Pepperl+Fuchs DPU1100 Series User manual

VisuNet Display Unit
DPU1100-* and DPU1200-*
Manual

With regard to the supply of products, the current issue of the following document is applicable:
The General Terms of Delivery for Products and Services of the Electrical Industry, published
by the Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elek-
troindustrie (ZVEI) e.V.) in its most recent version as well as the supplementary clause:
"Expanded reservation of proprietorship"
Worldwide
Pepperl+Fuchs Group
Lilienthalstr. 200
68307 Mannheim
Germany
Phone: [phone] - 0
E-mail: [e-mail]
North American Headquarters
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, Ohio 44087
USA
Phone: [phone]
E-mail: [email protected]
Asia Headquarters
Pepperl+Fuchs Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Phone: [phone]
E-mail: [email protected]l-fuchs.com
https://www.pepperl-fuchs.com

VisuNet Display Unit
Contents
2023-02
3
1 Introduction................................................................................................................ 4
1.1 Content of this Document............................................................................. 4
1.2 Target Group, Personnel ............................................................................... 4
1.3 Symbols Used ................................................................................................ 5
2 Product Description .................................................................................................. 6
2.1 Overview......................................................................................................... 6
2.2 Technical Data 21.5-Inch Model ................................................................... 8
2.3 Technical Data 19-Inch Model..................................................................... 10
2.4 Marking ......................................................................................................... 11
2.5 Dimensions and Type Labels...................................................................... 13
3 Installation................................................................................................................ 16
3.1 Special Conditions of Use .......................................................................... 16
3.2 General Installation Requirements ............................................................ 16
3.3 Mechanical Installation ............................................................................... 17
3.4 Repair............................................................................................................ 18
4 Operation and configuration .................................................................................. 19
5 Bluetooth Interface.................................................................................................. 25
6 Appendix .................................................................................................................. 26
6.1 Support Pixel Errors .................................................................................... 26
6.2 Health Monitoring ........................................................................................ 26
6.3 Gloves Tested for Touch Sensitivity ........................................................... 28
6.4 Chemical Resistance of Sealant and Gasket ............................................ 29

2023-02
4
VisuNet Display Unit
Introduction
1 Introduction
1.1 Content of this Document
This document contains information that you need in order to use your product throughout the
applicable stages of the product life cycle. These can include the following:
•Product identification
•Delivery, transport, and storage
•Mounting and installation
•Commissioning and operation
•Maintenance and repair
•Troubleshooting
•Dismounting
•Disposal
The documentation consists of the following parts:
•Present document
•Instruction manual
•Datasheet
Additionally, the following parts may belong to the documentation, if applicable:
•EU-type examination certificate
•EU declaration of conformity
•Attestation of conformity
•Certificates
•Control drawings
•Functional safety manual
•Additional documents
1.2 Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-
ing lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation, com-
missioning, operation, maintenance, and dismounting of the product.The personnel must have
read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
Note
This document does not substitute the instruction manual.
Note
For full information on the product, refer to the instruction manual and further documentation on
the Internet at www.pepperl-fuchs.com.
Note
For specific device information such as the year of construction, scan the QR code
on the device. As an alternative, enter the serial number in the serial number search
at www.pepperl-fuchs.com.

VisuNet Display Unit
Introduction
2023-02
5
1.3 Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop-
erty damage.
Depending on the risk level, the warning messages are displayed in descending order as fol-
lows:
Informative Symbols
Action
1. This symbol indicates a paragraph with instructions.You are prompted to perform an action or
a sequence of actions.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Note
This symbol brings important information to your attention.

2023-02
6
VisuNet Display Unit
Product Description
2 Product Description
2.1 Overview
The display units are one of the three core devices of the VisuNet GXP systems 19" or 22"
which can be exchanged by the customer.The display units DPU1100-* and DPU1200-* are
display panels with optional 10-finger multi-touch-sensors. Displays and touch-sensors are
optically bonded with the hardened front glass.
Figure 2.1
The DPU1100-* and DPU1200-* display units are ATEX/IECEx certified, UL listed devices
intended for use in potentially explosive atmospheres, such as Zones 1/21 and 2/22 and Class
I/II, Div. 2, and Class III.
Connected to a Pepperl+Fuchs thin client or PC unit, the DPU serves as a display with an
optional touch screen. It enables users to perceive the system outputs of the computing unit
and to input user data.
Five system keys located on the front of the unit allow users to control system functions of the
display unit (e.g., brightness control) and the computing unit (e.g., home key). Integrated signal
lights on the front keys show selected failure modes in case of a defective component.
The display unit is optimized for use with the modular HMI components of the VisuNet GXP
product line: thin client unit (TCU1100-*/TCU1200-*), PC Unit (PCU1100-*/PCU1200-*), and
power supply unit (PSU1100-*/PSU1200-*).

