Polycom VVX410 Instruction manual

Phone V i e w s
Your phone has three main Views: Home, Calls, and Lines
view (the default). You can access Home and Lines view
at any time. If your phone has one or more calls, you can
also access Calls view.
For Home view from any menu, press .
Press to alternate between Home and Lines view.
Calls Vi e w
If your phone has one or more calls, you can access Calls
view.
About Cal l s
Only one call can be active at one time.
You can use the handset, speakerphone, or headset for
calls. During a call, you can change modes by picking up
the handset, or by pressing or .
If you navigate away from your call(s), press to see
Active Call or Calls view again.
Polycom® VVX® 410 and
VVX® 411
Business Media Phones
Q ui c k U s e r G ui de
For use with Polycom® UC Software 4.1.4 or later
The information in this guide applies to both the VVX 400
and VVX 410 phones. Configurations vary and the screen
displays used in this guide may not reflect those on your
phone. See your system administrator for more
information. For detailed information on how to use your
phone, see the Polycom VVX 400 and 410 Business
Media Phone User Guide, available by navigating to your
phone’s Support page from Polycom Voice Support.
www.polycom.com | 1725-49088-001 Rev. A |March 2013
© 2013, Polycom, Inc. All rights reserved. POLYCOM®, the
Polycom logo and the names and marks associated with
Polycom’s products are trademarks and/or service marks of
Polycom, Inc. and are registered and/or common law marks in
the United States and various other countries. All other
trademarks are property of their respective owners. No portion
hereof may be reproduced or transmitted in any form or by any
means, for any purpose other than the recipient’s personal use,
without the express written permission of Polycom.
Home View
Home view displays icons you can select to access phone
functions.
You can use the right, left, up , and down arrow keys to
display more icons.
L ine s View
Lines view displays phone Lines, Favorites and soft keys.
If your phone is idle, you can press the Line key to access
the Dialer.
Tip: Referring to Soft Keys
In this guide, soft keys are referred to by their
name only. For example, to end an active call,
press End Call.
Call color indicates status:
• Dark green—Active call
• Bright blue—Incoming call
• Dark blue—Held call
Use the up and down arrow keys to select a call
(highlight it). The soft keys control the highlighted call.
E nt e r i ng Data
Use the dialpad keys to enter information. To backspace,
press Backspace .
To type with the dialpad keys, press a key repeatedly to
view the character options and stop to select.
To type other characters, press Encoding or Mode. When
using the dialpad keys, use the 1, *, 0, and # keys.
Tip: Switching Between Lines and Calls View
When in Calls view, switch to Lines view by
pressing More > Lines.
Switch back to Calls view by pressing More >
Calls.
Placing Cal l s
Pick up the handset, or press or . Enter the
phone number, and press Send.
Or enter the phone number first, then press Dial, pick up
the handset, or press or .
From Lines view: Press the phone Line key, enter the
phone number, and press Send.
From Home view: Select New Call using the left and right
arrow keys. Enter the phone number, and press Send.
Timesaver: Placing Calls Quickly
Select a recent call or Favorite, or select a
contact’s phone number in the Contact
Directory.
Answering C a ll s
To answer with the speakerphone, press or tap
Answer. To answer with the handset, pick up the
handset. To answer with a headset, press .
To answer a new call while on an active call, press
Answer. The current call will be held.

E n ding Cal l s
To end an active call, replace the handset, press , or
press . Or, press End Call.
To end a held call, navigate to Calls view and highlight
the held call. Press Resume, and press End Call.
Holding
Cal l s
From Calls view, press Hold or . Remember to
highlight the call first.
To resume a held call, press Resume or again.
Transferring Cal l s
From Calls view, press Transfer or , and call the
other party. When you hear the ringback tone, or after
you talk with the other party, press Transfer or
again. Press Blind to complete a transfer without waiting
for the ringback tone.
Forwarding
Cal l s
To enable call forwarding, press Forward from Home or
Lines view. Select the forwarding type to enable, enter a
forwarding number, and press Enable.
