Parrot BEBOP 2 FPV Pack User manual

QUICK START GUIDE
GUIDE D’UTILISATION RAPIDE
GUÍA DE UTILIZACIÓN RÁPIDA
SCHNELLSTART-ANLEITUNG
GUIDA DI RIFERIMENTO RAPIDO
BEKNOPTE GEBRUIKSHANDLEIDING
GUIA DE UTILIZAÇÃO RÁPIDA

B
A

English.......................................5
Français .................................. 26
Español................................... 47
Deutsch .................................. 68
Italiano ................................... 89
Nederlands........................... 109
Português............................. 129
............................... 149

5
ENGLISH
PRESENTATION
OF THE PARROT BEBOP 2
On/Off
button
Micro-USB port
Camera
Battery

6
PRESENTATION
OF THE PARROT
SKYCONTROLLER 2
BA
Antenna
Location
of the
smartphone
and tablet
holder
On/Off
button
Return
home
Take off/
Land
During flight: start/stop video
recording
Settings: return
During flight:
take a photo
Settings: Confirm
Settings

7
ENGLISH
Set the camera
exposure
Change the display mode
on the application
Switch to direct view
or immersive view
Vertical orientation
of the camera
USB port

8
PRESENTATION OF
PARROT COCKPITGLASSES
Drawer for
smartphone
Parrot Cockpitglasses are used with the Parrot Skycontroller
or the Parrot Skycontroller 2.
Parrot Cockpitglasses are compatible with the following phones:
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• LG G4
• LG G3
• HTC One M8
• Samsung Galaxy S®7
• Samsung Galaxy S®6
• Samsung Galaxy S®5
• Samsung Galaxy Note®5
• Samsung Galaxy Note®4
• Samsung Galaxy Note®3
• Nexus 5
Never leave Parrot Cockpitglasses in the sun when
not in use. This could damage your phone.

9
ENGLISH
BEFORE GETTING
STARTED
Before use, refer to the Battery section in the General
Information category.
CHARGING THE PARROT
BEBOP 2’S BATTERY
1. Select the adapter (supplied) corresponding to your
country and connect it to the charger.
2. Connect the charging cable (supplied) to the charger.
3. Connect the battery to the charging cable and plug
the charger into an available power outlet.
The indicator light is red during charging and then turns
green when the battery is charged. The battery charging
time is about 55 minutes. Flight time is approximately
25 minutes.
CHARGING THE PARROT
SKYCONTROLLER 2’S BATTERY
1. Select the adapter for your country and attach it to
the charger.
2. Connect the Parrot Skycontroller 2 to the charger,
and then plug the charger into the mains. The charge
time is approximately 1 hour 40 minutes for 4 hours
of use.

10
INSTALLING THE PROPELLERS
Install, then lock the propellers onto the motors of the
Bebop 2 as indicated in (diagram 1) using the supplied
propeller mounting tool (diagram 2). Please note that
the propellers are not interchangeable, and must be
installed correctly before operation.
1
2

11
ENGLISH
INSTALLING THE PROPELLERS
Slide the battery of the Bebop 2 forward until your hear
click. The latch at the rear of the battery must be locked
in the lower position (diagram 3).
3
DOWNLOAD THE FREEFLIGHT PRO
APPLICATION
Login to the App Store®or Google PlayTM and download
the free FreeFlight Pro application to your smartphone
or tablet.

12
CONNECTING TO THE
PARROT BEBOP 2
CONNECT THE PARROT
SKYCONTROLLER 2 TO YOUR
PARROT BEBOP 2
1. Place the Parrot Bebop 2 on a flat surface.
2. Turn on your Parrot Bebop 2.
3. Press the Parrot Skycontroller 2’s On/Off button to
turn it on.
4. Wait until the warning light is a steady green.
>You are connected to the Parrot Bebop 2, and you
can fly it.
CONNECTING YOUR PARROT
SKYCONTROLLER 2 TO YOUR
SMARTPHONE
1. Screw the smartphone holder onto the Parrot
Skycontroller 2.
B
A
B
A

