Promate proVolta.12 User manual

User Guide
proVolta.12
12,000mAh Power Bank
for Smartphones and Tablets

1
Easily portable, proVolta.12 is the ultimate power bank with remarkable
12000mAh power capacity. It can provide charge for all your portable devices, such
as smartphones and even Tablets. Unique, compact and multifunctional,
proVolta.12 additionally features a remarkably bright side LED-light, which can be
used as a torch. Optionally switch to choose charging of smartphone or tablet
devices and meanwhile keep track on its capacity. proVolta.12 is the power bank
for all.
proVolta.12
User Guide
Charging Cable
Warranty Card
Pouch
Capacity: 12000 mAh
Input: DC 5V 1.6A
Output: DC 5V 1A/ 2A
Introduction
• 12000mAh High-capacity Portable power bank
• Advanced Li-Polymer battery with excellent performance
• Ultra-bright LED emergency light
• Compatible with smartphones and tablets
• In-built short circuit and over-charging protection
• Smart LED charging and discharging status indicator
• Charting Voltage switch
• Charging capacity indicator
Features
Packing Contents
Specifications

2
1. USB Output Port
2. Power/Function Button
3. LED Battery Status Indicators
4. LED Emergency light
5. Micro USB lnput Port
Product Diagram
Press the ON/OFF button. The indicator LEDs will light up and show the remaining
battery capacity.
The LED will automatically switch off after 10 seconds if the device is not in use.
- 100-70% remaining capacity
- 70-30% remaining capacity
- Around 30% of battery remaning
Capacity Indicators

3
Charging the proVolta.12
Note: Please keep your proVolta.12 charging for 8 hours when used for the first
time.
To charge the proVolta.12 use the USB cable included in the packaging box.
Simply connect the proVolta.12 to any computer or USB charger. When
connected to a power source, the battery LEDs will start blinking indicating the
battery capacity status. When the battery is full, all light will light in solid blue.
Charging your device through proVolta.12
Connect your device to proVolta.12 using your device’s USB charging cable.
Short press the power button. Your device will then start charging.
proVolta.12 will automatically switch off when charging is complete.

4
Output Current Switch
proVolta.12 has the function of dual regulated output.
While the device is off, short press the power button. The first LED will light up
in green. This is to indicate that the Output Current is 1A, suitable for charging
smartphones.
Short press the button again and the LED will turn to red. The Output Current is
2A, and you can charge devices, which require larger current input, such as iPad
and other tablets.
LED Light
proVolta.12 has an ultra-bright emergency light located on the side of the
product.
To switch on the LED light, press and hold the power button will light on.
To switch it off hold and press the power button for 2 seconds again.
Care & Maintance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• When not in use, disconnect all chargers and cables from the device.
• Make sure to fully charge and then discharge the device every three months,
especially when not being used for a period of time.
• Store in a cool dry place.
• Keep all accessories and enhancements out of reach of small children.
• Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.

• Do not attempt to open the device.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.