VisuNet Display Unit
Product Description
2023-02
7
Figure 2.2

2023-02
8
VisuNet Display Unit
Product Description
2.2 Technical Data 21.5-Inch Model
Supply
Power dissipation 27 W
Power consumption average: 22 W
at maximum brightness: max. 27 W
Display
Ty p e LC display with LED backlight Optically
bonded
Screen diagonal 54.61 cm (21.5 inches)
Resolution 1920 x 1080 (Full HD), Aspect ratio 16:9
Color depth 16.7 Mio.
Contrast 5000 (typical)
Brightness 300 cd/m2
Reading angle 175°in all directions
Life span back lamp life: 50.000-hrs typical half life, at
20°C (68°F)
Input devices
Touchscreen Optional: projective capacitive, 10 finger multi-
touch, glove-friendly
Control elements 5 capacitive front keys (behind glass):
1 home button, 2 brightness control buttons, 1
touchscreen button, 1 power button
Interface
Interface type Interface v1.0 from Pepperl+Fuchs for com-
puting units from Pepperl+Fuchs
Bluetooth®v4.0, communication distance up
to 30 m in open terrain
Ambient conditions
Operating temperature 0 ... 50 °C (32 ... 122 °F) (normal operation)
-20 ... 50 °C (-4 ... 122 °F) (after 1 hour of
operation)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Relative humidity 93% at 40°C, non-condensating, according to
EN 60068-2-78
Shock resistance 18 shocks 15 g, 11 ms all axis, IEC 60068-2-
27
Vibration resistance 10 ... 150 Hz, +/- 0.075 mm, 1g, 10 cycles per
axis according to EN60068-2-6

VisuNet Display Unit
Product Description
2023-02
9
Mechanical specifications
Degree of protection IP66 (when mounted on the TCU or PCU unit
from Pepperl+Fuchs)
Material
Surface Front: glass (optional with stainless steel
bezel)
Back: Powder-coated aluminum
Mass approx. 15 kg (DPU1100-*)
approx. 11 kg (DPU1200-*)
Dimensions 624 mm x 458 mm x 35 mm
Cut out dimensions 583 mm x 417 mm

2023-02
10
VisuNet Display Unit
Product Description
2.3 Technical Data 19-Inch Model
Supply
Power dissipation 25 W
Power consumption average: 22 W
at maximum brightness: max. 25 W
Display
Ty p e LC display with LED backlights, optically
bonded
Screen diagonal 48.26 cm (19 inches)
Resolution 1280 x 1024 (SXGA), Aspect ratio 5:4
Color depth 16.7 Mio
Contrast 1000:1 (typical)
Brightness 450 cd/m2
Reading angle 170°horizontal, 160°vertical
Life span back lamp life: 50.000-hrs typical half life, at
25°C (77°F)
Input devices
Touchscreen optional: projective capacitive, 10 finger multi-
touch, glove-friendly
Control elements 5 capacitive front keys (behind glass):
1 home button, 2 brightness control buttons, 1
touchscreen button, 1 power button
Interface
Interface type Interface v1.0 from Pepperl+Fuchs for com-
puting units from Pepperl+Fuchs
Bluetooth®v4.0, communication distance up
to 30 m in open terrain
Ambient conditions
Operating temperature -20 ... 50 °C (-4 ... 122 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Relative humidity 93% at 40°C, non-condensating, according to
EN 60068-2-78
Shock resistance 18 shocks 15 g, 11 ms all axis, IEC 60068-2-
27
Vibration resistance 10 ... 150 Hz, +/- 0.075 mm, 1g, 10 cycles per
axis according to EN60068-2-6

