Polycom VVXD60 User manual

The Polycom VVX D60 Wireless Handset and VVX D60 Base Station are accessories for the Polycom VVX
Business Media Phones, and the wireless handset enables you to manage calls to your line at any time
while you are away from your desk phone. .
The VVX handset requires one the following; a FairPoint provided, VVX business media phones to operate:
● VVX 310, 410, 500 and 600 business media phones
Please note: VVXD60 Handsets are not supported on transport services that are unmanaged by FairPoint or
remote locations other than where FairPoint installed this device. D60 handsets are not compatible with business
media phones equipped with optional VVX Side Car(s).
Polycom VVXD60 DECT Handset User Guide
LED Light –Call and Message Waiting Indicator
Color Display Screen
2 Soft Keys
4 Way Navigation & Select Keys / Volume Control
End Call Key
Call Key
Dial Key Pad
Mute Key
Redial Key
Speaker Phone Key
Headphone Port

Table of Contents
Handset Hardware Layout ...................................................................................................................................................... 4
Key Descriptions.................................................................................................................................................................. 4
Handset with Base Station Hardware Layout ......................................................................................................................... 5
Getting Started with the VVX D60 Wireless Handset ............................................................................................................. 6
Enable the VVX D60 Feature............................................................................................................................................... 6
Pair the Base Station with the VVX Phone.......................................................................................................................... 6
Pair with the Base Station using PC Port Pairing............................................................................................................. 6
Pair with the Base Station using Automatic Pairing........................................................................................................ 7
Registering Wireless Handset(s) ........................................................................................................................................ 7
Unregister the Wireless Handset ........................................................................................................................................ 8
Additional Handset(s) Hardware Layout............................................................................................................................. 8
Using Your VVX D60 Wireless Handset ................................................................................................................................... 8
Placing a Call ....................................................................................................................................................................... 9
Place a Call ...................................................................................................................................................................... 9
Place a Call with an Alternate Line.................................................................................................................................. 9
Place a New Call During a Call......................................................................................................................................... 9
Forwarding Calls.................................................................................................................................................................. 9
Answer an Incoming Call..................................................................................................................................................... 9
Answer an Incoming Call during a Call............................................................................................................................ 9
Reject an Incoming Call....................................................................................................................................................... 9
Hold a Call ......................................................................................................................................................................... 10
Resume Calls ................................................................................................................................................................. 10
Place an Intercom Call to Another Wireless Handset....................................................................................................... 10
Place an Intercom Call to Another Wireless Handset During a Call.................................................................................. 10
Transferring Calls .............................................................................................................................................................. 10
Announced-Warm Transfer of Call ............................................................................................................................... 10
Unannounced-Blind Transfer a Call .............................................................................................................................. 10
Initiate a Three-way - Conference Call.............................................................................................................................. 11
Split a Conference Call .................................................................................................................................................. 11
Join Calls into a Conference Call ................................................................................................................................... 11
Switch Between Calls .................................................................................................................................................... 11
Call Park............................................................................................................................................................................. 11

Retrieve Parked Calls .................................................................................................................................................... 11
Enhanced Call Park............................................................................................................................................................ 11
Retrieve Parked Calls .................................................................................................................................................... 12
End a Call........................................................................................................................................................................... 12
Redial a Number ............................................................................................................................................................... 12
Audio Adjustments............................................................................................................................................................ 12
Switch between the Earpiece and the Speakerphone.................................................................................................. 12
Adjust the Volume ........................................................................................................................................................ 12
Mute the Microphone................................................................................................................................................... 12
Access Voicemail Messages .............................................................................................................................................. 12
Do Not Disturb .................................................................................................................................................................. 13
Navigate the Handset Menus ............................................................................................................................................... 13
Directories and Speed Dials .................................................................................................................................................. 13
Contact Directory.............................................................................................................................................................. 13
Add a Contact to the Contact Directory........................................................................................................................ 13
View Contact Information............................................................................................................................................. 14
Sort the Contact Directory ............................................................................................................................................ 14
Call a Contact from the Contact Directory.................................................................................................................... 14
Edit Contacts in the Contact Directory.......................................................................................................................... 14
Delete a Contact from the Contact Directory ............................................................................................................... 14
Corporate Directory .......................................................................................................................................................... 15
Speed Dial ......................................................................................................................................................................... 15
Add a Speed Dial Entry.................................................................................................................................................. 15
Call a Speed Dial Entry .................................................................................................................................................. 15
Replace a Speed Dial Entry............................................................................................................................................ 15
Delete a Speed Dial Entry.............................................................................................................................................. 15
Call Logs............................................................................................................................................................................. 16
Missed Calls................................................................................................................................................................... 16
Received Calls................................................................................................................................................................ 17
Dialed Calls.................................................................................................................................................................... 17
Recent Calls................................................................................................................................................................... 18
VVX D60 Wireless Handset Settings.................................................................................................................................. 19
Set the Time and Date Format...................................................................................................................................... 19
Ring Type Settings......................................................................................................................................................... 19
Enable or Disable Keypad Tones ................................................................................................................................... 20

