzione delle istruzioni d’uso originali
AKKUS LED-MUNKALÁMPA
12 V
Az originál használati utasítás fordítása
DELOVNA LED-SVETILKA
S POLNILNO BATERIJO 12 V
Prevod originalnega navodila za uporabo
IAN 405829_2201

GB/ IE Translation of the original instructions Page 1
DE/AT/CH Originalbetriebsanleitung Seite 21
FR/BE Traduction des instructions d’origine Page 41
NL/BE Vertaling van de originele gebruiksaanwijzing Pagina 65
CZ Překlad originálního provozního návodu Strana 85
PL Tłumaczenie oryginalnej instrukcji obsługi Strona 105
SK Preklad originálneho návodu na obsluhu Strana 125
ES Traducción del manual de instrucciones original Página 145
DK Oversættelse af den originale driftsvejledning Side 165
IT Traduzione delle istruzioni d’uso originali Pagina 185
HU Az originál használati utasítás fordítása Oldal 205
SI Prevod originalnega navodila za uporabo Stran 225

All Parkside tools and the chargers
PLGK12A1/A2/A3/B2/PDSLG 12 A1
of the X12V Team series are compatible
with the PAPK12A1/A2/A3/B1/B3/
C1/D1 battery pack.
Alle Parkside Geräte und die Ladegeräte
PLGK12A1/A2/A3/B2/PDSLG12A1
der X12V Team Serie sind mit dem
Akku-Pack PAPK12A1/A2/A3/
B1/B3/C1/D1 kompatibel.
Tous les outils Parkside et les chargeurs
PLGK12A1/A2/A3/B2/PDSLG 12 A1 de
la série X12V Team sont compatibles
avec la batterie PAPK12A1/A2/A3/
B1/B3/C1/D1.
Charging times
Ladezeiten
Temps de charge
Charging currents
Ladeströme
Courants de charge
max. 2,4 A · PLGK 12 A1/A2/A3
Charger · Ladegerät · Chargeur
max. 4,5 A
· PLGK 12 B2
Charger · Ladegerät · Chargeur
max. 4,5 A · PDSLG 12 A1
Charger · Ladegerät · Chargeur

12 V max.
10,8 V
2 Ah
Battery pack
Batterie
Batterie
PAPK 12 A1
2 Ah
Battery pack
Batterie
Batterie
PAPK 12 A2/A3
2,5 Ah
Battery pack
Batterie
Batterie
PAPK 12 C1
4 Ah
Battery pack
Batterie
Batterie
PAPK 12 B1/B3
5 Ah
Battery pack
Batterie
Batterie
PAPK 12 D1
60 min
2,4 A
60 min
2,4 A
80 min
2,4 A
120 min
2,4 A
150 min
2,4 A
60 min
2,4 A
45 min
3,5 A
55 min
3,8 A
60 min
4,5 A
80 min
4,5 A
60 min
2,4 A
45 min
3,5 A
55 min
3,8 A
60 min
4,5 A
80 min
4,5 A

GB│IE │ 1 ■PTSA 12 A1
Contents
Introduction........................................ 2
Intended use.................................................2
Equipment...................................................2
Package contents .............................................3
Technical specifications ........................................3
General power tool safety warnings ................... 4
1. Work area safety...........................................4
2.Electricalsafety............................................5
3. Personal safety.............................................5
4. Power tool use and care .....................................6
5. Use and handling of the cordless electrical power tool..............7
6.Service...................................................8
Safety instructions for battery chargers ............................8
Safety instructions for torches.................................. 10
Before use ........................................10
Removing/charging/inserting the battery pack .................... 10
Using the appliance ................................11
Switching on/off............................................ 11
Batterychargelevel......................................... 11
Maintenance and cleaning...........................12
Disposal..........................................12
Kompernaß Handels GmbH warranty .................14
Service...........................................17
Importer .........................................17
Translation of the original Conformity Declaration.......18
Ordering replacement batteries ......................20
Telephone ordering ......................................... 20

■ 2 │ GB│IE PTSA 12 A1
CORDLESS LED WORK LIGHT 12V PTSA 12 A1
Introduction
Congratulations on the purchase of your new appliance. You have
selected a high-quality product. The operating instructions are part
of this product. They contain important information about safety,
usage and disposal. Before using the product, please familiarise yourself with
all operating and safety instructions. Use the product only as described and
for the specified range of applications. Please also pass these operating
instructions on to any future owner.
Intended use
This torch is intended for lighting up dry, poorly lit indoor areas, such as
garages, cellars or attics.
The torch is not suitable for lighting rooms in houses. Any other use or
modification of the torch is considered improper and involves a considerable
risk of personal injury.
The manufacturer accepts no responsibility for damage(s) attributable
to misuse. This appliance is not intended for commercial use. This light is
intended for normal operation.
Equipment
1Battery display LED
2On/Off switch
3Battery pack*
4Release buttons
5Control LED
6Battery charge level indicator LED
7High-speed battery charger*

GB│IE │ 3 ■PTSA 12 A1
Package contents
1 cordless LED work light 12V
1 set of operating instructions
Technical specifications
Cordless LED Work Light 12V PTSA 12 A1
Rated voltage 12 V (DC)
Rated power Pmax 1 W
Number of LEDs 1
Luminous flux max. 120 lm
Brightness levels 1
Protection class III/ (protection through extra-low voltage)
Protection category IP20: Protection against ingress of solid foreign
objects with a diameter of > 12.5mm, no protection
against water.
Rechargeable battery PAPK 12 A2*
Type
LITHIUM ION
Rated voltage 12 V (DC)
Capacity 2000mAh/24Wh
Cells 3
High-speed battery charger PLGK 12 A1*
INPUT
Rated voltage 220–240 V ∼, (AC), 50–60 Hz
Power consumption 50 W
Fuse (internal) 2 A T2A

■ 4 │ GB│IE PTSA 12 A1
OUTPUT
Rated voltage 12 V (DC)
Rated current 2.4 A
Charging time approx. 60 min
Protection class II/ (double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
General power tool safety warnings
WARNING!
► Read all safety warnings and all instructions. Failure to follow the warn-
ings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to mains-operated (with power
cord/mains adapter) power tools or battery-operated (cordless) power tools.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control of the appliance.

GB│IE │ 5 ■PTSA 12 A1
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inat-
tention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Pro-
tective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.