Pro-Form PFCCEL87078 User manual

®
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Keep this manual for future
reference.
Model No. FCCEL87078
Serial No.
Serial
Number
Decal
Patent Pending
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID UNNECESSARY
DELAYS, LEASE CALL
DIRECT TO OUR TOLL-FREE
CUSTOMER HOT LINE. The
trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8:00 a.m.–6:30 p.m.
Eastern Standard Time
(excluding holidays)
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
USER’S MANUAL
Write the serial number in the
space above for future reference.
All manuals and user guides at all-guides.com
all-guides.com

2
TABLE OF CONTENTS
IMPOR AN PRECAU IONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PAR IDEN IFICA ION CHAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW O USE HE ELLIP ICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MAIN ENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CONDI IONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PAR LIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMEN PAR S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
LIMI ED WARRAN Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
®
All manuals and user guides at all-guides.com

WARNING: Before beginning this or any exercise program, consult your physician. This is espe-
cially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. ICON assumes no responsibility for personal injury or property dam-
age sustained by or through the use of this product.
The decal shown at the right has been placed on
the elliptical exerciser. If the decal is missing, or
if it is not legible, please call our Customer
Service Department at 1-888-936-4266 to order a
free replacement decal. Apply the decal in the
location shown.
1. Read all instructions in this manual before
using the elliptical exerciser.
2. Use the elliptical exerciser only as described
in this manual.
3. It is the responsibility of the owner to
ensure that all users of the elliptical exercis-
er are adequately informed of all precau-
tions.
4. lace the elliptical exerciser on a level sur-
face, with a mat beneath it to protect the
floor or carpet. Keep the elliptical exerciser
indoors, away from moisture and dust.
5. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
6. Keep children under the age of 12 and pets
away from the elliptical exerciser at all
times.
7. The elliptical exerciser should not be used
by persons weighing more than 250 pounds.
8. Wear appropriate clothing when using the
elliptical exerciser. Always wear athletic
shoes for foot protection.
9. When mounting and dismounting the ellipti-
cal exerciser, always hold the handlebars or
the T-handle and step onto and off the pedal
that is in the lowest position.
10. Each time you stop exercising on the
elliptical exerciser, allow the pedals to come
to a complete stop before dismounting.
11. Always keep your back straight when using
the elliptical exerciser. Do not arch your
back.
12. If you feel pain or dizziness at any time
while exercising, stop immediately and
begin cooling down.
13. The elliptical exerciser is intended for in-
home use only. Do not use the elliptical
exerciser in a commercial, rental, or institu-
tional setting.
3
IM ORTANT RECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the ROFORM®485E.
All manuals and user guides at all-guides.com

4
BEFORE YOU BEGIN
Congratulations for selecting the PROFORM®485E
low-impact elliptical exerciser. he PROFORM®485E
is an incredibly smooth exerciser that moves your feet
in a natural elliptical path, minimizing the impact on
your knees and ankles. And the unique PROFORM®
485E features adjustable resistance, upper-body and
stationary handlebars, and a multi-mode exercise
monitor to help you get the most from your exercise.
Welcome to a whole new world of natural, elliptical-
motion exercise from PROFORM.
For your benefit, read this manual carefully before
you use the ROFORM®485E. If you have questions
after reading the manual, call our Customer Service
Department toll-free at 1-888-936-4266, Monday
through Friday, 8:00 a.m. to 6:30 p.m. Eastern
Standard ime (excluding holidays)
. o help us assist
you, please note the product model number and serial
number before calling. he model number is
PFCCEL87078. he serial number can be found on a
decal attached to the elliptical exerciser (see the front
cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Console
Resistance Knob
FRONT
BACK
LEFT SIDE Pedal Arm
Pedal Disk
Side Shield
Pedal
Book Holder
Upright
Water Bottle Holder
(bottle not included)
-Handle
Handlebar
All manuals and user guides at all-guides.com

