Polycom SoundStation Premier Mounting instructions

POLYCOM®
Advanced Teleconferencing Solutions
SoundStationPremier®Satellite
Installation Instructions
and User’s Guide
ENHANCED SOUND SYSTEM

Chapter 1 SoundStation Premier Satellite........................ 1-1
Chapter 2 SoundStation Premier Satellite With
Wireless Lavaliere Microphone........................2-1
Chapter 3 Optional Extended Microphones....................... 3-1
Chapter 4 Technical Specification & Warranty..................4-1
Table of Contents

SoundStation Premier Satellite
Chapter 1
Enhanced Sound System Installation Instructions and User’s Guide Addendum
1-1

INTRODUCTION
The SoundStation Premier®systems enhances audio conferencing by expanding speaker and
microphone coverage in conference rooms, and other conference areas.
This chapter covers installation and use of your SoundStation Premier Satellite system .
Please set up the SoundStation Premier base unit first, following the instructions in Chapter 1,
SoundStation Premier. Please note SoundStation Premier console replaces the Wall Module as a
power supply.
CHECKLIST OF PARTS
Your Polycom®SoundStation Premier Satellite system includes the following items:
If any of the included parts are missing, please contact your sales representative or Polycom
technical support, 1-800-451-0995.
BASIC SET-UP
The SoundStation Premier Satellite provides the following jacks at the rear of the unit:
▼One (1) RJ-11 jack for an external phone.
▼One (1) RJ-11 jack for an incoming telephone line. (10-foot RJ11 cable provided.)
▼One (1) RCA jack for connecting any popular tape recorder to record the conversation.
▼Two (2) external microphone jacks for optional SoundStation Premier external microphones.
▼One (1) RJ-45 jack to the SoundStation Premier console. (25-foot cable provided.)
▼One (1) power cord.
Enhanced Sound System Installation Instructions and User’s Guide Addendum
1-2
SoundStation
Premier ExM1 ExM2 Telephone line
Handset
(not available in some countries)
To power RCA
privacy phone
/
User Guide
Phone cords RJ-45 cable (25')
SoundStation Premier Satellite
Power cord
Wireless microphone
Battery pack
Optional Extended Microphones and Cables
Optional

1. Position the SoundStation Premier Satellite in the desired location.Avoid objects directly in
front of the unit. For optimum performance the SoundStation Premier Satellite should be placed
10' or farther from the SoundStation Premier console.
2. Plug the power cord into the nearest electrical outlet.
3. Ensure that the green LED on the SoundStation Premier Satellite is lit.
4. Connect the 25-foot connector cable to the jack labeled with the Console icon in the rear of
the SoundStation Premier Satellite unit. Connect the other end to the jack in the SoundStation
Premier unit.You should hear two distinct “bongs” after approximately 5 seconds.
5. Connect the standard telephone line (provided) to the nearest telephone wall jack. Be sure
to plug the telephone line into the jack labeled TEL LINE on the back of the ShowStation Premier
Satellite unit.
(25' Cable)
Enhanced Sound System Installation Instructions and User’s Guide Addendum
1-3

SoundStation
Premier ExM1 ExM2 Telephone line
Handset
(not available in some countries)
To power RCA
privacy phone
/
Enhanced Sound System Installation Instructions and User’s Guide Addendum
1-4
(25' cable)
RCA connector
Tape recorder
SoundStation Premier Satellite
SoundStation Premier
6. For privacy during a conference call, connect an external telephone (not provided) to the
SoundStation Premier Satellite. Use the RJ11 jack in the rear of the SoundStation Premier
Satellite module. (Not available in some countries)
When the telephone receiver is lifted, all microphones and speakers are disabled. When the
external telephone hangs up, the microphones and speakers are enabled.
7. To record a conversation, connect a standard tape recorder (not provided) to the RCA jack
at the rear of the SoundStation Premier Satellite.