Set a Language .............................................................................................................................................................. 20
Set the Name of the Wireless Handset......................................................................................................................... 20
Multiline Setup.............................................................................................................................................................. 20
Additional Voicemail Information..................................................................................................................................... 20
CommPortal Dashboard - Graphical User Interface (GUI)................................................................................................ 21
Handset Hardware Layout
Key Descriptions
Soft Keys - select a menu item displayed above the key in the color screen display.
Navigation keys / OK button - Increase or decrease the ringer volume, scroll through menus, or move the
cursor within fields. Press center “OK” button to enter the main menu, select a highlighted item, or save an entry or
setting while in a menu.
Call button - Place or answer a call, or view recent calls.
End button - Hang up during a call or cancel the handset software update. Press and hold to power on or off
the wireless handset.
Dial Keypad - Enter numbers (0-9) or alpha characters.
Press and hold *to turn on or turn off the ringer.
Press and hold # to lock or unlock the keypad.
Press and hold 0to insert a plus sign (+) for international calls.
Speakerphone - Place or answer a call using the wireless handset speakerphone.
Switch between the wireless handset speakerphone and the wireless handset
earpiece during a call.
Redial button - Access the redial list.
Mute button - Mute or unmute the microphone during an active call.

LED Light - Flashes to indicate an incoming call, missed call, or new voicemail (Message Waiting Indicator –
MWI).
Headphone Port - Enables you to connect a headphone earpiece to the phone.
Handset with Base Station Hardware Layout
Find Button
Status Indicator
Handset Charger Cradle
Base Station –Supports Max 5 Handsets
Base Station Antenna

Getting Started with the VVX D60 Wireless Handset
Please Note: In most cases, this hardware set up and pairing will be completed for you by FairPoint resources. If your
phone and handset are all set up you can skip to the “Using Your VVX D60 Wireless Handset” section below.
Before you can begin using the VVX D60 Wireless Handset, your VVX business media phone must be
running UC Software 5.4.3 or later, and the VVX D60 feature must be enabled on your phone. When the feature is
enabled, you can pair the VVX D60 Base Station with your phone, then register the wireless
handset with the base station.
Enable the VVX D60 Feature
Before you can pair the base station with your business media phone, you need to enable the VVX D60
feature. To enable the VVX D60 feature, you need access to the Advanced settings menu on the VVX
business media phone. If you do not access to the Advanced Settings menu, contact your system
administrator.
To enable the VVX D60 feature:
1 On your VVX business media phone, navigate to Settings > Advanced.
2 Enter the administrator password for access to the menu. Please Contact our Support team at 855-588-9300
3 Select VVX D60 Configuration.
4 Select VVX D60 Profile, then select Enable.
Pair the Base Station with the VVX Phone
When the VVX D60 feature is enabled on your VVX business media phone, you can pair your base station
with the phone. You can choose to pair the base station in the following ways:
● PC port pairing
● Automatic pairing
When the base station is paired with the phone, the Handset icon displays on the VVX business media
phone.
Pair with the Base Station using PC Port Pairing
When the Ethernet cable is connected from the base station LAN port to the PC port on the VVX business media phone,
the phone pairs with the base station automatically. This is the most common connection architecture where the base
station is directly connected to the VVX business media phone that supports it. See Diagram 1
You cannot pair a base station with a VVX business media phone when a VVX Expansion Module is
connected to the phone. Disconnect any VVX Expansion Modules before pairing the VVX D60 basestation.