To disable call forwarding, press Forward from Home or
Lines view, select the forwarding type to disable, and
press Disable.
To enable per-call forwarding: As your phone rings, press
Forward, enter the forwarding number, and press
Forward.
Placing Conference Cal l s
Call the first party, and after the call connects, press
More, and select Confrnc. Then, dial and connect with
the second party and press Confrnc again.
From Lines or Calls view, you can:
• Press Hold to hold all participants.
• Press End Call to remove yourself from the call, but
keep the other participants connected.
• Press Manage (if available) to manage each
participant.
• Press Split to end the conference and hold all
participants.
Timesaver: Placing Conference Calls
If you have an active and held call, press Join to
set up a conference.
Fav o rit e s
Favorites are contacts you call most often. Your Favorites
list displays all your Favorites. A smaller number of
Favorites displays in Lines view.
• To view your Favorites list—From Home view, press
and select Directories> Favorites.
• To make a contact a Favorite—Navigate to your
Contact Directory and select the contact. Press Info,
press More, and select Add to Favorites. Press Yes to
confirm.
• To dial a Favorite—Press the Favorite from Home or
Lines view, or from your Favorites list.
Viewing Recent C a ll s
From Lines view, do one of the following:
• Press , select Directories, and select Recent Calls
to view your Recent Calls list.
• Press the right arrow key to view the recent Placed
Calls.
• Press the left arrow key to view the recent Received
Calls.
• Press the down arrow key to view the recent Missed
Calls.
• Press the up arrow key to view Favorites.
From the Recent Calls list, press Sort to sort and order
calls, press Type to display only certain calls, or select a
call record to call the person.
Contact Directory
To select a contact from the Contact Directory,
press .
• To view your Directory—Select Directories from
Home view. Press Contact Directory on the Directory
screen.
• To add a contact—Navigate to your Contact Directory
and press Add. Enter the contact’s information, and
press Save. To make a contact a Favorite, enter a
Favorite Index number.
• To update contact information—Navigate to your
Contact Directory and select the contact. Press Info,
press Edit, update the contact’s information, and press
Save.
• To delete a contact—Navigate to your Contact
Directory and select the contact. Press Info, press
Delete, and press Yes to confirm.
• To search for a contact—Navigate to your
Contact Directory and press Search. Enter search
criteria and press Search.
• To dial a contact from your Directory—Navigate to
your Contact Directory and select the contact. From
the contact’s information screen, select the contact’s
phone number.
Tip: What Does the Star Mean?
A star, , indicates a Favorite.
Listening to Voicemail
An envelope, , adjacent to a Line key, indicates that
you have voicemail. Select Messages from Home view or
press , and select Message Center. Press Connect
and follow the prompts. (or dial *96)
Muting the Microphone
During a call, press so other parties can’t hear you.
To disable Mute, press again.
This applies to calls using the handset, headset, and
speakerphone.
Using DoNot D i s t u r b
To enable or disable ringing, press DND from Home or
Lines view. When Do Not Disturb is enabled, the
DND icon, , displays in the status bar and beside the
appropriate Line key.
Adjusting Volume
To change call volume, press during a call. To
change the ringer volume, press when the
phone is idle or ringing.
Updating Ri ngto n e s
To change the incoming call ringtone, select Settings
from Home view, and press Basic > Ring Type. Select the
ringtone you want.
To set a ringtone for a contact, navigate to your
Contact Directory and select the contact. Press Edit,
update the contact’s ring type, and press Save.
Transfer Directly to Voicemail –from calls view
press transfer, press blind, dial 7 plus the extension
of the person you are trying to reach.
Call park –press transfer, press *94, listen for the
orbit number, hang up the phone.
Call Retrieve - *95 plus * and the orbit the call is
parked on. i.e. *95*1 (if call is parked on orbit 1)
Directed Call Pickup - *11
CommPortal –http://voicemail.um.shentel.net
Username: phone number (DID)
DID Check –311
Restart –Simultaneously press 0, 1, 3 until restart