VisuNet Display Unit
Product Description
2023-02
11
2.4 Marking
ATEX / IECEx / UKEx Marking
Mechanical specifications
Degree of protection IP66 (when mounted on the TCU or PCU from
Pepperl+Fuchs)
Material
Surface front: glass (optional with stainless steel bezel)
back: Powder-coated aluminum
Mass approx. 14.5 kg (DPU1100-*)
approx. 11 kg (DPU1200-*)
Dimensions 524 mm x 453 mm x 35 mm
Cut out dimensions 499 mm x 419 mm
Display Unit
DPU1100-J1-*
Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany
ATEX:
II 2G Ex eb q ib IIC T4 IP66 Gb
II 2D Ex tb IIIC T80 °C Db
IECEx:
IECEx BVS 16.0061X
UKEx:
CML 21UKEX3470X
II 2 G D
Ex eb q ib IIC T4 Gb
Ex tb IIIC T80°C Db
IP66
Display Unit
DPU1200-J2-*
Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany
ATEX:
II 2G Ex eb q ib IIC T4 IP66 Gb
II 2D Ex tb IIIC T80 °C Db
IECEx:
Ex ec IIC T4 Gc
Ex tc IIIC T80 °C Dc

2023-02
12
VisuNet Display Unit
Product Description
UL Marking
Note
FCC Digital Devices Statement for All DPU Models
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.
Note
Additional Information for Models with Bluetooth®Option
Contains FCC ID: SQG-BT800
Contains IC ID: 3147A-BT800
Device complies with CAN ICES-3(A)/NMB-3(A)

VisuNet Display Unit
Product Description
2023-02
13
2.5 Dimensions and Type Labels
Dimensions 21.5-Inch Model
Figure 2.3 Dimensions with bezel 21.5 inch
Figure 2.4 Hole pattern 21.5 inch
625
515
458 358
2.5
6.1
35.3
72 138 138 138 72
53 96 96 96 53
6
35
580
414
ø 6.5 (20x)
Note
The VisuNet GXP DPUs can be mounted within the AG-XX00 housing as well as panel
mounted or flush mounted. For further information regarding the installation and mounting,
refer to VisuNet GXP 22" system manual.

2023-02
14
VisuNet Display Unit
Product Description
Dimensions 19-Inch Model
Figure 2.5 Dimensions with bezel 19 inch
Figure 2.6 Hole pattern 19 inch
524
453
35.3
418
383 52.3
436
84
84
84
84
84
482
127
40 40
129.5 129.5
Ø
4.5(20x)
35
6
Note
The VisuNet GXP DPUs can be mounted within the AG1 housing as well as panel mounted or
flush mounted. For further information regarding the installation and mounting, refer to
VisuNet GXP 19" system manual.

VisuNet Display Unit
Product Description
2023-02
15
Labels
The following labels are present on the display unit.
Type label display unit
optional: GXP type label optional, in case of a GXP panel, otherwise
mounted on GXP enclosure
Warning marking
"Warning –Do not open! This enclosure is fac-
tory sealed."
"Avertissement –Cette enveloppe est scellée
en usine. Ne pas l'ouvrir!"
Warning marking
"Warning –Do not open when energized!"
"Warning –Refer to instruction manual!"
"Avertissement –Ne pas ouvrir sous tension!"
"Avertissement –Reportez-vouz au manuel
d'instruction!"
Warning marking
"Warning - Potential Electrostatic Charging
Hazard - See Instructions"
Warning - Do not open!
This enclosure is factory
sealed!
Warning - Refer to
instruction manual!
Warning - Do not open
when energized!