If for some reason the base station is no longer paired with the VVX business media phone, you can follow
the steps below to pair the base station with the phone again using PC port pairing.
To pair with the base station using PC port pairing:
1 On the VVX business media phone, navigate to Settings > Features > VVX D60 Configuration.
2 On the VVX D60 Configuration screen, select Base Station, and then select PC Port Pairing.
Diagram 1
Pair with the Base Station using Automatic Pairing
When an Ethernet cable is connected from the base station LAN port into any LAN outlet, all VVX business media phones
automatically display all base stations on the network as long as the devices are on the same network. This connection
architecture allows you to locate base stations at LAN switch locations throughout your network so that you are not tied
to any one physical phone location. This set up also enables you to select which base station to pair with your phone.
See Diagram 2
To pair with the base station using automatic pairing:
1 On the VVX business media phone, navigate to Settings > Features > VVX D60 Configuration.
2 On the VVX D60 Configuration screen, select Base Station, and then select Automatic Pairing.
3 Select a base station, then select Pair.
Diagram 2

Registering Wireless Handset(s)
After the VVX D60 Base Station is paired with the VVX business media phone, you can register up to a maximum of five
wireless handsets to the base station. Additional handsets, registered to a basestation only need a charging cradle to
function. See “Additional Handset(s) Hardware Layout” below.
To register a wireless handset:
1 On the wireless handset, navigate to Menu > Settings > Features > Registration.
2 Select Register.
3 Press and hold the FIND button on the base station for a few seconds.
4 Select Yes to confirm the registration with the base station.
When the registration is successful, the message “Registration Successful” displays.
Unregister the Wireless Handset
If you need to replace a wireless handset, unregister the wireless handset before you register the new
wireless handset to the base station.
To unregister a wireless handset:
1 On the wireless handset, navigate to Menu > Settings > Features > Registration.
2 Select Deregister.
The wireless handset displays a message confirming the deregistration.
3 Confirm you want to unregister the wireless handset.
When the wireless handset is no longer registered to the base station, the message “Deregistration
Successful” displays.
Additional Handset(s) Hardware Layout
Using Your VVX D60 Wireless Handset
You can perform many of the same call functions on the VVX D60 Wireless Handset as you do on your VVX business
media phone. This section includes the following call functions you can perform on the wireless handset.
● Placing a Call
● Forwarding Calls (Only Available Through CommPortal GUI)
● Answer an Incoming Call
● Hold a Call
● Place an Intercom Call to Another Wireless Handset
● Transferring Calls
● Initiate a Three way-Conference Call
● Park Calls
● End a Call
● Redial a Number
● Audio Adjustments
● Access Voicemail Messages
● Do Not Disturb –(Only Available Through CommPortal GUI)
Charging Cradle for additional handsets

Placing a Call
You can place a call using the default line or an alternate line.
Place a Call
By default, when you place a call on the wireless handset, the call is placed on the default line.
To place a call using the default line:
» Enter your contact’s number and press .
Place a Call with an Alternate Line
You can choose to use an alternate line before placing a call.
To place a call using another line:
1 Press Lines, and select a line. Please Note: the “Lines”softkey is only visible when multiple lines are a mapped to the
wireless headset(s).
2 Enter your contact’s number or select a contact from a directory or Recent Calls.
3 Press OK, to dial.
Place a New Call During a Call
You can place new calls to contacts during active calls.
To place a new call during a call:
1 During a call, press New Call.
2 Enter a contact’s number or choose a contact from the directory, then press Call.
If the called handset has multiple lines, choose a line, then press Call.
Forwarding Calls
Please Note: Although “Call Forwarding” appears as an option on the “Menu>Settings>Features” menu screen, this
software feature option does not work on Wireless handsets at this time.
Please Note: Call Forwarding can be activated and deactivated in your CommPortal web GUI interface.
Answer an Incoming Call
You can choose to answer incoming calls on the wireless handset.
To answer an incoming call:
» Press or .
Answer an Incoming Call during a Call
A tone plays when you receive an incoming call during an active call on the wireless handset.
To answer an incoming call during a call:
» Press or to answer the incoming call.
If you answered the incoming call, the first call is placed on hold automatically.
Reject an Incoming Call
You can reject rather than answer incoming calls on the wireless handset.
To reject an incoming call:
» Do one of the following:

