Philips Dynalite DMC-GRMS-UL User manual

www.lighting.philips.com/dynalite
Installation Instructions
Instructions d’installation
Installationsanweisungen
Instrucciones de instalación
Istruzioni per l’installazione
Installatie-instructies
インストー ル 手 順
安装指示
1 2
40° C (104° F)
0° C (32° F)
≤
90%
DMC-GRMS-UL
244 mm (9.61 in) 320 mm (12.60 in)
431 mm (16.97 in)
473 mm (18.62 in)
500 mm (19.69 in)
107 mm
(4.21 in)
X 4
X 4
RJ45 X 3
286 mm (11.26 in)
Devices must be installed by a
qualied electrician in accordance with
all national and local electrical and
construction codes and regulations.
Les appareils doivent être installés par un
électricien diplômé conformément à tous les
codes et réglementations électriques et de
construction nationaux et locaux.
Die Geräte sind von einem qualizierten Elektriker
in Übereinstimmung mit allen geltenden
Vorschriften zu installieren.
Los dispositivos deben ser instalados por un
electricista calicado y cumpliendo todas las
normas y regulaciones, tanto nacionales como
locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un
elettricista qualicato in conformità con le norme
locali e nazionali vigenti in materia di costruzioni
edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht
door een gekwaliceerde elektricien en in
overeenstemming met alle nationale en
plaatselijke elektriciteits- en bouwvoorschriften.
装置を取り付ける際は、資格のある電気技師に依頼し、
国および地域の電気および建設に関するすべての法令に
従 ってくだ さい 。
根据国家/地区及当地的电气与建筑规范和法规，该设
备必须由有资质的电工进行安装。
.
Guest Room Modular
Controller
IEC Pollution Degree II

2
4
5
12V
24V
Output Ratings / Channel (CH)
General Use
Load Type CH9 - CH13 CH14, CH16 CH15, CH17 CH18 - CH19 OUT1 - OUT3
16 A, 277 V 16 A, 277 V 16 A, 277 V 1 A, 30 V
16 A, 277 V (N/O)
4 A, 250 V (N/C)
Incandescent
Resistive
Electronic Driver
TV Rating
Inrush Current
Motor
10 A, 120 V
4.3 A, 277 V
3 A, 277 V
TV-8, 120 V
165 A
9.8 FLA (1/
2
HP),
120 V
8 FLA (1 HP),
240 V
TV-5, 120 V
10 A, 120 V
4.3 A, 277 V
TV-8, 120 V
165 A100 A
9.8 FLA (1/
2
HP),
120 V (N/O)
8 FLA (1 HP),
240 V (N/O)
TV-5, 120 V
100 A
M
Output Ratings/Group
CH1-CH4* ≤ 10 A
CH5-CH8* ≤ 10 A
CH10-CH13 ≤ 16 A
CH18-CH19 ≤ 16 A
DMC-GRMS-UL ≤ 132 A
* Ratings for CH1-CH8 are based on module rating.
5 A, 120 V
3 A, 277 V
5 A, 120 V
1 A, 30 V 1 A, 30 V 1 A, 30 V
3 A 3 B
LE/TE dimming module supply must be from the same phase as the controller supply

3
20 A
N
NC
L
CH1-4-L-IN
20 A
20 A
20 A
20 A
CH1-4-N-IN
CH1-L-OUT
CH1-N-OUT
CH2-L-OUT
CH2-N-OUT
CH3-L-OUT
CH3-N-OUT
CH4-L-OUT
CH4-N-OUT
CH5-8-L-IN
CH5-8-N-IN
CH5-L-OUT
CH5-N-OUT
CH6-L-OUT
CH6-N-OUT
CH7-L-OUT
CH7-N-OUT
CH8-L-OUT
CH8-N-OUT
CH10-13-IN
CH10-OUT
CH11-OUT
CH12-OUT
CH13-OUT
CH14-IN
CH14-OUT
CH15-IN
CH15A-OUT
CH15B-OUT
CH16-IN
CH16-OUT
CH17-IN
CH17A-OUT
CH17B-OUT
CH18-19-IN
CH18-OUT
CH19-OUT
NC
CH9-IN
CH9-OUT
20 A
20 A
20 A
20 A
0.5 Nm
4.4 Lb-in
≤5 mm2
10+ AWG
6 8
IEC Overvoltage Category III
POWER
CLASS 1 / CLASS 2
L/N: POWER
DA+/DA-: CLASS 1 or CLASS 2
N
GND
DMX Tx
Port 1
DyNet RS-485
Room
connection
Port 2
DyNet RS-485
Floor
connection
D–
D+
+V
D–
D+
GND
SHLD
RJ45
Socket
+V
D–
D+
GND
SHLD
2 X RJ45
Sockets
IN
C
IN1
C
IN2
IN3
C
IN4
Room
address
OUT1
Dry
contact
outputs
Dry
contact
inputs
UL924
OUT2
OUT3
NC
L
CH1-4-L-IN
CH1-4-N-IN
L/DA+
CH1
CH2
CH3
CH4
N/DA-
L/DA+
N/DA-
L/DA+
N/DA-
L/DA+
N/DA-
L/DA+
CH5
CH6
CH7
CH8
N/DA-
L/DA+
N/DA-
L/DA+
N/DA-
L/DA+
N/DA-
CH5-8-L-IN
CH5-8-N-IN
CH10-13-L-IN
CH10-OUT
CH11-OUT
CH12-OUT
CH13-OUT
CH14-L-IN
CH14-OUT
CH15-L-IN
CH15A
CH15B
CH16-L-IN
CH16-OUT
CH17-L-IN
CH17A
CH17B
CH18-19-L-IN
CH18-OUT
CH19-OUT
CH9-L-IN
CH9-OUT
µP
1
2
3
4
100-240 V ± 10%
12/24 V
200 mA
12/24 V
50 mA
7
OUT 1
DRY CONTACT OUTPUTS
OUT 2
OUT 3
≤2.5 mm2
12+ AWG
0.5 Nm
4.4 Lb-in
30 V
≤ 1 A

