Plantronics BackBeat GO User manual

WIRELESS STEREO
LEARN MORE
Designed in Santa Cruz, California

2
Calls and streaming audio
• Takeacallorendit (1 tap)
• Rejectacall (2-second press)
• Putrstcallonholdandanswersecondcall
(1 tap)
• Switchbetweencalls (2-second press)
• Endsecondcallandretrieverstcall(1 tap)
• Transfercallfromphone (1 tap)
• Redial (2 taps)
• Usephone’svoice-controlfeaturetomake
acall (2-second press until tone is heard)
• ReconnectlostBluetooth®connection
(1 tap if the earbuds can’t automatically
reconnect)
• Playorpauseaudio (1 tap)
  MicroUSBchargingport
 (rightearbud)
• 1hourbeforerstuse(LED is red
until fully charged)
• 2.5hoursforfullcharge
  LED(rightearbud)
Volume,trackingandmute
• Volumeupordown(1 tap on + or
– per level change)
• Trackforwardorback(2-second press on +
or – per track change)
• Muteonoroffduringacall(1 tap on both +
and – )
  PowerON/OFF,pairingand
 batterycheck
• Turnonoroff(2-second press)
• Activatepairingmodeafterinitialsetup
(press until LED flashes red/blue)
• Checkbatterylevel(1 tap when power is on)
Be safe! Please read the safety guide for
important safety, charging, battery and
regulatory information before using your
new earbuds.
TAKE A LOOK
B
A C
D
E
A
D
D
E
B
C
L

3
Earbuds can only be paired and connected
with one device at a time. See “Switch Devices”
section for more detail.
1. READY
Firsttime,rightoutofthebox:
With earbuds turned off, activate Bluetooth
pairing mode by pressing Power/Pairing
button. The LED flashes red/blue to indicate
pairing mode.
Pairingnewphone/reconnectingoriginal:
With earbuds turned off, press Power/Pairing
button until the LED flashes red/blue.
2. SET
Activate the Bluetooth feature on your device,
then use phone menus to “add”, “search” or
“scan” for new Bluetooth devices.
Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone: Settings/options >
Bluetooth: On > Search for devices
Android™smartphone: Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_BBTGO” from the list of Bluetooth
devices shown on your device.
If device asks for a passcode, enter four zeros
(0000). You may see **** on screen.
Some devices also ask to confirm connection
after pairing.
The earbud’s LED will stop flashing red/blue
once successfully paired/connected.
You can now make a call using your device’s
keypad or voice-dialing feature and enjoy
audio listening from your device.
GET CONNECTED
LED
POWER
R
PLT_BBTGO

4
The right fit = the best audio:
For the best sound performance and a secure,
comfortable fit, be sure to adjust the earbuds
to rest gently in your ear and drape around
the back of your neck. Use the provided fit kit
to find the eartip that works best for you.
For additional support, place the optional
stabiliser behind the eartip.
The loop of the stabiliser will fit snugly into
the back area of your ear.
TRY IT ON
R
1 2 3 4
LEFT
3 41 2
L LL L
LEFT
3 41 2
L LL L
LEFT
3 41 2
L LL L
LEFT
3 41 2
L LL L
LEFT

5
BackBeat GO does not support multipoint
connectivity, so it can only recognise and
remember one paired device at a time.
For example, each time you switch from using
your smartphone to your tablet, you will need
to establish a new pairing with your BackBeat
GO earbuds.
For some phones and tablets, if reconnection
by selecting “PLT_BBTGO” from the list of
known devices does not work at first try, you
need to delete “PLT_BBTGO” from the list and
try a new pairing.
SWITCH DEVICES