Press . The call is rejected and the screen returns to the Home screen.
Hold a Call
You can place active calls on hold.
To hold a call:
During a call, press Options, then select Hold.
Resume Calls
You can resume any held call on the wireless handset.
To resume the call:
» Press Options, then select Resume.
Place an Intercom Call to Another Wireless Handset
Please Note: “Intercom” softkey is only available when multiple handsets are registered to a basestation.
You can create an intercom call with another wireless handset to quickly send an announcement.
To place an intercom call to another wireless handset when out of a call:
1 Do one of the following:
Press Menu > Intercom, then select the wireless handset you want to connect with, press Call.
Press , select Intercom, then Select the wireless handset you want to connect with
2 Press when you are done with your message.
Place an Intercom Call to Another Wireless Handset During a Call
You can create an intercom call with another wireless handset during an active call.
To place an intercom call to another wireless handset during a call:
1 During a call, press Options > Hold.
2 Press New Call, select Intercom, then select the wireless handset you want to connect with.
3 Press when you are done with your message, and resume the held call.
Transferring Calls
You can transfer a call to another wireless handset, to a directory contact, or to a designated number.
Announced-Warm Transfer of Call
You can transfer a call on your wireless handset to another contact to enable someone else to take the call or to resume
the call on another handset.
To transfer a call to another registered wireless handset or any other number:
1 During a call, press Options, then select Transfer.
2 Enter a number or select a contact from Directories or Recent Calls.
3 Press Call.
4 Talk with your contact, then press Transfer again to complete the transfer.
Unannounced-Blind Transfer a Call
You can transfer a call to another contact without speaking to the contact first.
To blind transfer a call:
1 During a call, press Options, then select Blind Transfer.
2 Enter a number or select a contact from Directories or Recent Calls.
3 Press Transfer.

Initiate a Three-way - Conference Call
You can initiate a conference call with two other contacts.
To initiate a conference call:
1 During a call, press New Call.
2 Enter your contact’s number or choose a directory contact, then press Call.
3 After the new call is answered, press Options > Conference.
Split a Conference Call
When you split a conference into two calls, both calls are placed on hold, and you can choose which call to make the
active call.
To split a conference call:
1 During a conference call, press Split.
2 Select which call you want to by pressing Option>Resume.
Join Calls into a Conference Call
When you have an active call and a held call on the wireless handset, you can join the two calls to make a single three
way call.
To join two calls into a conference call:
1 With one active call and one held call, press Options.
2 Navigate to Conference, then press Select.
A conference call is established.
Switch Between Calls
You can switch between calls when you have at least one active call and one held call on the wireless
handset.
To switch between calls:
» With one active call and a held call, press Swap.
Call Park
You can park the current call and retrieve it on another wireless handset or desk phone.
To park a call from a wireless handset:
During the call, press New Call and dial *53 and the Park Orbit number you wish to send the call to (for example *53201
would place the call in Park Orbit 201), then press Call, or
Retrieve Parked Calls
You can retrieve a parked call from any phone or wireless handset on the network.
To retrieve a parked call on a wireless handset:
Press New Call and enter the retrieval code *54, then the extension where the call is parked the call followed by a
pound sign (#).
For example, enter *54201# , then press Call, or .
Enhanced Call Park
If your host VVX phone line is provisioned with Enhanced Call Park; You can park the current call and retrieve it on
another wireless handset or desk phone.
To park a call from a wireless handset using Enhanced Call Park:
During the call, press New Call and dial *53, then press Call, or
Listen to your handset, the recording will tell you what Park Obit the call has been placed (for example 201).

