Promate bluPen.2 User manual

bluPen.2
Multifunctional Bluetooth™ Stereo Mini-Handset
with Stylus Pen
User Guide

Introduction
Thank you for purchasing Pro ate bluPen.2 Multifunctional Bluetooth™ Stereo Mini-Handset
with Stylus Pen. This ini-handset has been created with ultiple functions, perfect power
and sync quality, ultra-high reliability and uniquely fined outlook.
Hereby stated are the features for this product for better understanding of its functions.
• Stereo Bluetooth™ ini-handset
• Detachable conductive silicone stylus pen
• Multifunctional buttons for call, tracks and volu e controls
• High-quality audio earphones
• Dual ultra-sensitive icrophone
• Vibration echanis for inco ing call
• 5th Gen CVC® Noise suppression and echo cancellation
• Dual- icrophone audio algorith offering enhanced near and far noise reduction
• Make, receive and cancel calls all while listening to usic
• Co patible with s artphones, tablets and all Bluetooth™ enabled audio devices
• Exquisite, pocket friendly and ini design for ulti ate portability
Packaging Contents
• bluPen.2
• Micro-USB cable
• Earphones with earbud replace ents
• Stylus tip
• User Guide
• Warranty card
Precautions
Please read this User Guide carefully before using the product.
The contents herein ay be changed to deliver the better services to the end-user. To keep
the perfect perfor ances of the product, never use it in cold, hot, dusty or oistened areas or
places, especially in the following conditions:
1. Moist or underwater conditions.
2. Conditions near the heater or high-te perature service.
3. Conditions with direct sunshine.
4. Conditions with apt falling.
5. Never dis antle the product without due per ission, otherwise it ay nullify the
warranty clauses.

1. Product Overview
Introduction
The bluPen.2 is a ultifunction gadget built for touch-screen s artphones and tablets.
Bluetooth™ pairing with the device, the bluPen.2 serves pri arily as a call handset using its
ultra-sensitive ic and in-built stereo ini-speaker. Enhances the audio with its included
earphones and specially designed 5th Gen CVC® CSR chipset for superb noise suppression
and echo cancellation for a crystal clear sound quality. bluPen.2 also carries a vibration
echanis for a quiet inco ing call notification. Its secondary feature allows the device to be
a conductive stylus pen by replacing its tip and use it for any touch-screen devices for a ore
precise swiping, drawing or even writing. The bluPen.2 is si ply a co plete solution for
touch-sensitive obile and tablet devices.
2. Appearance and Interface Description
1 3.5 audio jack
2 Microphone
3 Status indicator
4 Volu e +/-
5 Charging jack
6 Capacitive stylus
7 Microphone
8 Multifunction button
9 Dustproof receiver

3. Instructional Usage
3.1 Charging
1. Connect the Micro-USB charging cable on the charging port.
2. Red LED lit up to shows it is charging.
3. Red will turn into blue once fully charged.
3.2 Pairing
1. Press and hold the ultifunction button about 7 seconds to switch on the
ini-handset, it auto atically enters the pairing ode. The red and blue indicator
lights flashes alternately.
2. Activate the Bluetooth™ feature on your phone or other Bluetooth™ devices and set it
to search for new Bluetooth™ devices.
3. Select "bluPen.2" fro the list of found devices on your phone or other Bluetooth™
devices and connect. If necessary, enter passcode 0000 to pair and connect the
headset to your device. Now you can use bluPen.2 for phone calls or listening to
usic.
3.3 Basic Operation

Function Operation LED status Alerts Explanation
Receive a call Short press any key to
answer the call
Blue Constinuous sound and
vibration alert
With continuous pro pt
tone for inco ing call
End a call Short press the
ultifunction button
N/A N/A Or end the call with the
obile device
Reject a call Long press the vol - or vol
+ button for 2 seconds
N/A With beep alerts Long press the vol - or vol
+ button for 2 seconds
Last nu ber redial Double short press the
ultifunction button N/A N/A
The obile w ill redial the
last dialled by double
short press the
ultifunction button
Voice dial Press the vol - and vol +
si ultaneously N/A N/A
This function depends if
supported by the obile
device
Call transfer to
obile device
Long press the vol - button
for 2 seconds N/A N/A
Call will be transferred to
the obile device, audio
will auto aticall
transferred back to
bluPen.2 after ending the
call
Mute ode Long press the vol +
button for 2 seconds
N/A N/A Mute ode w ill stay until
the end of the call
Volu e up Short press the vol +
button N/A N/A
Short press the vol +
button to increase the
volu e
Volu e down Short press the vol -
button N/A N/A
Short press the vol -
button to decrease the
volu e
Previous song
Long press the vol - button
for 2 seconds N/A N/A
Long press the vol - button
to go to the previous song
Next Song Long press the vol +
button for 2 seconds N/A N/A
Long press the vol +
button to go to the next
song
Music pause/play
Press the ultifunction
button to pause/play the
usic
N/A N/A
Music will pause after
short press of the
ultifunction button, and
press again to play
Headset reset
On standby status, press
and hold the ultifunction
button and connect the
charging cable
N/A N/A
Press and hold the
ultifunction button and
connect the charging cable
while the ini-handset is
on
Battery low alerts N/A
Red LED
flashes
every 8
seconds
Will beep every 30 seconds Flashes Red LED when
battery is low
Delete paired
devices list
Press the vol - and vol +
si ultaneously, after 4
seconds, connect the
charging cable
Blue LED
flashes 3
ti es
The paired devices list will
be deleted