13
ENGLISH
You can rotate the holder to fit your smartphone’s
dimensions. To do this, press on it and rotate it
to the right.
2. Press the right button on the holder to fully open it.
3. Position your smartphone on the holder.
4. Tighten the holder on your smartphone.
BA
B
A
5. Turn on the Parrot Skycontroller 2 and your drone.
6. Using your smartphone’s USB cable, connect your
smartphone to the Parrot Skycontroller 2’s USB port.
>The FreeFlight Pro application starts automatically.
You are connected.
B
A
B
A

14
USE THE PARROT
COCKPITGLASSES WITH A
PARROT SKYCONTROLLER 2
1. Connect your Parrot Skycontroller 2 to your drone.
2. Pull out the drawer on your Parrot Cockpitglasses.
3. Open the drawer.
4. Pass your smartphone’s USB cable through the
opening in the drawer.

15
ENGLISH
5.Plug one end of your smartphone’s USB cable into the
Parrot Skycontroller 2 and the other end into your
smartphone.
>The FreeFlight Pro application will launch automa-
tically on your smartphone.
6.In the FreeFlight Pro application, go to Fly & Film and
press .
>FPV mode launches on your smartphone.
7.Centre your smartphone in relation to the dots on the
drawer and block it on the central part of the drawer.
GPS
40%
0.0m/s
0.000...
?
GPS
40%
0.0m/s
0.000...
?
8.Close the drawer and slide it into the Parrot
Cockpitglasses.

16
9. Adjust the strap of the Parrot Cockpitglasses on your
head.
Note : Use the Parrot Skycontroller 2 to edit the
FreeFlight Pro application’s settings when you are
wearing Parrot Cockpitglasses.
TAKING OFF
Press the button on the Parrot Skycontroller 2.
>The Parrot Bebop 2 takes off and stabilises at 2
meters above the ground waiting for a command.
FPV MODE
Use See Through mode to see through the camera of your
smartphone when you are wearing Parrot Cockpitglasses.
Press the right trigger on the Parrot
Skycontroller 2 to switch from immersive view
to See Through.
There are several display mode in Freeflight
Pro application:
• Radar : Information about your Parrot
Bebop 2 position.
• Telemetry : Distance
between the pilot and the
Parrot Bebop 2, altitude
of the drone…
• Full Screen : Live video
streaming from the front camera of
the Parrot Bebop 2 without any other
information.

17
ENGLISH
FLYING
LEFT CONTROL
BA
BA
BA
BA
BA
BA
BA
BA
Go up
Go down
RIGHT CONTROL
Go forward
Go backward
Move right
Move left
Rotate right
Rotate left

18
RETURN HOME
To make the Parrot Bebop 2 return to its starting point,
press the button on the Parrot Skycontroller 2.
>The Parrot Bebop 2 comes back towards its starting
position. Once the Parrot Bebop 2 reaches its star-
ting point, it remains at 2 meters above the ground.
Make sure you are in an open environment.
LANDING
To land the Parrot Bebop 2, press the button on the
Parrot Skycontroller 2.
>The Parrot Bebop 2 lands.

19
ENGLISH
WARNING LIGHT
INDICATIONS
PARROT SKYCONTROLLER 2
Flashing
red light
The Parrot Skycontroller
2 is trying to connect to a
drone.
> Make sure your drone
is on.
Or
The battery of the Parrot
Skycontroller 2 or your
drone is low.
> Recharge the battery.
Or
The Parrot Skycontroller
2 has detected a problem
with the drone.
> Go to the Support
section on
www.parrot.com.
Steady
green light
The Parrot Skycontroller 2
is connected to the drone.
> You can fly the drone.

20
PARROT BEBOP 2
Steady
red Normal state.
Slowly
blinking red
The Parrot Bebop 2
is booting up.
Quickly
blinking red
A motor error is
detected. To locate the
defective motor:
In FreeFlight Pro, go
to Fly & Film > >
Information.
>The screen indicates
the defective motor.
Ensure the propeller
is not blocked or
damaged.