5
ART IDENTIFICATION CHART
Use the chart below to identify the small parts used in
assembly. he number in parenthesis below each part
refers to the key number of the part, from the PAR
LIS on page 14. he number after the dash indicates
the quantity needed for assembly. Note: Some parts
may have been pre-attached for shipping. If a part
is not in the parts bag, check to see if it has been
pre-attached.
M10 Nylon Locknut (29)—4
Pedal Arm Spacer (41)—2*
Weld Spacer (49)—2 5/8” Axle Cap (57)—2*
3/4” Axle Cap (43)—4*
M6 Black Nylon Locknut (55)—2
Handlebar Spacer (39)—2
Rear Pedal Arm Bushing (11)—4
Pedal Arm Bushing (42)—4
M4 x 19mm Round
Head Screw (16)—6
M4 x 16mm Round
Head Screw (38)—4
M6 x 16mm Button Head Bolt (54)—2
* Extra parts may be included.
All manuals and user guides at all-guides.com

6
1. While another person holds the Upright (3) near the
Frame (1) as shown, gently pull the Resistance Cable
(26) and the Sensor Wire (25) out of the top of the
Upright until there is no slack between the Upright
and the Frame.
Slide the Upright (3) onto the welded bolts on the
Frame (1). Be careful to avoid pinching the
Resistance Cable (26) and the Sensor Wire (25).
ighten an M10 Nylon Locknut (29) onto each welded
bolt.
2. While another person holds the Console (6) near the
Upright (3), connect the console wire to the Sensor
Wire (25).
Feed the slack Sensor Wire (25) back down into the
Upright (3). Attach the Console (6) to the Upright (3)
with four M4 x 16mm Round Head Screws (38). Be
careful to avoid pinching the Sensor Wire.
Press the Resistance Control Knob (50) onto the
Resistance Control (26).
ASSEMBLY
Assembly requires two people. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires a phillips screwdriver , two adjustable wrenches , and a
rubber mallet .
1
3
1
25
26
29
Welded
Bolts
Console
Wire
3
50
26
25
6
38
2
All manuals and user guides at all-guides.com
all-guides.com

7
3. Find the Left Pedal (31), which has a ridge on the
right side. Attach the Left Pedal to one of the Pedal
Arms (12) with three M4 x 19mm Round Head
Screws (16) as shown.
Repeat this step to attach the Right Pedal to the other
Pedal Arm (not shown).
4. Identify the Left Handlebar (8) (there is an “L” sticker
on the Left Handlebar). Apply a thin film of the includ-
ed grease to the axle on the Left Handlebar.
Make sure that there are two Pedal Arm Bushings
(42) in each Pedal Arm (12).
Slide a Handlebar Spacer (39) and the Pedal Arm
(12) with the Left Pedal (31) onto the Left Handlebar
(8) as shown. (Note: hese parts fit tightly; it may be
helpful to use the rubber mallet.) Next, refer to the
PAR IDEN IFICA ION CHAR on page 5 and iden-
tify the 3/4” Axle Caps (43). ap a 3/4” Axle Cap onto
the Left Handlebar.
Repeat this step to attach the other Pedal Arm (12) to
the Right Handlebar (62).
5. Apply a thin film of the included grease to the axles
on the Upright (3). Slide a Weld Spacer (49) onto the
left axle on the Upright. Make sure that the open side
of the Weld Spacer is facing the Upright.
Slide a Pedal Arm Spacer (41) onto the left Crank
Arm (59).
Make sure that there are two Rear Pedal Arm
Bushings (11) in the Pedal Arm (12) attached to the
Left Handlebar (8).
With the help of another person, slide the Left
Handlebar (8) onto the left axle on the Upright (3)
while sliding the left Pedal Arm (12) onto the left
Crank Arm (59). (Note: hese parts fit tightly; it may
be helpful to use the rubber mallet. In addition, it may
be helpful to rotate the left Crank Arm (59) to a differ-
ent position.)
ap a 5/8” Axle Cap (57) onto the left axle on the
Upright (3).
ap a 3/4” Axle Cap (43) onto the left Crank Arm (59).
Repeat this step to attach the Right Handlebar and
the right Pedal Arm (not shown).
3
31
12
16
8
Apply
Grease
62
42
43
12
12
4
39
Ridge
31
5
59
41
11
12
49
57
3
43
8
Apply
Grease
All manuals and user guides at all-guides.com