4
1 x 4 A Trailing Edge
dimmer module
DGTM104
2 x 2 A Trailing Edge
dimmer module
DGTM202
DGBM200
2 CH ballast
module
DGRM204
2 x 4 A relay
module
DGLM105
1 x 5 A Leading Edge
dimmer module
DGTM402
4 x 2 A Trailing Edge
dimmer module
DGLM402
4 x 2 A Leading Edge
dimmer module
DGCM102
1 x 2 A curtain
module
DGFM102
1 x 2 A fan
module
2 x 2 A Leading Edge
dimmer module
DGLM202
9
10 11
9
12 A
N
L
N
CH A
CH B
DGCM102
1 x 2 A
curtain
module
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
IN-L
IN-N OUT2-N
OUT1-L OUT1-N OUT2-L
Load Type Output Ratings
per Channel
General use
Motor x 1
2 A, 230 V
4.4 FLA (1/
6
HP), 120 V
4.9 FLA (1/
2
HP), 230 V
M

5
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
DGRM204
2 x 4 A
relay module
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
OUT1-L OUT1-N OUT2-L OUT2-N
IN-L
IN-N
L
N
Load Type Output Ratings
per Channel
4 A, 230 V
Incandescent 600 W, 120 V
1100 W, 230 V
Magnetic with
Halogen
4 A, 120 V
3 A, 230 V
Electronic
Driver
2 A, 120 V
Module Load
≤
5 A
General use
12
12
B
C
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
DGFM102
1 x 2 A
fan module
HI MED LOW OFF
IN-L
IN-N
OUT1-L OUT1-N OUT1-L OUT1-N
L
N
Load Type Output Ratings
per Channel
400 VA, 230 V
Not suitable for 120 V (Not UL listed)
Motor x 1
M
12 D
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
Protocol
DGBM200
2 CH
ballast module
N
A
L
B
N
L
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
OUT1-DA+ OUT1-DA- OUT2-DA+ OUT2-DA-
DALI/1-10V/DSI
DALI/1-10V/DSI
A
1-10 V DSI/DALI 1-10 V DSI/DALI
B
DALI
Broad-
cast/
DSI
Control Channel Ratings
1-10 V
≤ 5/CH
13 V
Guaranteed 10 mA,
Maximum 250 mA
Insulation: basic
≤ 10
Sink 10 mA / Source 10 mA
L
N

6
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
DGLM202
2 x 2 A
LE dimmer
module
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
IN-L
IN-N
Load Type Output Ratings
per Channel
Magnetic with
Halogen
2 A, 120 / 230 V
Electronic
Driver*
*can be limited by load capacitance.
Apply de-rating for electronic and LED loads.
OUT1-L OUT1-N OUT2-L OUT2-N
Incandescent
N
NC
LL
N
N
1
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
DGTM202
2 x 2 A
TE dimmer
module
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
OUT1-L OUT1-N OUT2-L OUT2-N
IN-L
IN-N
Not compatible with magnetic transformers.
Apply de-rating for electronic and LED loads.
Load Type Output Ratings
per Channel
Incandescent
Electronic
Driver
2 A, 120(UL) / 230 V
N
NC
LL
N
1N
12
12
12
E
F
G
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
DGTM104
1 x 4 A
TE dimmer
module
OUT1-L OUT1-N OUT1-L OUT1-N
IN-L
IN-N
Not compatible with magnetic transformers.
Apply de-rating for electronic and LED loads.
Load Type Output Ratings
per Channel
4 A, 120(UL) / 230 V
Incandescent
Electronic
Driver
N
NC
LL
N
N
1
Module supply must be on same phase
as controller supply
Module supply must be on same phase
as controller supply
Module supply must be on same phase
as controller supply
4 A, 120(UL) / 230 V
2 A, 120 / 230 V
2 A, 120 / 230 V
2 A, 120(UL) / 230 V