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-1
SoundStation Premier Satellite
With Wireless Lavaliere Microphone
(Available in U.S. only)
Chapter 2

INTRODUCTION
The SoundStation Premier®systems enhances audio conferencing by expanding speaker and
microphone coverage in conference rooms, and other conference areas.
This chapter covers installation and use of your SoundStation Premier Satellite System with
wireless lavaliere microphone.
Please set up the SoundStation Premier base module first, following the instructions in Chapter 1,
SoundStation Premier. Please note SoundStation Premier console replaces the Wall Module as a
power supply.
▼The wireless microphone allows the speaker to have total freedom when addressing a group.
▼The wireless component of this unit is equipped with a patented security technology,
developed by Polycom, to ensure voice protection. To prevent interference, there are
five (5) available channels (in the 900 MHz band).
CHECKLIST OF PARTS
Your Polycom®SoundStation Premier Satellite system includes the following items:
If any of the included parts are missing, please contact your sales representative or Polycom
technical support, 1-800-451-0995.
BASIC SET-UP
The SoundStation Premier Satellite provides the following jacks at the rear of the unit:
▼One (1) RJ-11 jack for an external phone.
▼One (1) RJ-11 jack for an incoming telephone line. (10-foot RJ11 cable provided.)
▼One (1) RCA jack for connecting any popular tape recorder to record the conversation.
▼Two (2) external microphone jacks for optional SoundStation Premier external microphones.
▼One (1) RJ-45 jack to the SoundStation Premier console. (25-foot cable provided.)
▼One (1) power cord.
Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-2
User Guide
Phone cords RJ-45 cable (25')
SoundStation Premier Satellite
Power cord
Wireless microphone
Battery pack
Optional Extended Microphones and Cables
Optional
SoundStation
Premier ExM1 ExM2 Telephone line
Handset
(not available in some countries)
To power RCA
privacy phone
/

1. Position the SoundStation Premier Satellite in the desired location. Avoid having objects
directly in front of the unit. For the optimum performance, the SoundStation Premier Satellite
should be placed 10 feet or farther from the SoundStation Premier console.
2. Plug the power cord into the nearest electrical outlet.
3. The LED at the center of the console will light green when the power is on.
4. Connect the 25-foot connector cable to the jack labeled with Console provided in the rear
of the SoundStation Premier Satellite unit. Connect the other end to the jack labeled
SATELLITE in the SoundStation Premier unit.You should hear two distinct “bongs” after
approximately 5 seconds.
5. Connect the standard telephone line (provided) to the nearest telephone wall jack. Be sure
to plug the telephone line into the jack labeled TEL LINE on the back of the SoundStation
Premier Satellite unit.
Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-3
(25' Cable)

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-4
SoundStation
Premier ExM1 ExM2 Telephone line
Handset
(not available in some countries)
To power RCA
privacy phone
/
(25' cable)
Tape recorder
SoundStation Premier Satellite
SoundStation Premier
6. For privacy during a conference call, connect an external telephone (not provided) to the
SoundStation Premier Satellite. Use the RJ11 jack in the rear of the SoundStation Premier
Satellite module. (Not available in some countries)
When the telephone receiver is lifted, all microphones and speakers are disabled. When the
external telephone hangs up, the microphones and speakers are enabled.
7. To record a conversation, connect a standard tape recorder (not provided) to the RCA jack in
the rear of the SoundStation Premier Satellite

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-5
Transmitter Set-up:
1. Place the rechargeable battery pack (provided) into the transmitters battery compartment
located on the front of the unit.
2. Observe the correct polarity which is clearly marked in the battery compartment.
3. Set the transmitter into the recharging bay on the SoundStation Premier Satellite. It is
recommended that the batteries be charged for 8 hours before use. Standard AAA batteries can
be used but are not rechargeable, and pose no problems if the transmitter is docked in the
recharging bay.
4. Explanation of Console LEDs (indicator lights)as viewed while facing the unit.
LEFT LED-transmitter indicator
▼ A green LED indicates an established wireless communications link. A flashing red LED
indicates the wireless microphone is muted.
▼ No LED lite indicates no wireless communication established.
This can be an indicator of
a) Dead or no batteries in the transmitter or
b) the transmitter is out of range.
RIGHT LED-indicates transmitter charging
▼ A green LED indicates the transmitter is charging.
▼ No LED lite indicates the transmitter is either not docked in the console, or non-rechargeable
standard AAA batteries are in use.
▼ The LED at the center of the console indicates power is being supplied to the unit.
▼ The LED on the transmitter indicates low batteries when flashing.
Power switch
LED

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-6
Clip
to lavalier microphone
TO ENSURE BEST PERFORMANCE
▼Place the SoundStation Premier Satellite unit in a position unobstructed by other objects so
that users can hear clearly.
▼The acoustic environment should follow the same criteria covered in Chapter 1,
SoundStation Premier.
▼Check the battery condition indicator before using.
▼Position the lavaliere microphone six inches from your mouth.
USING THE SOUNDSTATION SATELLITE WIRELESS
LAVALIERE MICROPHONE
The Satellite Wireless Lavaliere Microphone is a state-of-the-art product which allows the speaker
to have complete freedom of motion during the presentation.
TO ENSURE BEST PERFORMANCE
▼Be sure the rechargeable battery pack included in the SoundStation Premier Satellite unit is
fully charged. In case of an emergency, three (3) non-rechargeable AAA alkaline batteries
may be used.
▼Place the wireless microphone in the recharging bay when not in use. Note that the LED
to the right of the recharging bay is red during charging and green when charge is complete.

