Pro Breeze PB-H02 User manual

2500W Oil Filled Radiator | Model PB-H02
INSTRUCTION MANUAL

1 | English
2500W Oil Filled Radiator
Thank you for choosing to purchase a product from Pro Breeze. Please read the entire
manual carefully prior to first use and keep in a safe place for future reference.
WARNING: To avoid the risk of electrical shock, fire or injury to people, always
make sure the heater is unplugged from the electrical outlet before relocating,
servicing, or cleaning it.
SAFETY INSTRUCTIONS
This heater is intended for indoor use. Do not use outdoors.
Never leave this unattended while in use. Always turn the heater off and unplug
when not in use.
Do not use near water or expose the heater to water.
Keep the heater out of reach of children and pets. Children should be supervised
to ensure that they do not play with the heater.
Do not use the heater while sleeping or place it near a person who is sleeping.
Do not place this heater near flammable materials, surfaces or substances. Keep
combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9m) from the heater.
Use the heater in a well-ventilated area.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use gloves or oven mitts to avoid serious injury. Allow the heater to
thoroughly cool before handling.
Never insert fingers or metal objects into the vents or openings of the heater.
Never cover the heater. Do not use this heater to dry or heat clothes.
Do not cover the power cord. Arrange the cord where it will not be a trip hazard.
To avoid a circuit overload when using this heater, do not operate another
high-wattage heater on the same electrical circuit.
This heater is filled with a precise quantity of special oil. Repairs requiring opening
of the oil container are only to be made by the manufacturer or their service agent
who should be contacted if there is an oil leak.
The heater should not be used in a room of which the floor area is less than 5 M2.
Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock, or injury to persons.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

English | 2
Allow the heater to completely cool before handling or cleaning it.
Ensure the heater is in the “O” OFF position and the power cord is unplugged
from the electrical outlet before cleaning the heater.
Do not allow water or other liquids to run into the interior of the heater, as this
could create a fire and/or electrical hazard.
Do not use any abrasive cleaners or solvents, as heater damage will occur.
Rated Voltage & Frequency: 220-240V, 50Hz
Wattage: 2500W; 1500W; 1000W +/- 400W
-
-
-
-
PARTS
1
2
3
4
5
6
7
8
9
Castor Wheels
Power Switch Dial
Thermostat Dial
Indicator Light
Carry Handle
Front Cover
Radiator Fins
Cord Storage
24 Hour Timer
Specification
2
9
6
7
8
3
4
5
1

3 | English
SAFETY CONTROLS (THERMAL CUT-OFF)
This heater has two levels of overheat protection.
CAUTION: Only operate the radiator when in its normal upright position with the
castor wheels fitted to the bottom of the unit.
Automatic thermal cut-off: Switches off the heater in the event of overheating or
malfunction and resets it once the temperature drops to a normal level.
Thermal fuse: In the event that the automatic thermal cut-off fails to operate, the
heater has a thermal fuse which will cut the power. This is a non-resettable
switch which will have to be professionally replaced.
1.
2.
ASSEMBLY
Unpack the castor wheels and arc-shaped brackets from the heater packaging.
Turn the radiator upside-down on a scratch-free and stable surface to prevent
damage to the paint finish or your floor surfacing.
Fit the two (2) castor wheels onto the radiator by placing the arc-shaped
brackets between the outermost radiator fins on each side of the radiator.
Securely fasten the two (2) castor wheels onto the radiator by screwing two (2)
wing nuts onto each foot.
1.
2.
3.
4.
Turn the radiator back upright once the castor wheels have been fitted.5.

English | 4
OPERATION
Place the heater upright on a flat, steady and heat-resistant surface.
Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is
‘O’ OFF.
Insert the plug into a suitable socket.
Turn the power switch dial clockwise to the desired power:
• ‘I’ – Low Heat
• ‘II’ – Medium Heat
• ‘III’ – High Heat
1.
2.
3.
4.
Turn the thermostat dial clockwise until you hear a click and the light turns on.
The position of the click indicates the temperature of the room. Turning the
thermostat clockwise will keep the radiator on until the room gets warmer.
Turning it anti-clockwise will turn it off until the room has cooled to a lower
temperature and then it will switch on. The radiator automatically rotates through
an on-and-off cycle to maintain the current room temperature according to the
thermostat’s setting. It is normal for it to heat up and cool down periodically.
NOTE: IF THE HEATER DOES NOT TURN ON, ENSURE THE TIMER SWITCH
IS SET TO ‘I’.
To turn off the heater, turn the power switch dial anti-clockwise to “O” OFF.
Unplug the heater from the electrical outlet when it is left unattended or is not in
use.
5.
6.
7.

Triangluar Point
Segments
(Fig. 1) (Fig. 2)
Timer Switch
8 Segments Outwards
Current Time 8:00AM
5 | English
TIMER FUNCTION
Timer
Setting the Timer
The heater can be set to turn ON and OFF at the time you want. Before setting a
timer, the clock must be set to the correct time. Turn the dial clockwise until the
triangular pointer is pointing at the correct time. Do not turn the clock anti-clockwise.
There are 96 segments around the dial - each representing 15 minutes of the day.
Note: When you first use the heater, all 15 minute segments should be inwards. To
begin using the timer, push the segments outwards that represent the time of the
day you want the heater to work. The heater will switch off again after that period
has elapsed.
Plug in the heater.
Set the power and temperature to the desired settings.
Turn the dial clockwise to set the clock to the current time of the day.
Push the segments outwards for the period you want the heater on. For example,
the diagram above shows the heater will turn on between 1AM to 3AM (Fig.2).
Push the timer switch to the clock symbol.
Once you have set the segments for the desired heating period, the heater will
cycle on and off according to these settings.
Once unplugged, the heater timer will stop and will need to be reset.
1.
2.
3.
4.
5.
6.
7.

English | 6
CLEANING TIPS
DISPOSAL
Clean the exterior surface of the heater by wiping it with a soft, damp cloth.
Store the heater in a clean, dry place when it is not in use.
This marking indicates that this product should not be disposed of with
other household waste through the EU. This is to prevent possible harm to
the environment and human wellbeing. Contact your local authority for
information regarding the collection systems available. If possible, recycle
it responsibly to promote the sustainable reuse of resources.
-
-
Caution:
Allow the heater to completely cool before handling or cleaning it.
Ensure the heater is in the “O” OFF position and the power cord is unplugged
from the electrical outlet before cleaning the heater.
Do not allow water or other liquids to run into the interior of the heater, as this
could create a fire and/or electrical hazard.
Do not use any abrasive cleaners or solvents, as heater damage will occur.
-
-
-
-

2500W Oil Filled Radiator | Model PB-H02
One Retail Group
Labs Atrium
Stables Market
Chalk Farm Road
London
NW1 8AH
United Kingdom
WWW.PROBREEZE.COM