Promate Beam User manual

5200mAh Multi-function
Power Bank with Electronic
Lighter and Flashlight
User Guide
Beam
Environmentally
Safe
UV Beam

Go green with Beam, a one of a kind Power Bank with an electronic flameless
lighter. Not only does this backup battery charge your smartphone but even helps
you light things up when a source of fuel is not available. Additionally Beam features
an emergency LED light and UV Light to check authenticity of bank notes. Beam, An
all in one back up battery that meets your every need.
• Beam back-up battery
• Micro-USB Charging Cable
• User Guide
Battery Capacity: 5200mAh
Input: DC 5V, 0.8A
Output: DC 5V, 2.0A
Battery Type: Li-ion Battery
Input Type: Micro-USB Charging port
Output Type: USB Charging port
Introduction
Packaging Contents
Specification:
1

Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or attached
products.
1. Do not disassemble the back-up battery or attempt to fix it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this Back-up battery or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the
battery to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery, discontinue
use immediately.
9. If you find that the battery is too hot, emitting an odor, deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
10. Always charge this product before extended storage.
• 5200mAh Backup Battery
• Universal USB port to charge any kind of 1A USB powered device
• Flameless and no fuel required electronic lighter
• Environmentally safe
• Over-current, Over-voltage, Over-charge and Short-circuit Protection
• Ultra-bright LED emergency light
• UV beam for counterfeit note checking
Features:
Precautions
2

1. 2A output port
2. 5V /0.8A Input port
3. Multi-function Button
4. Charge Indicator
5. LED Light
6. UV Light
7. Electronic lighter
Appearance & Interface Description:
3
3
6
2
7
4
1
5

Plug the Micro-USB end of the charging cable provided into the Micro-USB charging
port in Beam back-up battery. Connect the other end of the Micro-USB charging cable
to a USB power adapter or computer USB port. The battery level indicator LED’s
light up indicating that the back-up battery is charging normally.
2. Charging Beam back-up battery
Operation Instructions:
4
1. Checking the remaining power left in Beam back-up battery
Tap the Multi-Function button once to view the amount of power remaining in
Beam.
No. of LED’s Active 1 2 3 4
% of power remaining <=25% <=50% <=75% <=100%

3. Charging USB chargeable devices using Beam
4. Using the LED on Beam
There is 1 port available on Beam. Plug the USB cable into the USB output
port on Beam back-up battery and the other end into the device. The device
will now automatically start charging. Detach the USB cable once charging is
complete.
• Press the multifunction button twice to turn on the LED located on the
front of the product.
• Press the multifunction button twice again to turn off the LED located on
the front of the product.
5

5. Using the UV light on Beam
• Press and hold the multifunction button to turn on UV light located on the
front of the product.
5. Using electronic lighter on Beam
• open the cap, press and hold the button
6