Retrieve Parked Calls
You can retrieve a parked call from any phone or wireless handset on the network.
To retrieve a parked call on a wireless handset:
Press New Call and enter the retrieval code *54, then the extension where the call is parked the call followed by a
pound sign (#).
For example, enter *54201# , then press Call, or .
End a Call
You can end an active call at any time.
To end a call:
» Press or place the wireless handset in the base station or charging cradle.
Redial a Number
You can view and redial any call entries on your phone.
To redial a number:
» Press Redial Button located at the bottom, center of the Handset .
Audio Adjustments
You can control many of the audio functions on the handset, including using the speakerphone or earpiece, controlling
the volume, or muting the microphone.
Switch between the Earpiece and the Speakerphone
You can switch between listening to audio on the speakerphone and the earpiece.
To switch between the earpiece and speakerphone:
» During a call, press .
Adjust the Volume
You can increase or decrease the volume of the ringtone or call audio on your wireless handset.
To adjust the volume:
» Press the up or down arrows on the Navigation control to adjust the listening volume.
Mute the Microphone
During a call, you can mute the microphone to stop sending audio to the far end, and you can unmute the microphone
when you are ready to resume sending audio.
To mute and unmute your audio:
1 During a call, press to mute the microphone.
2 Press again to unmute the microphone
Access Voicemail Messages
You can access and listen to new voicemail messages from the wireless handset.
To access and listen to voicemail messages:
1 Press Menu, then select Messages.
2 Select the Message Center.
3 Choose a line if multiple lines are mapped to the handset, then press Select.

The wireless handset accesses the Message Center, enter your Voice Mail PIN and you can listen to new voicemail
messages.
Do Not Disturb
Please Note: Although DND appears as an option on the “Menu”screen, this software feature option does not work
on Wireless handsets at this time.
Please Note: DND can be activated and deactivated in your CommPortal web GUI interface.
Navigate the Handset Menus
The following table lists the menu structure on the VVX D60 Wireless Handset.
To navigate the menu:
1 On the wireless handset, press Menu.
2 Use the navigation keys to navigate the menu options.
3 Press OK or Select to enter that menu.
To return to the previous menu:
» Press Back.
To return to the Home screen:
» Press
Directories and Speed Dials
The VVX D60 Wireless Handset can access the phone’s Contact Directory and
Corporate Directory, if available on the phone.
You can perform the following tasks in each directory:
● In the Contact Directory, you can call, view, edit, delete or save any contact.
● In the Corporate Directory, you can view and search for corporate contacts. You can also call any
contacts in the list and add the contact to Contact Directory. You cannot edit or delete any of the
contacts in the Corporate Directory.
Contact Directory
You can call, view, delete, save, or edit contact information for any contact in the Contact Directory.
Add a Contact to the Contact Directory
You can add a new contact to the Contact Directory on the wireless handset.
To add a contact to the Contact Directory:
1 Press the Left navigation key < then select Add New Contact or navigate to Menu > Directories >
Add New Contact.
2 Enter the first name, then press .
3 Enter the last name, then press .
4 Enter the office number, then press .
5 If applicable, enter any additional numbers, then press .
6 Use the navigation keys or to select a ringtone.
7 Press Save to save the entry.

View Contact Information
Contact Directory entries display alphabetically, and you can select a contact to view the contact’s
information.
To view contact information:
1 Press the Left navigation key < then select Contact Directory, or navigate to Menu > Directories >
Contact Directory.
2 Enter your contact’s first name or the last name to search for your contact or press to navigate the
directory to your contact.
3 Press Options > View Details.
Sort the Contact Directory
You can sort the directory to quickly search for a contact.
To sort the Contact Directory:
1 Press the Left navigation key < then select Contact Directory, or navigate to Menu > Directories >
Contact Directory.
2 Press Options > Sort by.
3 Choose First Name or Last Name.
Call a Contact from the Contact Directory
You can call any contact stored in the Contact Directory from the wireless handset.
To call a Contact Directory entry:
1 Press the Left navigation key <, then select Contact Directory, or navigate to Menu > Directories >
Contact Directory.
2 Enter your contact’s first name or the last name to search for your contact or press to navigate the
directory to your contact.
3 Press Options > Call.
Edit Contacts in the Contact Directory
You can edit any contact in the Contact Directory from the wireless handset.
To edit a Contact Directory entry:
1 Press the Left navigation key < then select Contact Directory, or navigate to Menu > Directories >
Contact Directory, then press OK.
2 Enter your contact’s first name or the last name to search for your contact or press to navigate the
directory to your contact.
3 Press Options > Edit Contact.
4 Edit the contact’s information, then press Save to save the changes.
Delete a Contact from the Contact Directory
You can delete any contact in the Contact Directory from the wireless handset.
To delete a Contact Directory entry:
1 Press the Left navigation key < then select Contact Directory, or navigate to Menu > Directories >
Contact Directory.
2 Enter your contact’s first name or the last name to search for your contact or press to navigate the
directory to your contact.
3 Press Options > Delete.
4 Press OK to confirm deletion.

