Polycom SoundPoint IP 321 User manual

Barracuda Phone System
Polycom IP-321-331-335 Quick Reference Guide 1 / 4
Polycom IP-321-331-335 Quick Reference Guide
https://campus.barracuda.com/doc/45712692/
This article explains the basic operation of the Polycom IP-321, -331, and -335 devices.
Soft Keys
The three buttons immediately below the LCD display are soft keys.
Each soft key performs the action displayed immediately above it.
The soft key behavior is context sensitive – the soft key associated action changes according to
the current phone state.
Place a Call
Dial the desired internal extension or external number.
Lift the receiver or press the speakerphone or headset button to call.
Voicemail Access
To access voicemail messages, press the Messages key to the right of the keypad. If your
phone has no Messages key, dial *98. Depending on your system configuration, you may be
asked for your voicemail passcode.
Last Number Redial
Lift the receiver or press the speakerphone or headset button.
Press the Dial button twice.

Barracuda Phone System
Polycom IP-321-331-335 Quick Reference Guide 2 / 4
Call Hold
To place a call on hold, press the Hold soft key.
To resume the call, press Hold again.
Call Transfer
Attended Transfer
To transfer a call, press the Trans soft key.
Dial the destination number, then press Dial.
When the destination party answers, announce the caller, and press Trans again to complete
the transfer.
Blind Transfer
To transfer a call, press the Blind soft key and enter the destination number.
Press the Dial key to connect the remote party to the destination, and disconnect yourself from
the call.
Ad-Hoc Conference / 3-Way Calling
Place (or receive) a call.
To add another party to the call, press the Conf soft key.
Enter the destination number or extension and press Dial.
When the destination party answers, press the Conf soft key again.
All parties now join in a 3-way call.
Do Not Disturb
To enable Do Not Disturb Mode, press Menu, select Features, then select Do Not Disturb.
To resume normal operation, select Do Not Disturb again. The phone now receives calls
normally.
Call Forwarding

Barracuda Phone System
Polycom IP-321-331-335 Quick Reference Guide 3 / 4
To enable call forwarding, press Menu, then select Features, then select Forward.
Select the type of forwarding to enable, then select a destination.
The phone display indicates when call forwarding is enabled.
To deactivate forwarding, press the Forward soft key, press the forwarding type, then
press Disable.
Ringer and Handset Volume
To change the ringer volume, when the phone is idle, press the (–) or (+) button at the bottom
of the keypad.
To change the volume of a call, during an active call, press the (–) or (+) buttons to adjust the
volume of the handset, speakerphone, or headset, whichever is active.
Directories
To browse the phone contact list or call lists, press Menu, then Features, then Directories.
The call lists show missed, placed, and received calls.
Special Characters
When entering a destination with alphanumerics or special characters, be sure to pause
momentarily between key presses. For example, when dialing **<ext>, press *, pause for a
moment, press * again, then dial the extension.

Barracuda Phone System
Polycom IP-321-331-335 Quick Reference Guide 4 / 4
Figures
worddav99bad24b7d924b05b8d9e25c2b850957.png1.
© Barracuda Networks Inc., 2022 The information contained within this document is confidential and proprietary to Barracuda Networks Inc. No
portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of
an official representative of Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no
responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this
publication without notice.