Pro-Form HYBRID TRAINER User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. PFEL05814.0
Serial No.
Write the serial number in the space
above for reference.
USER’S MANUAL
www.proform.com
Serial Number
Decal
To register your product and
activate your warranty today,
go to www.proformservice.com/
registration.
For service at any time, go to
www.proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
ACTIVATE YOUR
WARRANTY
CUSTOMER CARE

2
WARNING DECAL PLACEMENT
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO USE THE HYBRID TRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
This drawing shows the location(s) of the warning decal(s).
If a decal is missing or illegible, see the front cover
of this manual and request a free replacement decal.
Apply the decal in the location shown. Note: The
decal(s) may not be shown at actual size.
Google Maps is a trademark of Google Inc.
IFIT is a registered trademark of ICON Health & Fitness, Inc.
PROFORM is a registered trademark of ICON Health & Fitness, Inc.

3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your hybrid trainer before using your hybrid trainer.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. It is the responsibility of the owner to ensure
that all users of the hybrid trainer are ade-
quately informed of all precautions.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
3. Use the hybrid trainer only as described in
this manual.
4. The hybrid trainer is intended for home use
only. Do not use the hybrid trainer in a com-
mercial, rental, or institutional setting.
5. Keep the hybrid trainer indoors, away from
moisture and dust. Do not put the hybrid
trainer in a garage or covered patio or near
water.
6. Place the hybrid trainer on a level surface,
with at least 3 ft. (0.9 m) of clearance in the
front and rear of the hybrid trainer and 2 ft.
(0.6 m) on each side. To protect the floor or
carpet from damage, place a mat under the
hybrid trainer.
7. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
8. Keep children under age 12 and pets away
from the hybrid trainer at all times.
9. The hybrid trainer should not be used
by persons weighing more than 350 lbs.
(159 kg).
10. Wear appropriate clothes while exercis-
ing; do not wear loose clothes that could
become caught on the hybrid trainer. Always
wear athletic shoes for foot protection while
exercising.
11. Hold the handlebars or the upper body arms
when mounting, dismounting, or using the
hybrid trainer.
12. Make sure that the pedal knobs are fully
tightened each time you use the hybrid
trainer.
13. The heart rate monitor is not a medical
device. Various factors may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in determining heart rate trends in general.
14. The hybrid trainer does not have a freewheel;
the pedals will continue to move until the
flywheel stops. Reduce your pedaling speed
in a controlled way.
15. Keep your back straight while using the
hybrid trainer; do not arch your back.
16. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.
IMPORTANT PRECAUTIONS

4
all
STANDARD SERVICE PLANS

5
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM®
HYBRID TRAINER. The HYBRID TRAINER provides
an impressive selection of features designed to make
your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the hybrid trainer. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Length: 6 ft. 4 in. (193 cm)
Width: 2 ft. 2 in. (66 cm)
Handlebar
Seat
Console Knob
Console
Tab l et Ho l der
Pedal
Pedal Brace
Pedal Knob
Heart Rate Monitor
Backrest
*Water bottle is
not included
Water Bottle Holder*
Upper Body Arm

6
M10 x 65mm Screw (40)–4
M10 x 60mm Bolt (61)–1
M10 x 54mm Screw (97)–1
M8 Locknut
(10)–10
M10 Locknut
(48)–1
M6 Locknut
(51)–4
M8 x 125mm Bolt (58)–2
M8 Split
Washer
(42)–8
M6 Curved
Washer
(25)–4
M10 Curved
Washer (39)–3
M8 Large
Washer (54)–4
Wave Washer
(81)–4
M8 Small
Washer
(93)–4
M8 x 40mm Bolt (83)–6 M8 x 65mm Bolt (94)–2
M8 x 20mm
Screw (34)–4
M4 x 16mm
Screw (47)–8
M6 x 30mm
Bolt (49)–4
M8 x 13mm
Screw (95)–6
M10 x 25mm
Screw (96)–1
M10 Split
Washer (98)–2
#8 x 12mm
Screw (102)–4
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.

7
• To hire an authorized service technician to
assemble the hybrid trainer, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish assembly.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
2. With the help of a second person, place some
of the packing materials (not shown) under the
Rear Frame (1). Have the second person hold
the Rear Frame to prevent it from tipping
while you complete this step.
OrienttheRearStabilizer(6)sothatthelarge
holes are facing the Rear Frame (1). Attach
the Rear Stabilizer to the Rear Frame with two
M10 x 65mm Screws (40).
Then,removethepackingmaterialsfromunder
the Rear Frame (1).
2
40
1
6
Large
Holes
1. Go to www.proformservice.com/registration
on your computer and register your product.
•activates your warranty
•saves you time if you ever need to contact
Customer Care
•allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) and register your product.
1

8
4
4. Set the Front Frame (23) near the Rear Frame
(1) as shown.
ConnecttheLowerWire(45)intheRearFrame
(1) to the Upper Wire (105) and the Power Wire
(99) in the Front Frame (23).
23
99
45
105
1
3
3. Orient the Front Stabilizer (2) so that the large
holes are facing the Front Frame (23). Attach
the Front Stabilizer to the Front Frame with two
M10 x 65mm Screws (40).
40
23
2
Large
Holes

9
5
23
Hexagonal Hole
96
48
39
98
98
39
61
97
1
5. Tip: Avoid pinching the wires. Slide the Front
Frame (23) onto the Rear Frame (1).
AttachtheFrontFrame(23)withan
M10 x 25mm Screw (96), an M10 Split Washer
(98), and an M10 Curved Washer (39). Do not
tighten the Screw yet.
Next, attach the Front Frame (23) with an
M10 x 54mm Screw (97), an M10 Split Washer
(98), and an M10 Curved Washer (39). Do not
tighten the Screw yet.
Then, attach the Front Frame (23) with an
M10 x 60mm Bolt (61) and an M10 Locknut (48);
make sure that the Locknut is in the hexago-
nal hole. Do not tighten the Bolt yet.
Seesteps2and3.Make sure that the ends of
the Rear Stabilizer (6) and the Front Stabilizer
(2) are touching the floor.
Tighten the Bolt and the Screws (61, 96, 97).
Avoid pinching
the wires
6
6. Hold the Console Post (73) near the Front Frame
(23) as shown. Insert the Upper Wire (105)
upward through the Console Post.
73
105
23

10
7
7. Tip: Avoid pinching the Upper Wire (105).
Slide the Console Post (73) onto the Front
Frame (23) and hold it in place.
Next,inserttheAxle(80)intotheConsolePost
(73) and into the Front Frame (23). Center the
Axle.
Then,tightentheConsoleKnob(9)withanM10
Curved Washer (39) into the Console Post (73)
and into the Front Frame (23).
73
9
39
105
80
23
Avoid pinching the
Upper Wire (105)
8
8. Identify the Left Upper Body Leg (74) and the
Right Upper Body Leg (86).
Usingaplasticbagtokeepyourfingersclean,
apply a generous amount of the included grease
to each side of the Axle (80) and to two Wave
Washers (81).
Next,slidethetwoWaveWashers(81)andthe
Upper Body Legs (74, 86) onto the Axle (80);
make sure that the Upper Body Legs are on
the correct sides.
Then,tightenanM8x20mmScrew(34),aPivot
Cover (90), and an M8 Large Washer (54) into
each end of the Axle (80) at the same time.
86
54
54
Grease
Grease
74
90
90
34
34
81
81
80