Corporate Directory
Although the “Corporate Directory”option appears when you press the Left navigation key < then select Corporate
Directory, or navigate to Menu > Directories > Corporate Directory, this feature is not presently available.
Speed Dial
You can assign your directory entries to a speed dial spot to quickly call a contact from the wireless handset. You can add
up to nine contacts as speed dial entries on the wireless handset.
Add a Speed Dial Entry
When you add a contact as a speed dial entry, you can quickly call that contact without needing to find the contact in a
directory.
To add a speed dial entry:
1 Press the Left navigation key < then select Speed Dial List, or navigate to Menu > Directories >
Speed Dial List.
2 Select an empty speed dial slot, then choose a directory or Manual Entry.
3 Enter the contact’s first name or the last name to search the directory or navigate the directory to
find the contact.
If you chose Manual Entry, enter the contact’s number.
4 Press Select to save the speed dial entry.
Call a Speed Dial Entry
You can quickly call a contact from the Speed Dial list.
To call a speed dial entry:
1 Press the Left navigation key < then select Speed Dial List, or navigate to Menu > Directories >
Speed Dial List.
2 Navigate to the desired speed dial, press Options, and select Call.
Replace a Speed Dial Entry
If a contact’s number has changed, or you want to change the Speed Dial entry, you can replace the current Speed Dial
entry with another contact.
To replace a speed dial entry:
1 Press the Left navigation key < then select Speed Dial List, or navigate to Menu > Directories >
Speed Dial List.
2 Navigate to the desired speed dial, press Options, and select Replace.
3 Choose a directory or select Manual Entry.
4 Enter the contact’s first name or the last name to search the directory or navigate the directory to
find the contact.
If you chose Manual Entry, enter the contact’s number.
5 Press Replace to save the new speed dial entry.
Delete a Speed Dial Entry
You can delete a contact from the Speed Dial list when you no longer need them as a Speed Dial.
To delete a speed dial entry:
1 Press the Left navigation key < then select Speed Dial List, or navigate to Menu > Directories >
Speed Dial List.
2 Navigate to the desired speed dial, press Options, and select Delete.
3 Select Yes to confirm deletion.

Call Logs
You can view the following types of call entries in the Call Logs:
● Missed calls –Record of calls that have been unanswered or missed by the user.
● Received calls –Record of calls that have been answered or received by the user.
● Dialed calls –Record of calls made or dialed by the user.
● Recent calls –Mixed record of the missed, received, and dialed calls.
● Remotely Answered - Record of calls to a shared line that were answered on another wireless
handset.
Missed Calls
This comprises all the calls that were missed by the wireless handset, and also the calls that were missed
because the line was busy. You can call, view details for, and delete missed call entries. You can also add
contacts to the Contact Directory from the Missed Calls list.
Call a Missed Call Entry
You can return a call to a missed caller from the Missed Calls list.
To call a missed call entry:
1 Press the Right navigation key > then select Missed Calls, or navigate to Menu > Call logs >
Missed Calls.
2 Navigate to the desired entry, press Options, and select Call.
View Details for a Missed Call Entry
You can view information for the missed call in the Missed Calls list.
To view details of a missed call entry:
1 Press the Right navigation key > then select Missed Calls, or navigate to Menu > Call logs >
Missed Calls.
2 Navigate to the desired entry, press Options, and select View Details.
Delete a Missed Call Entry
You can delete a missed call entry from the Missed Calls list.
To delete a missed call entry:
1 Press the Right navigation key > then select Missed Calls, or navigate to Menu > Call logs >
Missed Calls.
2 Navigate to the desired entry, press Options, and select Delete.
3 Select Yes to confirm deletion.
Delete All Missed Call Entries
You can delete all missed calls in the Missed Call list at one time.
To delete all missed call entries:
1 Press the Right navigation key > then select Missed Calls, or navigate to Menu > Call logs >
Missed Calls.
2 Press Options, and select Delete All.
3 Select Yes to confirm deletion.
Add a Missed Call Entry to the Contact Directory
You can add a call entry from the Missed Calls list to the Contact Directory.
To add a missed call entry to the Contact Directory:
1 Press the Right navigation key > then select Missed Calls, or navigate to Menu > Call logs >
Missed Calls.
2 Navigate to the desired entry, press Options, and select Add/Edit Contact.
3 Enter or edit the contact’s information, then press Save to save the contact to the Contact Directory.

