Petzl I'D S Installation instructions

1/4
PPE INSPECTION - Inspection procedure - I'D S, I'D L and RIG (120315)
PPE Inspection
Inspection procedure
• In addition to routine checks for each use, PPE should regularly undergo a detailed inspection by a competent
person.
Petzl recommends an inspection every 12months and after any exceptional event in the life of the product.
• PPE inspection should be done with the manufacturer's instructions available for reference. Download the instructions
at PETZL.COM
1. Known product history
Any PPE showing unexpected degradation should be quarantined, pending a detailed inspection.
The user should:
- Provide precise information on the usage conditions.
- Report any exceptional event regarding his PPE.
(Examples:fall or fall arrest, use or storage at extreme temperatures, modification outside manufacturer's
facilities,etc.).
2. Preliminary observations
• Verify the presence and legibility of the serial number and the CE mark.
• Verify that the product lifetime has not been exceeded.
• Compare with a new device to verify there are no modifications or missing elements.
3. Checking the moving side plate
• Check the condition
of the moving side plate
(marks, deformation,
fouling, cracks, wear...).
• Verify that the moving
side plate opens and closes
properly. Check the moving
side plate for deformation
or excessive play: if the side
plate can pass over the head
of the cam axle, discontinue
use of the product.
• Check the condition of the safety gate and the effectiveness of the spring.
I'D S, I'D L and RIG

2/4
PPE INSPECTION - Inspection procedure - I'D S, I'D L and RIG (120315)
• Check the condition of the
attachment hole (marks, deformation,
cracks, corrosion...).
• Check the condition of the rivets
(marks, deformation, cracks, corrosion,
absence of play...).
4. Checking the condition of the frame
• Check the condition of the cam and its axle
(marks, deformation, fouling, cracks, crazing,
corrosion...).
Wear indicator (I'D only) if the cam groove is
worn to the wear indicator, discontinue use of
the I’D.
• Check the cam's rotation and the
effectiveness of the return spring.
• Check the condition
of the attachment hole
(marks, deformation,
cracks, corrosion...).
• Check the condition of
the friction plate (marks,
deformation, fouling,
cracks...).

3/4
1.
2.
3.
4.
5.
1.
2.
3.
I’D
RIG
1.
2.
3.
4.
5.
1.
2.
3.
I’D
RIG
1.
2.
3.
4.
5.
1.
2.
3.
I’D
RIG
PPE INSPECTION - Inspection procedure - I'D S, I'D L and RIG (120315)
5. Checking the condition of the handle
6. Function check
• Check the condition of the handle (marks,
deformation, cracks...).
• Verify that all of the handle positions are accessible
and well defined.
• Do a function check with
the device on the harness.
Pull on the anchor side of
the rope; the rope must lock
in the device.
• On the I'D, verify that
the horizontal positioning
button is working properly.
• On the RIG, check that the handle return spring is
working properly.
• On the I'D, check the condition of the anti-error
catch (marks, deformation, cracks, corrosion...)
Check that all teeth are present and check their
state of wear. The teeth must not be fouled. If
necessary, clean them with a brush.
• Check the rotation of the anti-error catch and the
effectiveness of the return spring.
• Check the condition of the rivets (marks,
deformation, cracks, corrosion, absence of play...).

4/4
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
aspect dans le contexte
NOTICE
picto “V” ou “X” combiné à l’action à mener
4 aspects dans le contexte
FICHE EPI
action à mener
Petzl
PPE INSPECTION - Inspection procedure - I'D S, I'D L and RIG (120315)
7. Appendix: examples of I'D, RIG that are worn out, or that should be retired
• Dirty I'D
• Hole in side plate
• Hole in cam
• Corrosion
• Deformed catch
• Cam groove worn to wear
indicator
• Stuck button
• Worn cam groove
• Attachment hole deformed by a
shock load
• Bent side plate
• Broken handle