Partner SP-550 User manual

Safety information
• Before installing and using the machine, take note of the following precautions:
• Do not place the unit on an unstable surface, cart, or stand.
• Do not block the slots and opening on the unit, which are provided for ventilation.
• Only use the power source indicated on the marking label. If you are not sure,
contact your dealer or the Power Company.
• When replacing parts, ensure that your service technician uses parts specified by the
manufacturer.
• Do not place anything on the power cord. Place the power cord where it will not be in
the way of foot traffic.
WARNING
This is Class A Product. In domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取
某些適當的對策。
WARNING
The system uses a 3V CR2032 battery mounted on the mainboard to keep time. There
is a risk of explosion if the wrong battery type is used when replacing. Dispose of used
batteries according to local ordinance regulations.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to correct
the interference at their own expense
SP-550 Quick Start Guide
Identifying components
I/O Panel
I/O panel
DC12V-In
DC12V-Out
COM2
COM3PS/2 KB
COM4
LAN
RJ-11
Cash drawer port
VGA COM1 USB 3.0USB 2.0
USB 2.0
LED Power Indicator
15-inch TFT LCD
MSR (optional) Slot
VFD Customer Display
(optional) Slot
Cable Compartment
Cable Compartment Cover
I/O Cover
HDD Compartment Cover
HDD
Power Button

Specification
Item SP-550
CPU Type Intel®Bay Trail-D J1900 2.0G up to 2.4G, 2M Cache
LCD 15” Active TFT color LCD, 350 nits resolution 1024 x 768
Touch Projected Capacitive Touch
Memory 2G 204pin DDR3L-1333, SO-DIMM x 2 Max Support up to 8GB
LAN 10/100/1000 Gb Ethernet x 1
Storage 2.5” type SATA HDD x 1
I/O Interface 4* COM ports (COM1~4 on rear I/O powered with DC+5/+12V, COM1~2
by BIOS selection; COM3~4 by jumper)
1* DB-15 VGA port
1* RJ11 port supports 2 cash drawer(DC+24v)
1* RJ-45 LAN port with activity and link LEDs
1* PS/2 KB
1* DC+12v out Jack
6* USB (5 * USB 2.0 + 1 * USB 3.0)
1* DC +12V input power-jack
Expansion Options 1* Mini PCI-e, Support Wireless LAN module
Optional Peripherals 3 tracks magnetic reader
Customer display module (2 x 20 VFD, CD-7220), 2nd display (CD-70)
Operation System Window 7, POS Ready7, Window 8.1, Industry Pro Retail 8.1, Linux
(Ubuntu)
Power Supply AC100~240V/DC+12V, 90 watt power adapter
Dimensions Physical: 340.79mm (W) x238.2mm (D) x 328.64mm (H)
Operating Temp 0°C ~ +40°C
Storage Temperature -20°C ~ +60°C
Humidity 15%~80%
3. Press the power button on the right underside of the
computer.
Note: Press once to power on the system. Press it for
4~5 seconds to force the system power off.
Quick start
1. Connect the power cable to the DC-IN connector located on
the I/O panel.
2. Plug the power cable into an electrical outlet.