Received Calls
This comprises all received calls. You can call, view details for, and delete received call entries. You can
also add contacts to the Contact Directory from the Received Calls list.
The following types of calls are listed in the Received Calls list:
● Received calls
● Forwarded calls
● Forwarded incoming calls
● Rejected calls
Call a Received Call Entry
You can call a recent contact from the Received Calls list.
To call a received call entry:
1 Press the Right navigation key > then select Received Calls, or navigate to Menu > Call logs >
Received Calls.
2 Navigate to the desired entry, press Options, and select Call.
View Details for a Received Call Entry
You can view information for the received call in the Received Calls list.
To view details of a received call entry:
1 Press the Right navigation key > then select Received Calls, or navigate to Menu > Call logs >
Received Calls.
2 Navigate to the desired entry, press Options, and select View Details.
Delete a Received Call Entry
You can delete a received call entry from the Received Calls list.
To delete a received call entry:
1 Press the Right navigation key > then select Received Calls, or navigate to Menu > Call logs >
Received Calls.
2 Navigate to the desired entry, press Options, and select Delete.
3 Press Yes to confirm deletion.
Delete All Received Call Entries
You can delete all received calls in the Received Call list at one time.
To delete all received call entries:
1 Press the Right navigation key > then select Received Calls, or navigate to Menu > Call logs >
Received Calls.
2 Press Options, and select Delete All.
3 Select Yes to confirm deletion.
Add a Received Call Entry to the Contact Directory
You can add a call entry from the Received Calls list to the Contact Directory.
To add a received call entry to the Contact Directory:
1 Press the Right navigation key > then select Received Calls, or navigate to Menu > Call logs >
Received Calls.
2 Navigate to the desired entry, press Options, and select Add/Edit Contact.
3 Enter or edit the contact’s information, then press Save to save the contact to the Contact Directory.
Dialed Calls
The calls that you have made are recorded under Dialed calls. You can call, view details for, and delete
dialed call entries. You can also add contacts to the contact directory.

Call a Dialed Call Entry
You can call a recent contact from the Dialed Calls list.
To call a dialed call entry:
1 Press the Right navigation key > then select Dialed Calls, or navigate to Menu > Call logs > Dialed
Calls.
2 Navigate to the desired entry, press Options, and select Call.
View Details for a Dialed Call Entry
You can view information for the dialed call in the Dialed Calls list.
To view details of a dialed call entry:
1 Press the Right navigation key > then select Dialed Calls, or navigate to Menu > Call logs > Dialed
Calls.
2 Navigate to the desired entry, press Options, and select View Details.
Delete a Dialed Call Entry
You can delete a dialed call entry from the Dialed Calls list.
To delete a dialed call entry:
1 Press the Right navigation key > then select Dialed Calls, or navigate to Menu > Call logs > Dialed
Calls.
2 Navigate to the desired entry, press Options, and select Delete.
3 Press Yes to confirm delete.
Delete All Dialed Call Entries
You can delete all dialed calls in the Dialed Calls list at one time.
To delete all dialed call entries:
1 Press the Right navigation key > then select Dialed Calls, or navigate to Menu > Call logs > Dialed
Calls.
2 Press Options, and select Delete All.
3 Select Yes to confirm deletion.
Add a Dialed Entry to the Contact Directory
You can add a call entry from the Dialed Calls list to the Contact Directory.
To add a dialed call entry to the Contact Directory:
1 Press the Right navigation key > then select Dialed Calls, or navigate to Menu > Call logs > Dialed
Calls.
2 Navigate to the desired entry, press Options, and select Add/Edit Contact.
3 Enter or edit the contact’s information, then press Save to save the contact to the Contact Directory.
Recent Calls
Recent calls records all the recent call activities, including Missed, Received, Dialed, and Remotely
Answered calls. You can call, view details for, and delete recent call entries. You can also add contacts to
the Contact Directory from the Recent Calls list.
Call a Recent Calls Entry
You can call a recent contact from the Recent Calls list.
To call a recent call entry:
1 Press the Right navigation key > then select Recent Calls, or navigate to Menu > Call logs >
Recent Calls.
2 Navigate to the desired entry, press Options, and select Call.