7
DGLM105
1 x 5 A
LE dimmer
module
*can be limited by load capacitance
Apply de-rating for electronic and LED loads.
Do not place module in the middle position.
Load Type Output Ratings
per Channel
Magnetic with
Halogen
5 A, 120 / 230 V
Electronic
Driver*
Incandescent
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
N
NC
LL
N
N
1
OUT1-L OUT1-N OUT1-L OUT1-N OUT1-L OUT1-N OUT1-L OUT1-N
IN1-L
IN1-N
IN2-L
IN2-N
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
DGLM402
4 x 2 A
LE dimmer
module
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
*can be limited by load capacitance
Apply de-rating for electronic and LED loads.
Load Type Output Ratings
per Channel
Magnetic with
Halogen
Electronic
Driver*
Incandescent
OUT1-L OUT1-N OUT2-L OUT2-N OUT3-L OUT3-N OUT4-L OUT4-N
IN1-L
IN1-N
IN2-L
IN2-N
N
NC
L
N
NC
LL
N
N
1
CH 1
CH1-4-L-IN
CH1-4-N-IN
CH 2
CH 3
CH 4
DGTM402
4 x 2 A
TE dimmer
module
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
L/DA+
N/DA–
Not compatible with magnetic transformers.
Apply de-rating for electronic and LED loads.
Load Type Output Ratings
per Channel
2 A, 120(UL) / 230 V
Electronic
Driver
Incandescent
IN1-L
IN1-N
IN2-L
IN2-N
OUT1-L OUT1-N OUT2-L OUT2-N OUT3-L OUT3-N OUT4-L OUT4-N
N
NC
LL
N
N
1
H
12 J
12
12 I
Module supply must be on same phase
as controller supply
Module supply must be on same phase
as controller supply
Module supply must be on same phase
as controller supply
5 A, 120 / 230 V
5 A, 120 / 230 V
2 A, 120 / 230 V
2 A, 120 / 230 V
2 A, 120 / 230 V
2 A, 120(UL) / 230 V

8
13 14
14
A
B
15 SELV/CLASS 2 POWER/CLASS 1 SELV/CLASS 2
CLASS 1
CLASS 2
CLASS 1
CLASS 2
CLASS 2
CH14-IN
CH14-OUT
CH15-IN
CH15A-OUT
CH15B-OUT
CH14-IN
CH14-OUT
CH15-IN
CH15A-OUT
CH15B-OUT
CH16-IN
CH16-OUT
CH17-IN
CH17A-OUT
CH17B-OUT
CH16-IN
CH16-OUT
CH17-IN
CH17A-OUT
CH17B-OUT
N
L
M
N
L
M
C
PLC
M
C
PLC
M

9
DyNet RS-485
PORT 2 FLOOR
PORT 2 FLOOR
DMX
DyNet RS-485
PORT 2 FLOOR
DMX
PORT 1 ROOM PORT 1 ROOM
9
16
17
DMX 512
ON
DMX 512
OFF

10
DMX SWITCH
DyNet RS-485
D+
D-
N/A
+12/24 V
+12/24 V
N/A
GND
GND
D+
D-
N/A
+12/24 V
+12/24 V
N/A
GND
GND
DyNet RS-485
DyNet RS-485
D-
D+
GND
DMX Tx
SHLD
GND
D+
D-
+12/24 V
DyNet RS-485
SHLD
GND
D+
D-
+12/24 V
DyNet RS-485
≤2.5 mm2
12+ AWG
0.5 Nm
4.4 Lb-in
≤2.5 mm2
12+ AWG
0.5 Nm
4.4 Lb-in
≤2.5 mm2
12+ AWG
0.5 Nm
4.4 Lb-in
≤ 2 A
≤ 2 A
18
19
20
A
A
B
B
ROOM
FLOOR
ROOM
FLOOR