6
Stay near your device:
Bluetooth has a working “range” of up to
10 meters (33 feet) between your phone
and earbuds before audio degrades and
the connection is lost. For best audio
reception, keep your phone on the right
side of your body.
Learn how to reconnect:
Your earbuds try to reconnect a lost
connection. If they can’t, then tap the Call
button once or manually reconnect via your
phone’s Bluetooth menu.
Decipher the beeps:
If you have a call on hold, you will hear a beep
every 5 seconds. If you are on mute, you will
hear a beep every 30 seconds.
In addition, if you long-press certain buttons
(more than 2-second press), a feedback beep
will be heard (example, accessing the Voice
Control feature on your phone).
Juggle two calls:
You can take a second call and place the first
call on hold by tapping the Call button to
accept the new call.
Switch between calls by pressing the Call
button for a few seconds and you will hear a
beep, indicating the switch is happening.
You can end a call and return to the other
call on hold by tapping the Call button. Some
phones require tapping the Call button twice.
Use your voice:
Some smartphones allow you to use voice
commands to activate their features, such as
voice-dialing or playing music.
To activate your smartphone’s voice controls,
press the Call/Audio button until you hear
your phone prompt you for a command.
Never miss a call:
You will hear an incoming call alert while
listening to stored or streaming audio.
When you take the call, your stored audio
(downloaded tunes, video or podcasts)
will pause.
If you are listening to live streaming audio
(Internet radio) then it will mute, not pause,
during your call. Once you end your call, your
playback or streaming will resume.
Check the battery level:
If you are on a call or listening to audio you
will hear a tone when the battery is low.
You can check the battery level by tapping the
Power button. The LED flashes to show the
charge level.
Blue flash = battery OK to full
Red flash = less than 15 minutes call
time remaining
Keep it clean
Use a dry cotton swab to wipe clean the
eartip and fabric screen that covers the
speaker.
TIPS

7
Talk time Up to 4.5 hours
Play time Up to 4 hours
Standby time Up to 10 days
Operating distance (range) Up to 10 meters (33 feet) from device
Headphones weight 13 grams
Speakers 6mm neodymium
Noise reduction Digital Signal processing (DSP) and full duplex echo
cancellation
Charge connector Micro USB charging
Battery type Rechargeable, non-replaceable lithium-ion polymer
Charge time (maximum) 2.5 hours
Power requirements 5V DC – 180 mA
Bluetooth version v2.1 + EDR
Bluetooth profiles A2DP 1.2, AVRCP, HFP v1.5, HSP v1.1
Operating, storage and
charging temperature
0°C – 40°C (32°F – 104°F)
SPECIFICATIONS

8
NEED MORE HELP?
*Support in English plantronics.com/support
Plantronics Ltd
Royal Wootton Bassett, UK
Tel: [phone]
[phone]*
Czech Republic
[phone]*
Danmark
Tel: [phone]
Plantronics GmbH
Köln, Deutschland
Kundenservice:
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
Για περισσότερες
πληροφορίες:
[phone]*
Plantronics Iberia, S.L.
Madrid, España
Tel: [phone]
Finland
Tel: [phone]
Plantronics Sarl
Noisy-le-Grand
France
Tel: [phone]
Plantronics BV
Regus House
Harcourt Centre
Harcourt Road
Dublin 2, Ireland
Service ROI: 1800 551 896
:רתאב רקב ,ףסונ עדימל
[phone]*
További információk:
[phone]*
Plantronics Acoustics
Italia Srl, Milano, Italia
Numero Verde: 800 950934
Plantronics B.V.
Hoofddorp, Nederland
NL 0800 7526876
BE 0800 39202
LUX 800 24870
Norge
Tel: [phone]
Aby uzyskać więcej informacji:
[phone]*
Portugal
Tel: [phone]
Pentru informaţii
[phone]*
Дополнительная
информация:
8-800-200-79-92
[phone]*
Sverige
Tel: [phone]
Daha fazla bilgi için:
[phone]*
en
cs
da
de
el
es
fl
fr
ga
he
hu
it
nl
ar
no
pl
pt
ro
sv
tr
ru

©2012 Plantronics, Inc. All Rights Reserved. Bluetooth
is a registered trademark of Bluetooth SIG, Inc. and
any use by Plantronics is under license. iPhone is a
trademark of Apple Inc., registered in the U.S. and other
countries. BlackBerry is the property of Research In
Motion Limited and is registered and/or used in the
U.S. and countries around the world. All other trade-
marks are the property of their respective owners.
87615-07 (05-12)
NEED MORE HELP?
Safety information:
see the separate “For Your Safety” booklet
2-year limited warranty details:
plantronics.com/warranty
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
plantronics.com/support
AЯ46
EEE Yönetmeliğine Uygundur