View Details for a Recent Calls Entry
You can view information for a recent call entry in the Recent Calls list.
To view details of a recent call entry:
1 Press the Right navigation key > then select Recent Calls, or navigate to Menu > Call logs >
Recent Calls.
2 Navigate to the desired entry, press Options, and select View Details.
Delete a Recent Call Entry
You can delete a recent call entry from the Recent Calls list.
To delete a recent call entry:
1 Press the Right navigation key > then select Recent Calls, or navigate to Menu > Call logs >
Recent Calls.
2 Navigate to the desired entry, press Options, and select Delete.
3 Press Yes to confirm delete.
Delete All Recent Call Entries
You can delete all missed calls in the Missed Call list at one time.
To delete all recent call entries:
1 Press the Right navigation key > then select Recent Calls, or navigate to Menu > Call logs >
Recent Calls.
2 Press Options, and select Delete All.
3 Select Yes to confirm deletion.
Add a Recent Call Entry to the Contact Directory
You can add a call entry from the Recent Calls list to the Contact Directory.
To add a recent call entry to the Contact Directory:
1 Press the Right navigation key > then select Recent Calls, or navigate to Menu > Call logs >
Recent Calls.
2 Navigate to the desired entry, press Options, and select Add/Edit Contact.
3 Enter or edit the contact’s information, then press Save to confirm.
VVX D60 Wireless Handset Settings
The VVX D60 Wireless Handset has a selection of settings that you can set to personalize the wireless
handset.
Set the Time and Date Format
You can choose how the time and date display on the wireless handset.
To set the time or date format:
1 Navigate to Menu > Settings > Preferences > Time & Date.
2 Select Clock Date, and choose a format.
3 Select Clock Time, and choose a format.
Ring Type Settings
You can set the ring type for external and internal calls.
Set the Ring Type for External Calls
External calls are any incoming calls from outside your network. You can set a ring type to distinguish these calls from
internal calls.
To set the ring type for external calls:
1 Navigate to Menu > Settings > Preferences > Ring Type.
2 Select External Calls, and choose a ring type.
A sample of the ring type plays as you scroll throug

Set the Ring Type for Internal Calls
Internal calls are incoming calls from within in your network. You can set a ring type to distinguish these calls from
external calls.
To set the ring type for internal calls:
1 Navigate to Menu > Settings > Preferences > Ring Type.
2 Select Internal Calls, and choose a ring type.
A sample of the ring type plays as you scroll through the list.
Enable or Disable Keypad Tones
By default, tones play when you press keys on the wireless handset. You can choose to disable this feature and stop
tones from playing when keys are pressed on the keypad.
To enable or disable keypad tones:
1 Navigate to Menu > Settings > Preferences > Keypad Tones.
2 Choose Turn on or Turn off, depending on the current setting.
The preference is saved.
Set a Language
You can choose the language that displays on the wireless handset.
To set the language:
1 Navigate to Menu > Settings > Preferences > Language list.
2 Choose your desired language.
Set the Name of the Wireless Handset
You can create a customized name with up to 15 characters for each wireless handset.
To set a name for the wireless handset:
1 Navigate to Menu > Settings > Preferences > Handset Name.
2 Edit the wireless handset name, then press Select to save the preference.
Multiline Setup
A MAXIMUM of 5 lines can be mapped to a wireless handset. You can set the default line that will be used automatically
for incoming and outgoing calls on the wireless handset. The set default line displays on the Home screen of the wireless
handset.
To set up multilines:
1 Navigate to Menu > Settings > Features > Multiline Setup.
2 Select the incoming line or outgoing line.
3 Press OK to confirm.
Additional Voicemail Information
When you have one or more unheard voice messages, your Handset will display a flashing red light in the upper
left hand corner.
From the Voicemail main menu:
oTo listen to your voice messages, Press 1
oTo work with your greetings, Press 3
oTo change mailbox settings, Press 4
o