8
7. he Console (6) requires two “AA” batteries (not
included). Alkaline batteries are recommended.
o install batteries, first locate the battery clip under
the Console (6). Insert two batteries into the battery
clip as shown. Make sure that the batteries are
turned so the negative ends of the batteries
(marked “–”) are touching the springs in the
battery clip.
8. Make sure that all parts are properly tightened before you use the elliptical exerciser. Note: here may
be some hardware left over after assembly is complete. Place a mat under the elliptical exerciser to protect the
floor or carpet from damage.
6
7
6
55
54
10
3
Batteries
Battery
Clip
6. Attach the -Handle (10) to the Upright (3) with two
M6 x 16mm Button Head Bolts (54) and two M6 Black
Nylon Locknuts (55).
All manuals and user guides at all-guides.com

9
HOW TO USE THE ELLI TICAL EXERCISER
HOW TO EXERCISE ON THE ELLI TICAL
EXERCISER
o mount the elliptical exerciser, firmly hold the han-
dlebars or the -handle and carefully step onto the
pedal that is in the lowest position. Next, step onto the
other pedal. Push the pedals until they begin to move
with a continuous motion. Note: The pedal disks can
turn in either direction; it is recommended that
you turn the pedal disks in the direction shown
below; however, to give variety to your exercise,
you may choose to turn the pedal disks in the
opposite direction.
o dismount the elliptical exerciser, allow the pedals
to come to a complete stop. CAUTION: The elliptical
exerciser does not have a freewheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the highest
pedal first. hen, step off the lowest pedal.
HOW TO ADJUST THE RESISTANCE OF THE
EDALS
As you exercise,
you can adjust
the resistance of
the pedals with
the resistance
knob on the
console. o
increase the
resistance,
turn the knob
clockwise; to
decrease the
resistance, turn the knob counterclockwise.
Pedal
Pedal Disk
Resistance Knob
All manuals and user guides at all-guides.com

10
DESCRI TION OF THE CONSOLE
he console is designed to help you get the most
from your workouts. As you exercise, you can watch
your progress around the LED track, while the
display provides continuous exercise feedback.
he six modes of the display are described below.
SPEED— his mode displays your current exercise
speed, in miles per hour.
IME— his mode displays the length of time you
have exercised. Note: If you stop exercising, the time
mode will pause until you resume.
DIS .— his mode displays the total distance you
have completed, in miles.
LAPS— his mode displays the number of 1/4-mile
laps you have completed around the LED track.
CAL.— his mode displays the approximate number of
Calories you have burned.
SCAN— his mode displays the speed, time, distance,
laps, and calorie modes, for 5 seconds each, in a
repeating cycle.
BATTERY INSTALLATION
Before the console can be operated, two “AA” batteries
must be installed. If you have not installed batteries,
see assembly step 7 on page 8.
HOW TO O ERATE THE CONSOLE
If there is a thin sheet of clear plastic on the face of
the console, remove it.
1. o turn on the power, press the “on/reset” button or
simply begin exercising. When the power is turned
on, one LED indicator will light in the LED track,
and the entire display will appear for two seconds.
he console will then be ready for operation.
2. Select one of the six modes:
Scan mode—
When the power
is turned on, the
scan mode will
automatically be
selected. One
mode indicator
will show that the
scan mode is selected, and a flashing mode indica-
tor will show which mode is currently displayed.
Note: If a different mode is selected, you can
select the scan mode again by repeatedly pressing
the mode button.
Speed, ime,
Distance, Laps, or
Calorie mode— o
select one of
these modes for
continuous dis-
play, press the
mode button repeatedly. he mode indicators will
show which mode is selected. (Make sure that the
scan mode is not selected.)
3. he LED track represents a distance of 1/4 mile. As
you exercise, the indicators around the track will
light one at a time until you have completed 1/4
mile. A new lap will then begin.
4. o reset the display, press the “on/reset” button.
5. o turn off the power, simply wait for about four
minutes. Note: The console has an “auto-off”
feature. If the pedals are not moved and the
console buttons are not pressed for four
minutes, the power will turn off automatically
in order to conserve the batteries.
Mode Indicators
LED rack
All manuals and user guides at all-guides.com