11
N
L
≤5 mm2
10+ AWG
0.6 Nm
5.5 Lb-in
DRY CONTACT
OUTPUTS
UL924
DyNet RS-485
0.5 Nm
4.4 Lb-in
≤2.5 mm2
12+ AWG
DRY CONTACT
INPUTS 1
C
2
3
C
4
1 C
< 20 m
1 2 3 4
ROOM ADDRESS
5 6 7 8
124816 3264
128
ON
OFF
1
2
3
21
23
22
Refer to product label for Earth bar and Neutral bar wire gauge and torque ratings

Philips Dynalite
www.lighting.philips.com/dynalite
© 2018 Signify Holding. All rights reserved.
27
26
The manufacturer is not responsible for dimmable lamp selection. Each lamp/dimmer combination must be tested for compatibility prior to installation.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice – This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help. Any modications not approved by the manufacturer of this device could void the user’s authority to operate this device.
Installation of a home and building automation and control system shall comply with HD 60364-4-41. The temperature limits and current-carrying capacities for
the communication wires specied in HD 384.5.523 shall not be exceeded.
This Class B digital apparatus complies with Canadian ICES-003: CAN ICES-3(B)/NMB-3(B). Cet appareil numerique de la classe B est conforme a la norme NMB-
003 du Canada: CAN ICES-3(B)/NMB-3(B).
AZZ 445 1018 R12
DMC-GRMS-UL - HOTEL ROOM CONTROLLER
Attach expansion module label here
CH16-IN
CH16-OUT
CH17-IN
CH17A-OUT
CH17B-OUT
CH1-4-L-IN
CH1-4-N-IN
CH1-L/DA+
CH1-N/DA-
CH2-L/DA+
N
NC
L
CH2-N/DA-
CH3-L/DA+
CH3-N/DA-
CH4-L/DA+
CH4-N/DA-
CH14-IN
CH14-OUT
CH15-IN
CH15A-OUT
CH15B-OUT
CH18-19-IN
CH18-OUT
CH19-OUT
IN
C
+V
D-
D+
GND
SHLD
2x RJ45
Sockets
OUT1
OUT2
OUT3
30 V~/, 1 A
30 V~/, 1 A
30 V~/, 1 A
+V: Output 12/24 V, 50 mA
D+, D-: RS485, 3.3 V
UL924 DyNet Port 2
RS485
Dry contact
outputs
10 V
1 mA max.
NEC: CLASS1 or CLASS2
IEC: HAZARDOUS or SELV
CH10-13-IN
CH10-OUT
CH11-OUT
CH12-OUT
CH13-OUT
Module 4
+V
D-
D+
GND
SHLD
12345678
CH5-8-L-IN
CH5-8-N-IN
CH5-L/DA+
CH5-N/DA-
CH6-L/DA+
CH6-N/DA-
CH7-L/DA+
CH7-N/DA-
CH8-L/DA+
CH8-N/DA-
Module 3
Module 2
Module 1
CH9-IN
CH9-OUT
Dry contact
inputs
1
C
2
C
3
4
DyNet Port 1
RS485
+V: Output 12/24 V, 200 mA
D+, D-: RS485, 3.3 V
DMX
D-
D+
GND
Terminals this side - 5.5 in-lb max. tightening torque
Attach module label here
10 V
1 mA max.
RJ45
Table 1
Load Type Maximum ratings
General Use
Incandescent
Electronic Ballast
Standard Ballast
TV Rating
16 A, 277 V~
1200 W, 277 V~
5 A, 120 V~
3 A, 277 V~
2 A, 277 V~
TV-8, 120 V~
Table 2
Load Type
General Use
Motor
16 A, 277 V~ (N/O only)
4 A, 250 V~ (N/C only)
0.5 HP, 120 V~ (N/O only)
1 HP, 250 V~ (N/O only)
Maximum ratings
Channel rating
refer Table 1
Channel rating
refer Table 1
Maximum
group load 16 A
Channel rating
refer Table 2
Channel rating
refer Table 2
Channel rating
refer Table 2
Channel rating
refer Table 2
Channel rating
refer Table 1
Maximum
group load 16 A
NC = Not connected
N/C = Normally closed
N/O = Normally open
Controller
Supply
120/230 V~ +10%/-15%
50/60 Hz Single Phase 0.7 A max.
Attach module label here
Attach module label here
Attach module label here
CAUTION:
See Instruction Manual for Installation, Operation,
and Maintenance Instruction
EMERGENCY CIRCUITS
Dry Contact Input/UL924: 0.13 - 1.5 mm2,(#26 - 16 AWG) Torque: 0.33 Nm (3.0 Lb-in)
Dry Contact Output/DyNet: 0.3 - 4 mm2 (#22 - 12 AWG) Torque: 0.5 Nm (4.4 Lb-in) CLASS 2/ SELV ONLY
NC
ROOMFLOOR
ON
Module 1
Attach module label here
24