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-7
USING THE WIRELESS TRANSMITTER
The wireless transmitter is a rugged compact body pack with attached lavaliere microphone, and
includes these special features:
▼Audio ON/OFF.
▼Rechargeable NiCad battery pack.
▼Battery compartment for quick pop-in battery replacement. Uses rechargeable battery pack
(included).
▼Low battery LED indicator.
▼Convenient 3-foot microphone cord provided.
1. To use-remove the transmitter from the console’s recharging bay.
2. Note the left LED on the console is lit green indicating the unit is ready to use.
3. If the LED on the transmitter is flashing red the unit needs to be recharged, or standard AAA
batteries can be used.
Power switch
LED

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-8

Enhanced Sound System Installation Instructions and User’s Guide Addendum
3-1
Optional Extended Microphones
Chapter 3

Enhanced Sound System Installation Instructions and User’s Guide Addendum
3-2
OPTIONAL EXTERNAL MICROPHONES
Connect the two (2) optional SoundStation Premier external microphones to the jacks provided at
the rear of the SoundStation Premier Satellite module, using the 10-foot microphone cables
provided.
TO ENSURE BEST PERFORMANCE
▼The acoustic environment should follow the same criteria covered in Chapter 1, of the
SoundStation Premier user guide.
▼Place the SoundStation Premier Satellite unit in a position unobstructed by other objects
so that users can hear clearly.
USING THE SOUNDSTATION PREMIER SATELLITE
To place a call:
Press ON/OFF to turn the SoundStation Premier on (Premier console LED’s are green). Listen for
the dial tone, then dial the number.
The SoundStation Premier Satellite functions as an extension of the main conference system,
allowing people in the outer areas of the room to hear and take part in the conference.
10' cables
(25'cables optional)
VOL
RINGER VOL
HOLDTHIS PHONE #
TONE / PULSE
ON/OFF B
A
C
E
D
F
N
M
O
K
J
L
H
G
I
U
T
V
P
Q
R
S
W
X
Y
Z
REDIAL
FLASH MUTE
SHIFT

Enhanced Sound System Installation Instructions and User’s Guide Addendum
3-3
To mute all microphones:
Press the MUTE button on either the remote, one of the SoundStation Premier external microphones
or the SoundStation Premier Console.
To resume two-way communications, press the mute button again.
ADJUSTING THE BALANCE
It is possible to adjust the relative volume between SoundStation Premier and SoundStation Premier
Satellite when the console unit is OFF HOOK,using the following procedure.
▼Press the SHIFT key.
▼To increase the relative volume of the SoundStation Premier console, press the VOL - KEY .
▼To increase the relative volume of the SoundStation Premier Satellite, press the VOL+ KEY.
The cursor position displayed on the LCD shows the balance graphically. When the cursor is all the
way to the left side of the display labeled PRE the satellite speaker is off. When the cursor is all the
way to the right side of the display labeled SAT,the console speaker is off. When both speakers are
equal volume, the cursor will be centered and will appear as an X.
ON/OFF
HOLD
MUTE
PROG STORE PAUSE
VOL
FLASH
REDIAL
123
456
789
0#
ONE-TOUCH DIALING
B
A
C
E
D
F
H
G
I
K
J
L
U
T
V
N
M
O
X
W
Y
Z
Q
P
R
S
VOL
RINGER VOL
HOLDTHIS PHONE #
TONE / PULSE
ON/OFF B
A
C
E
D
F
N
M
O
K
J
L
H
G
I
U
T
V
P
Q
R
S
W
X
Y
Z
REDIAL
FLASH MUTE
SHIFT

Enhanced Sound System Installation Instructions and User’s Guide Addendum
3-4
TO ENSURE BEST PERFORMANCE
▼Don't block transmitter from receiver's view.
▼Position the lavaliere microphone six inches from your mouth.
▼Be sure the rechargeable battery pack included in the SoundStation Premier Satellite unit is
fully charged. In case of an emergency, three (3) regular AAA alkaline batteries may be used.
▼Place the wireless microphone in the recharging bay when not in use. Note that the LED
to the right of the bay is red during charging and green when charge is complete.