Partner PT-6212-EB User manual

PT-6212-EB
Unpacking and Setup Instructions
The PT-6212-EB and its accessories
are packed in a cardboard carton
with foam padding for protection
during shipment. Carefully unpack
the system and keep the packing
materials for future use.
Verify that all of the items shown
below are included in the box. If
an item is missing or appears to be
damaged, contact your Partner Tech
dealer immediately.
Step1: Unpack the box and check the contents.
PT-6212-EB
Adapter
Power Cable
3” thermal paper roll
Driver CD with drivers and
the user manual PDF le.
Step2: Connect the peripheral devices
Step3: Connect the power adapter
Caution: Be sure to connect the
peripheral devices to the appropriate
ports, as shown below. A device may
not function correctly if it is connected
to the wrong port.
Note: Drivers and utilities needed for PT-6212-EB are included in the
“User Manual and Driver CD”.
A. Connect the power cable to the
power socket located on the
left side of the PT-6212-EB I/O
panel.
B. Plug the power cable into an
electrical outlet.
Note: Using adaptor higher than
12V/15A may damage the system.
Cashdrawer
USB Compliant
devices
Adapter
ADSL modem or router
MR HS AA CD OH SD RD TR
Monitor
Keyboard

Step 5: Powering on the PT-6212-EB
www.partner.com.tw
© 2010 Partner Tech Corp. All Rights Reserved
Press the power button on the left underside of
the PT-6212-EB.
Note: Press once to power on
the system. Press it for 4~5
seconds to force the system
down.
The feed button
You can press the feed
button to auto-feed paper
from the printer.
Paper type
Thermal roll paper (single sheet)
Certied paper:
Original paper No. P350 KSP
Original paper No. TF50KS-E NIPPON PAPER INDUSTRIES CO., LTD.
Original paper No. AF50KS-E JUJO THERMAL
Original paper No. PD150R OJI PAPER MFG. CO., LTD.
Original paper No. PD160R OJI PAPER MFG. CO., LTD.
Original paper No. TF77KS-E NIPPON PAPER INDUSTRIES CO., LTD.
Original paper No. KT55 Koehler
Notes:
1. Print quality may differ depending on paper type.
2. Use the certied paper. Otherwise, proper print quality may not be obtained, print head reliability may decrease, or
the print head may become damaged.
Size:
Paper width: 79.5 ± 0.5 mm {3.13” ± 0.02”}
Outside diameter: 194x143.5x91.5(mm)
Thickness
56 to 95 μm
Setp 4. Installing the thermal paper roll
A.Open the printer cover.
B.Insert the thermal paper
roll as shown on the
picture.
C.Pull a portion of the
paper over the printer
output part.
D.Close the cover and
press it down until you
feel a click.