2023-02
16
VisuNet Display Unit
Installation
3Installation
3.1 Special Conditions of Use
•The DPU must be mated with a suitably certified module, such as a TCU or PCU.
(DPU1100 with TCU1100/ PCU1100 and DPU1200 with TCU1200/ PCU1200)
•Connection of DPU and TCU/PCU shall only be made when de-energized.
•The danger of ignition due to electrostatic discharges must be avoided by mounting the
apparatus in areas without electrostatic charging mechanism. See IEC 60079-32-1 for fur-
ther information.
•In hazardous dust environments, regularly remove dust from the display unit to prevent
excessive temperature rise. Use a clean damp cloth.
•The device shall be installed such that risk of high-impact energy on display glass is con-
sidered to be low.
•Mount the device in such a way that it is protected from ultraviolet radiation and from direct
sunlight.
3.2 General Installation Requirements
Observe the following requirements when installing the display unit.
•The equipment must be installed by competent personnel in accordance with the instruc-
tions. National laws and regulations must be observed.
•The building installation must provide a 20 A overcurrent protection.
•The installer must make a readily accessible disconnect device available.
•The safety of any system incorporating the power supply unit is the responsibility of the
assembler of the system.
•Power supplied from the TCU**00-* or PCU**00-* needs to be from a SELV or PELV
source.
Note
For detailed installation information, see the VisuNet GXP system manual.
Caution!
Device damage!
Mount the device in such a way that it is protected from ultraviolet radiation and sunlight. Do not
expose the device to direct sunlight! The device might get damaged.
Caution!
Use of the device!
The use of the device is only permitted under the ambient conditions (temperature, humidity,
vibration and shock) which are specified in the technical data. Failure to comply with any of
these conditions void the warranty for the device. Pepperl+Fuchs cannot be held liable for any
damage arising from improper use and handling.

VisuNet Display Unit
Installation
2023-02
17
3.3 Mechanical Installation
Mounting the PCU/TCU onto the DPU
1. Ensure the correct position of the PCU/TCU.
2. Place the PCU/TCU with the Pepperl+Fuchs connector above the Pepperl+Fuchs socket on
the back of the display unit.
3. Carefully push the Pepperl+Fuchs connector into the Pepperl+Fuchs socket.
Note
For system installation instructions and complete mounting options, see the VisuNet GXP
System Manual.

2023-02
18
VisuNet Display Unit
Installation
4. Use the mounting screws to attach the PCU/TCU onto the display unit (tightening torque 2 Nm).
Figure 3.1 Mounting the TCU/PCU onto the display unit
3.4 Repair
Caution!
Damage to pins
Carefully align the PCU/TCU with the DPU when connecting the units. Mounting or dismount-
ing the PCU/TCU at an angle can damage the pins.
Note
The DPU can be dismounted from the PCU/TCU and sent to Pepperl+Fuchs for repair and/or
replacement. For mounting and dismounting instructions, see the VisuNet GXP system
manual.

VisuNet Display Unit
Operation and configuration
2023-02
19
4 Operation and configuration
Front buttons
The DPU1100-*/DPU1200-* provides several system functions via the capacitive front buttons.
The front buttons are embedded in the system and located behind the security glass.
Figure 4.1 Buttons on the display front
Warning!
Warning!
Do not use sharp tools like screwdrivers to trigger the front buttons.
Warning!
Warning!
Do not use the display when there are scratches in the front glass.
Button Description
1Home Configurable front button to call a specified function
2Brightness - Reduce display brightness (dimmable to 0 %)
3Brightness + Increase display brightness
4Touch screen Enable/disable touch screen (e.g. for cleaning purposes).
If the display unit has no built-in touch screen, the touch
screen button is disabled.
5Power Configurable power button (shutdown, restart, hibernate);
button can be disabled
Status OFF -
Power OFF
off off off off off
Status OFF -
Power ON
off off off off on (solid
white)
Power ON -
Touch screen
ON
on (solid
white)
on (solid
white)
on (solid
white)
on (solid
white)
on (solid
green)
Power ON -
Touch screen
OFF
on (solid
white)
on (solid
white)
on (solid
white)
on (flashing
white)
on (solid
green)
1 2 3 4 5

2023-02
20
VisuNet Display Unit
Operation and configuration
Status OFF - Power OFF
LEDs off
Status OFF - Power ON
Power LED solid white
Power ON - Touch screen ON
•Power LED solid green
•Other LEDs solid white
Power ON - Touch screen OFF
•Power LED solid green
•Touch screen LED flashing white
•Other LEDs solid white
Power ON -
Display OFF
(brightness
0%)
on (solid
white)
on (solid
white)
on (flashing
white)
on (solid
white)
on (solid
green)
Sleeping
mode
off off off off on (flashing
green)